Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
27 results
Search Results
Article Nadir Toprak Elementi Katkılı Kimyasal Çöktürme Titanya Tozları ile Yapay Fotosentezle Hidrojen Üretimi(Dokuz Eylül Üniversitesi, 2015) Yurtsever, Hüsnü Arda; Çiftçioğlu, MuhsinBu çalışmada nadir toprak elementi (NTE) katkılı/katkısız titanya (TiO2) tozları yapay fotosentezle fotokatalitik hidrojen eldesine yönelik uygulamalarda kullanılmak üzere kimyasal çöktürme/birlikte çöktürme yöntemi ile hazırlanmıştır. Düşük ısıl işlem sıcaklıklarında yüksek yüzey alanlarından dolayı yüksek hidrojen üretim miktarları elde edilmiştir. Yüzey aktivitesi bakımından ise 700 oC’de ısıl işlem görmüş katkılı tozların diğer tüm saf tozlara göre birim alan başına daha fazla hidrojen ürettiği saptanmıştır. NTE katkısı ile TiO2’in faz yapısında değişiklikler meydana getirilmiş, optimum anataz-rutil faz oranına sahip ve ışık soğurma kapasitesi yüksek bir nanoyapı elde edilmiştir. Katkıyla tozlarda oluşturulan bu özellikler görece düşük bir miktar olan % 0,1 katkı düzeyinde bile TiO2’in fotokatalitik aktivitesinin birkaç kat artmasını sağlamıştır.Article Citation - WoS: 10Citation - Scopus: 9Bi̇yomalzemelerden İ̇zole Edi̇len Staphylococcus Epidermidis Suşlarinin Yüzey Özelli̇kleri̇ni̇n Beli̇rlenmesi̇(Ankara Mikrobiyoloji Derneği, 2010) Sudağıdan, Mert; Erdem, İlker; Çavuşoğlu, Cengiz; Çiftçioğlu, MuhsinThe surface properties of bacteria play an important role on adhesion to the biomaterial surface. In this study, the surface properties of Staphylococcus epidermidis strains isolated from clinically used polymeric biomaterial surfaces were investigated on the basis of zeta potential, hydrophobicity and surface topography. A total of 10 S.epidermidis strains isolated from intravenous catheters (n= 5), endotracheal tubes (n= 3) and central venous catheters (n= 2) which were used in the patients of pulmonary Intensive Care Unit, Ege University Medical Faculty Hospital, were included to the study. Seven of those isolates were biofilm producers, inhabiting biofilm genes, 2 were non-biofilm producers, however, inhabiting biofilm genes, and 1 was non-biofilm producer, inhabiting no biofilm genes. Zeta potential analysis have been performed in 3 different buffers (phosphate-buffered saline, 1 mM potassium chloride and 1 mM potassium phosphate buffer) and at different pH values (pH 4.1-8.2), in order to simulate in vivo environment of the biomaterials. Hydrophobicities of the strains were examined by bacterial adhesion to hydrocarbon (BATH) test and the surface topography of biofilms and slime layers were visualized by atomic force microscopy (AFM) and scanning electron microscopy (SEM) methods. It was found that all strains have negative zeta potential values (surface charge) in all buffers and pH values. In hydrophobicity analysis, the highest value (86%) was determined for non-biofilm forming S.epidermidis strain YT-169b (endotracheal tube isolate) and the lowest hydrophobicity (2.5%) was determined for biofilm forming S.epidermidis strain YT-212 (central venous catheter isolate). Biofilm and slime layers of the strains were imaginated by AFM and SEM analysis in ?m scale. SEM analysis showed that bacteria highly adhered to rough surfaces on biomaterial surfaces and the produced slime layers covered the surface of bacteria. In conclusion, elucidating the surface properties of opportunistic pathogens in different physiologic buffers will give important clues for the production of non-adhesive materials and antibacterial surfaces for those bacteria. It was also estimated that designing the surface of the biomaterial to have negative surface charge in the body and to be as smooth as possible will hamper biofilm formation.Article Citation - WoS: 6Citation - Scopus: 8The Effect of Powder Preparation Method on the Artificial Photosynthesis Activities of Neodymium Doped Titania Powders(Elsevier, 2018) Yurtsever, Hüsnü Arda; Çiftçioğlu, MuhsinThe effects of nanostructure on the artificial photosynthesis activities of undoped and Nd doped titania (TiO2) powders prepared by three different chemical co-precipitation methods were investigated. Substitutional/interstitial N and S doping was observed in powders due to the presence of high concentrations of HNO3 (NP) and H2SO4 (SP) in the powder preparation media, respectively. Nd, N and S doping caused anatase/rutile phase transformation inhibition and crystallite size reduction in the nanostructure. Light absorption was significantly enhanced by Nd doping and the residual SO42-/NOx species in the nanostructure. Photocatalytic hydrogen production activity of Nd doped NP powder was 4 times greater than undoped NP powder at 700 degrees C and had a high purity (CO:H-2 ratio similar to 0.00). CO was determined to be the main product in photocatalytic CO2 reduction. NP powders had the highest CO yields and Nd doping enhanced CO production. The powders with high crystallite sizes and rutile weight fractions had the highest artificial photosynthesis activities. (C) 2018 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.Article Citation - WoS: 48Citation - Scopus: 49The Effect of Rare Earth Element Doping on the Microstructural Evolution of Sol-Gel Titania Powders(Elsevier Ltd., 2017) Yurtsever, Hüsnü Arda; Çiftçioğlu, MuhsinThe development of a better understanding of the low temperature nanophase evolution of high surface area titania (TiO2) based powders is essential for their use in photocatalytic applications. A series of rare earth (RE) element doped TiO2 powders were prepared by sol-gel processing. The effects of RE doping level, ionic size and heat treatment temperature on the nanophase structure evolution and the dopant ion location in TiO2 main matrix were investigated. Anatase was determined to be the main phase up to 900 °C at all doping levels for all REs. Anatase to rutile phase transformation was inhibited by RE doping. The inhibitory effect of REs increased with increasing ionic radius. Oxide phases of La, Nd, Pr, Sm were not present up to 5% and Nd4Ti9O24 phase was formed at 10% doping level at 800 °C. The formation of RE2Ti2O7 phases were determined for the REs with relatively lower ionic radii at 800 °C.Article Citation - WoS: 19Citation - Scopus: 17Preparation and Characterization of Nanocrystalline Titania Powders by Sonochemical Synthesis(Elsevier Ltd., 2012) Çağlar Duvarcı, Özlem; Çiftçioğlu, MuhsinNanocrystalline mesoporous titania powders were synthesized by hydrolyzing titanium isopropoxide in ethanol-water mixtures which were ultrasonically treated without using any templates or chemicals. Titanium isopropoxide-ethanol mixture was added dropwise to a water-ethanol mixture placed in an ultrasonic bath. The properties of the sonochemically synthesized powder were compared with those of the powders prepared without ultrasonic treatment along with Degussa P-25 titania powder. The phase structure, crystallite size, surface area, particle size, powder density were determined and sintering behavior was analyzed in this work. The nanotitania powder prepared during ultrasonic induced hydrolysis (TiO 2-U) was determined to be formed from a mixture of anatase and brookite phases at 25°C. The brookite phase in nanotitania powder prepared without ultrasonic treatment (TiO 2-NoU) was detected at 70°C. The anatase-rutile phase transformation was completed in the 500-700°C range for both powders. The average crystallite sizes of the powders at 25°C were determined as 10 and 5nm for TiO 2-NoU and TiO 2-U, respectively. The surface area decreased from 238 to106m 2/g for TiO 2-NoU and from 287 to 82m 2/g for TiO 2-U when the calcination temperature was increased from 200 to 500°C. The evolution of the N 2 adsorption-desorption behavior with calcination temperature and the corresponding pore size distributions/volumes was attributed to the formation of closely packed submicron aggregates during powder synthesis and calcination. The sintering behavior was concluded to be controlled by 7-10nm crystallites and the submicron aggregates. The determination of the densification behavior of titania powders prepared by different methods with various levels of dopants may prove to be very useful for a better understanding of the phase/pore structure evolution which is crucial for a significant number of applications.Article Citation - WoS: 13Citation - Scopus: 14Monetite Promoting Effect of Citric Acid on Brushite Cement Setting Kinetics(Maney Publishing, 2014) Şahin, Erdem; Çiftçioğlu, MuhsinBrushite forming calcium phosphate cements receive growing interest in hard tissue scaffold applications due to their high surface area and high bioresorbability. The finer microstructure of monetite, the dehydrated form of brushite, has attracted attention for bone tissue engineering applications. The reduction in brushite content of the b-tricalcium phosphate-monocalcium phosphate monohydrate cement system by selective inhibition of growth upon addition of citric acid to excess setting liquid was investigated. The relaxation period during cement setting was monitored by pH stat titration and free drift runs. Spectrometric analysis revealed that the change in solubility of calcium phosphates upon addition of citric acid caused the inhibition of brushite formation and promotion of monetite precipitation. Dissolution of monetite crystals was insensitive to citrate adsorption despite their lower surface area compared to brushite. Overall brushite/ monetite ratio decreased consistently with increasing citric acid concentration in the of 0?1-0?5M range.Article Citation - WoS: 6Citation - Scopus: 7Influence of Calcination Temperature on Microstructure and Surface Charge of Membrane Top Layers Composed of Zirconia Nanoparticles(Springer Verlag, 2015) Erdem, İlker; Çiftçioğlu, MuhsinThe purpose of the research is to investigate the changes in microstructure and physicochemical characteristics, mainly surface charge (i.e. zeta potential) of zirconia membrane top layer during calcination. Zirconia is one of the most commonly preferred materials for ceramic membrane top layers due to its superior durability. The physicochemical properties of the top layer composed of submicron / nano particles is necessary not only for Donnan exclusion but also for dynamics of membrane fouling. In the present research the possibility of preparation of zirconia top layers with varying surface charge with changing calcination temperature was shown and a correlation between phase transformation and surface charge was determined.Conference Object Investigation of Ha Cement Preparation and Properties by Using Central Composite Design(Trans Tech Publications, 2012) Çetin, Ali Emrah; Şimşek, Deniz; Çiftçioğlu, Muhsin; Akdeniz, Yelda; Özmıhçı, Filiz; Aykut Yetkiner, ArzuThe goal of the present work was to investigate the effects of several cement preparation parameters on setting and hardening reaction mechanisms and hydroxyapatite (HA) cement properties. A central composite experimental design (CCD) was conducted by choosing particle size, solid to liquid ratio, pH, seed concentration and buffer concentration as design parameters along with compressive strength and setting time being the responses. Tetracalcium phosphate (TTCP) powders were prepared by heat treatment of calcium and phosphate source mixtures in the 1200-1400°C temperature range followed by quenching to room temperature in a dessicator. The second phase used in the formulations (brushite) was prepared by aqueous chemical methods. A series of HA pastes/cements were prepared by changing the above mentioned design parameters. Cements were characterized by a standardized setting time test, mechanical testing machine, SEM and XRD. HA cements with the desired properties can be formulated by using CCD in which the responses were expressed by a second order polynomial equation of the parameters. Compressive strengths for the majority of HA cements were determined to be in the 100-160 MPa range which is significantly higher than those reported in the literature. © (2012) Trans Tech Publications.Article Citation - WoS: 15Citation - Scopus: 17Preparation of Particulate/Polymeric Sol-Gel Derived Microporous Silica Membranes and Determination of Their Gas Permeation Properties(Elsevier Ltd., 2010) Topuz, Berna; Çiftçioğlu, MuhsinMonodisperse silica sols with well-defined spherical particles ranging in size from 5 to 310 nm were prepared through Stober process. Both particulate and polymeric sol-gel routes were employed for the preparation of stable silica sols. The use of polymeric species in combination with particulate silica spheres may allow the design of predefined membrane pore structures with high thermal stability by cubic/random/close packing of monodisperse spherical particles incorporated into the polymeric network. The size and volume content of spheres were varied in order to modify the consolidation behaviour of 2-structural silica membranes which would enhance the thermal stability. The low shrinkage level for sphere loaded 2-structural systems compared to the pure polymeric counterparts might be explained by the decrease in the structural free energy of the polymeric/particulate 2-structural system. The thermal stability of the microporous membranes may thus be improved by incorporating particulates into the polymeric network through the formation of a lower extent of thermally induced microcrack formation. The N2 permeation through 90 nm silica sphere added silica membranes remained constant when they were heat treated in the 250-400 °C range indicating the stability of the pore network. © 2009 Elsevier B.V. All rights reserved.Article Citation - WoS: 17Citation - Scopus: 19Effect of Compaction Pressure on Structural and Superconducting Properties of Bi-2223 Superconductors(Springer Verlag, 2010) Kocabaş, Kemal; Gökçe, Melis; Çiftçioğlu, Muhsin; Bilgili, ÖzlemIn this work, effects of compaction pressure on the structural and superconducting properties of BSCCO ceramic superconductors were investigated. The study was carried out on two systems which were, System I: Bi 1.7Pb 0.3Sr 2Ca 2Cu 3O y and System II: Bi 1.6Pb 0.3Ag 0.1Sr 2Ca 2Cu 3O y, respectively. Ceramic powders were prepared by conventional solid-state reaction method and sintered at 850°C after compaction at five different pressures in the 150-750 MPa range. Critical temperatures of samples were determined by resistivity-temperature determinations made by four-point probe method in liquid nitrogen conditions. XRD analysis was conducted by powder X-ray diffraction method. Morphology of the grains present in the samples were determined by using scanning electron microscope (SEM) photographs at 2 K× and 2.5 K× magnifications for System I and System II, respectively. Sintered densities of the superconducting ceramics were measured by Archimedes water displacement method and unit cell parameters were additionally obtained from XRD data. T c values for System I was determined to be in the 109-115 K with sample D having the highest T c of 115 K while T c varied in the 104-109 K range and sample B had the highest T c value of 109 K for System II. The transition width, which is a sign of the purity of the samples, was determined to be narrow for both systems. The data obtained from X-ray diffraction measurements have shown that 2223 high-T c phase was dominant in both systems. The determination of the optimum pellet compaction pressure for BSCCO ceramic superconductors was the main purpose of this work. The results of this work indicated that compaction at around 450 MPa improves the superconducting and structural properties of the BSCCO ceramic superconductors. © 2009 Springer Science+Business Media, LLC.
- «
- 1 (current)
- 2
- 3
- »