Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
450 results
Filters
Settings
Search Results
Conference Object Citation - WoS: 24Effect of pH and Hydration on the Normal and Lateral Interaction Forces Between Alumina Surfaces(2006) Polat, Mehmet; Sato, Kimiyasu; Nagaoka, Takaaki; Watari, KojiNormal and lateral interaction forces between alumina surfaces were measured using Atomic Force Microscopy-Colloid Probe Method at different pH. The normal force curves exhibit a well-defined repulsive barrier and an attractive minimum at acidic pH and the DLVO theory shows excellent agreement with the data. The normal forces are always repulsive at basic pH and the theory fails to represent the measurements. Lateral forces are almost an order of magnitude smaller in the basic solutions. These differences, which have important implications in the study of stability and rheology, are attributed to the hydration of the alumina surface at basic pH. © 2013 Elsevier B.V., All rights reserved.Book Part A Study on Absorption and Reflection of Infrared Light by the Uncoated and Al Coated Surfaces of Polymer Films Techniques(Apple Academic Press, 2014) Arkış, Esen; Balköse, DevrimPolymer films coated with a thin layer of aluminum or aluminum oxide are extensively used in food packing as heat shields. The infrared rays were not transmitted through the films and were reflected protecting the contents from the harmful effects of infrared light. The quantitative measurement of the film thickness and infrared light reflection and absorption capacities of aluminum coated films used as packing materials were possible using infrared spectroscopy. © 2015 by Apple Academic Press, Inc.Book Part Calcium Soap Lubricants(CRC Press, 2015) İzer, Alaz; Kahyaoğlu, Tuğçe Nefise; Balköse, DevrimThe reparation and characterization of calcium stearate (CaSt2) and a lubricant by using calcium stearate were aimed at in this study. Calcium stearate powder was prepared from sodium stearate and calcium chloride by precipitation from aqueous solutions. CaSt2 and the Light Neutral Base oil were mixed together to obtain lubricating oil. It was found that CaSt2 had a melting temperature of 142.8 °C and in base oil it had a lower melting point, above 128 °C. It was dispersed as lamellar micelles as the optical micrographs had shown. From rate of settling the size of dispersed particles were found to be 1.88 µm and 0.11 µm for lubricants having 1% and 2% CaSt2, respectively. The friction coefficient and wear scar diameter of base oil 0.099 and 1402 nm were reduced to 0.0730 and 627.61 nm respectively for the lubricant having 1% CaSt2. Lower wear scar diameter (540 nm) was obtained for lubricant with 2% CaSt2. CaSt2 improved the lubricating property of the base oil but did not improve its oxidative and thermal stability. © 2015 by Apple Academic Press, Inc.Article Citation - WoS: 10Citation - Scopus: 9Bi̇yomalzemelerden İ̇zole Edi̇len Staphylococcus Epidermidis Suşlarinin Yüzey Özelli̇kleri̇ni̇n Beli̇rlenmesi̇(Ankara Mikrobiyoloji Derneği, 2010) Sudağıdan, Mert; Erdem, İlker; Çavuşoğlu, Cengiz; Çiftçioğlu, MuhsinThe surface properties of bacteria play an important role on adhesion to the biomaterial surface. In this study, the surface properties of Staphylococcus epidermidis strains isolated from clinically used polymeric biomaterial surfaces were investigated on the basis of zeta potential, hydrophobicity and surface topography. A total of 10 S.epidermidis strains isolated from intravenous catheters (n= 5), endotracheal tubes (n= 3) and central venous catheters (n= 2) which were used in the patients of pulmonary Intensive Care Unit, Ege University Medical Faculty Hospital, were included to the study. Seven of those isolates were biofilm producers, inhabiting biofilm genes, 2 were non-biofilm producers, however, inhabiting biofilm genes, and 1 was non-biofilm producer, inhabiting no biofilm genes. Zeta potential analysis have been performed in 3 different buffers (phosphate-buffered saline, 1 mM potassium chloride and 1 mM potassium phosphate buffer) and at different pH values (pH 4.1-8.2), in order to simulate in vivo environment of the biomaterials. Hydrophobicities of the strains were examined by bacterial adhesion to hydrocarbon (BATH) test and the surface topography of biofilms and slime layers were visualized by atomic force microscopy (AFM) and scanning electron microscopy (SEM) methods. It was found that all strains have negative zeta potential values (surface charge) in all buffers and pH values. In hydrophobicity analysis, the highest value (86%) was determined for non-biofilm forming S.epidermidis strain YT-169b (endotracheal tube isolate) and the lowest hydrophobicity (2.5%) was determined for biofilm forming S.epidermidis strain YT-212 (central venous catheter isolate). Biofilm and slime layers of the strains were imaginated by AFM and SEM analysis in ?m scale. SEM analysis showed that bacteria highly adhered to rough surfaces on biomaterial surfaces and the produced slime layers covered the surface of bacteria. In conclusion, elucidating the surface properties of opportunistic pathogens in different physiologic buffers will give important clues for the production of non-adhesive materials and antibacterial surfaces for those bacteria. It was also estimated that designing the surface of the biomaterial to have negative surface charge in the body and to be as smooth as possible will hamper biofilm formation.Article Citation - Scopus: 1Visualization of Equilibrium Fcc Catalyst Surface by Afm and Semeds(American Chemical Society, 2003) Bayraktar, Oğuz; Erdoğan, Gani; Kugler, Edwin L.[No abstract available]Article Citation - WoS: 8Citation - Scopus: 9Polymeric Thermal Analysis of C+h and C+h+ar Ion Implanted Uhmwpe Samples(Elsevier Ltd., 2007) Kaya, N.; Öztarhan, Ahmet M.; Urkaç, Emel Sokullu; Ila, D.; Budak, S.; Oks, E.; Tıhmınlıoğlu, Funda; Muntele, C.Chemical surface characterization of C + H hybrid ion implanted UHMWPE samples were carried out using DSC (differential scanning calorimeter) and TGA (thermal gravimetric analysis) techniques. Samples were implanted with a fluence of 10(17) ion/cm(2) and an extraction voltage of 30 kV. The study of TGA and DSC curves showed that: (1) Polymeric decomposition temperature increased, (2) T-m, Delta C-p and Delta H-m values changed while Delta C-p and Delta H-m increased. T-g value could not be measured, because of some experimental limitations. However, the increase in Delta H-m values showed that T-g values increased, (3) the branch density which indicated the increase in number of cross-link (M-c) decreased in ion implanted samples and (4) increase in Delta H-m values indicated increase in crystallinity of implanted surface of UHMWPE samples.Conference Object Hidrofobik İlaç Taşıyıcısı Olarak Akrilik Yıldız Blok Kopolimerler(Institute of Electrical and Electronics Engineers Inc., 2009) Genç, Gözde; Batıgün, Ayşegül; Bayraktar, Oğuz; Altıntaş, Özcan; Tunca, Ümit; Hizal, GürkanAmphiphilic poly(methyl methacrylate)-b-poly(acrylic acid) (PMMA-b-PAA) copolymers with 4 and 6 arms were synthesized by Atomic Transfer Radical Polymerization (ATRP). The polymers were characterized by GPC, H-NMR and FTIR analysis. Polymer samples synthesized at various molecular weights between 18-80 kDa were investigated in terms of maximum loading capacity and critical micelle concentration by fluorescence spectroscopy. 4 arm PMMA-b-PAA (MW 30 kDa) was loaded with hydrophobic model drug indomethacin with an extremely high drug loading efficiency (22.5% drug content). Drug loaded polymer formed a stable and biodegradable complex in aqueous medium.Conference Object Structural and Thermal Characterization of Ti+o Ion Implanted Ultrahigh Molecular Weight Polyethylene (uhmwpe)(American Institute of Physics, 2009) Öztarhan, Ahmet; Urkaç Sokullu, Şadiye Emel; Tıhmınlıoğlu, Funda; Kaya, N.; Ila, Daryush; Budak, S.; Nikolaev, A.In this work, Metal-Gas Hybrid Ion Implantation technique was used as a tool for the surface modification of Ultra High Molecular Weight Polyethylene (UHMWPE). Samples were Ti + O ion implanted by using Metal-Vapour Vacuum Arc (MEVVA) ion implanter to a fluence of 5x10(16) ion/cm(2) for each species and extraction voltage of 30 kV. Untreated and surface treated samples were investigated by Rutherford Back Scattering (RBS) Spectrometry, Attenuated Total Reflectance - Fourier Transform Infrared (ATR-FTIR) Spectroscopy, Thermo Gravimetric Analysis (TGA) and Differential Scanning Calorimetry (DSC). Results indicate that Ti + O ion implantation can be applied on UHMWPE surfaces successfully. ATR-FTIR spectra indicate that the C-H concentration on the surface decreased after Ti + O implantation. Thermal characterization with TGA and DSC shows that polymeric decomposition temperature is shifted after ion implantation.Conference Object Development of Functional Materials for Sirna Delivery and Neural Tissue Engineering(AIChE, 2015) Uz, Metin; Alsoy Altınkaya, Sacide; Mallapragada, Surya K.The current nonviral siRNA delivery systems in the literature face many problems such as, cellular entry, endosomal escape and efficient siRNA release. Considering this motive, we developed gold nanoparticles (AuNPs) and temperature/pH responsive pentablock copolymer based siRNA delivery systems to address these problems. The temperature and pH responsive cationic and amphiphilic pentablock copolymers, which were consisted of the temperature responsive Pluronic F127 middle block constructed by PEO-PPO-PEO ((poly(ethyleneoxide)-block-poly(propyleneoxide)-block-poly(ethyleneoxide))) blocks contributing cellular entry through temperature responsive micellization and pH responsive cationic PDEAEM (poly(2-diethylaminoethyl methacrylate)) end blocks facilitating nucleic acid condensation and endosomal escape, were used for the first time in the development of polyplex and AuNP based multicomponent siRNA delivery systems (MCSs). The results indicated that systems managed to protect siRNA from external effects, maintain the system stability, facilitate cellular entry and enhance endosomal escape. It was noted that the transfection efficiency of the MCSs, which were boosted by the presence of cleavable disulfide bond, was ~15% higher than the commercial product RNAiMax while the efficacy of polyplexes alone were similar to the RNAiMax.Conference Object Solution of the Non-Linear Poisson Boltzmann Theory for the General Case of Dissimilar Double Layers(2006) Polat, MehmetCalculation of the surface potentials, surface charges or electrostatic pressure for interacting colloidal particles is exceedingly important in mineral processing, environmental engineering, ceramic sciences, etc. Such calculations require solving the non-linear Poisson-Boltzmann theory at each plate separation. Though approximate analytical solutions of this theory are available for simplified cases, a general, but compact analytical solution is yet to be developed. A solution with no restrictions on surface potentials or charges is developed in this paper. The expressions developed are straightforward and require as input only the surface potentials at infinite separations.