Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
205 results
Filters
Settings
Search Results
Conference Object Antioxidant, Antimicrobial and Cytotoxic Activities of Some Turkish Plant Extracts(John Wiley and Sons Inc., 2006) Altıok, Evren; Asbagh, L. Abbasi; Bulut, Çisem; Ülkü, Semra; Bayraktar, OğuzPlant extracts have been known to possess notable biological activity, including antioxidant, antimicrobial and cytotoxic properties. There is a growing interest in the use of natural products in the human food industries as consumer resistance to synthetic additives increases. These products can be used to improve human health. In vitro antioxidant, antimicrobial and cytotoxic activities of ethanol extracts of some plants from Urla region in Turkey were investigated. Plant materials were collected from Pistacia lentiscus, Vitex agnus-castus, Cistus creticus and Nerium oleander in October, November and December.Conference Object Citation - WoS: 2Incorporation of Equisetum Arvense Extract Into Silk Fibroin-Hyaluronic Acid Sponge Matrices for Wound Dressing Applications(Elsevier, 2012) Uslu, Mehmet Emin; Erdoğan, İpek; Bayraktar, OğuzEquisetum arvense extract has frequently been investigated for its antioxidant capacity, antimicrobial and antitumor properties. However, one of the challenges in natural compound investi-gations is to maintain the stability of polyphenolic compounds during their storage and applications. For this purpose extracts can be incorporated into different forms of biomaterial. In this research silk fibroin (SF) and hyaluronic acid (HA) was used as sponge matri-ces for wound dressing application.Conference Object In Vitro Antitumor Activity of Sarcopoterium Spinosum Leaf Extract With Bioactive Natural Compounds(Elsevier, 2013) Süngüç, Ceren; Erdoğan, İpek; Uslu, Mehmet Emin; Bayraktar, OğuzCancer cell lines cause generation of reactive oxygen species and free radicals at high levels (Wang and Yi, 2008). Then generated free radicals lead to breakdown of the structure of DNA, lipid or protein (Gul et al., 2011). When plant extracts including antioxidant phytochemicals are exposed to the redox reactions, the harmful effects of free radicals are effectively prevented. The aim of present research was to evaluate the antitumor potential of the extract derived from Sarcopoterium spinosum leaves. The leaves of S. spinosum were collected in Izmir, Turkey. Total phenol content of ethanolic.Conference Object Investigation of Anti-Tumoral Activity of Cistus Creticus Extract Against Pc-3 Cell Line(Elsevier, 2013) Erdoğan, İpek; Süngüç, Ceren; Uslu, Mehmet Emin; Bayraktar, OğuzRecent studies have revealed that plant extracts show cytotoxic activities against cancer cell lines by ceasing cell division in particular phases (Xu et al., 2012, Yıldırım et al., 2013). Expression of specific genes was found to be activated according to pathway in which cell death occurs. Objective of this study was to identify antitumoural effect of Cistus creticus, which is a perennial shrub, found in Mediterranean region, against prostate cancer cell line by measuring the cytotoxic activities and apoptotic gene expression levels.Conference Object Investigation of Antimicrobial Activity To Determine Mic Value of Cinnamon Bark Oil Against Helicobacter Pylori(Wiley, 2014) Güneş, Seda; Becerikli, T.; Tıhmınlıoğlu, Funda; Yılmaz, Özlem[No abstract available]Article Citation - WoS: 54Citation - Scopus: 64Bioactive Fish Scale Incorporated Chitosan Biocomposite Scaffolds for Bone Tissue Engineering(Elsevier Ltd., 2019) Kara, Aylin; Tamburacı, Sedef; Tıhmınlıoğlu, Funda; Havıtçıoğlu, HasanRecently, biologically active natural macromolecules have come into prominence to be used as potential materials in scaffold design due to their unique characteristics which can mimic the human tissue structure with their physical and chemical similarity. Among them, fish scale (FS) is a biologically active material with its structural similarity to bone tissue due to including type I collagen and hydroxyapatite and also have distinctive collagen arrangement. In the present study, it is aimed to design a novel composite scaffold with FS incorporation into chitosan (CH) matrix for bone tissue regeneration. Therefore, two biological macromolecules, fish scale and chitosan, were combined to produce bio-composite scaffold. First, FS were decellularized with the chemical method and disrupted physically as microparticles (100 in), followed by dispersal in CH with ultrasonic homogenisation, CH/FS scaffolds were fabricated by lyophilization technique. Scaffolds were characterized physically, chemically, mechanically, and morphologically. SEM and porosity results showed that CH/FS scaffolds have uniform pore structure showing high porosity. Mechanical properties and degradation rate are enhanced with increasing FS content. In vitro cytotoxicity, proliferation and osteogenic activity of the scaffolds were evaluated with SaOS-2 cell line. CH/FS scaffolds did not show any cytotoxicity effect and the cells were gradually proliferated during culture period. Cell viability results showed that, FS microparticles had a proliferative effect on SaOS-2 cells when compared to control group. ALP activity and biomineralization studies indicated that FS micro particle reinforcement increased osteogenic activity during culture period. As a biological macromolecule with unique characteristics, FS was found as cytocompatible and provided promising effects as reinforcement agents for polymeric scaffolds. In conclusion, fabricated CH/FS bio-composites showed potential for bone tissue engineering applications. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 20Citation - Scopus: 21Long Term Stability of Biodegradable Polymers on Building Limestone(Elsevier Ltd., 2019) Kaplan, Zişan; Böke, Hasan; Sofuoğlu, Aysun; İpekoğlu, BaşakSynthetic polymers can be replaced by biodegradable ones as adhesives, water repellents and consolidants on the stone surfaces and facades of the historic buildings in their conservation to minimize future deterioration. In this study, the long-term stability of two biodegradable polymers, polyhydroxybutyrate (PHB) and poly-L-lactide (PLA), and an acrylic polymer (Paraloid B72) which is commonly used in conservation works of artefacts, were evaluated on limestone using a UV lamp-weathering chamber (up to 104 days) for future protection studies. Chemical and morphological changes induced by an accelerated weathering test were examined by Fourier Transform Infrared spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM) analyses. Protection efficiency of the polymers was determined by the changes in color, capillary water absorption, static contact angle on limestone. Paraloid B72, PHB, and PLA coatings significantly increased hydrophobicity while decreasing capillarity water absorption and caused negligible change in the color of the limestone. Protection efficiencies of PLA and PHB polymers were almost the same as that of Paraloid B72, a widely used acrylic polymer. However, PLA and PHB seemed to be favorable polymers as protective agents due to their reversibility and biodegradability, low chromatic changes, good hydrophobic behavior and good stability to weathering in reducing the effects of outdoor exposure on limestone surfaces.Article Citation - WoS: 31Citation - Scopus: 38Liquefaction of Waste Hazelnut Shell by Using Sub- and Supercritical Solvents as a Reaction Medium(Elsevier, 2019) Demirkaya, Emre; Dal, Orkan; Yüksel, AslıDirect thermochemical biomass degradation to obtain bio-oil by using organic solvents is not a new process type, and it has some advantages over hydrothermal liquefaction technique. However, up to our best knowledge, in this study, hazelnut shell decomposition by using ethanol, acetone and their mixtures at sub/supercritical conditions was studied for the first time in literature. Experiments were carried out between 220-300 degrees C, at three different reaction times (30, 60 and 90 min) for five different solvent ratios. Highest solid conversion achieved at 300 degrees C by using pure ethanol was 64.2%, whereas highest bio-oil yield was found as 44.2% at 300 degrees C with 50/50 (EtOH/Ac: v/v). Ethanol and acetone showed different characteristics during the reactions and their effects on the conversion and bio-oil yield were discussed. Statistical analysis showed that time, temperature, ratio and synergy between temperature-time were affecting parameters for the conversion and bio-oil yield. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 28Citation - Scopus: 29Development of a High-Flux Thin-Film Composite Nanofiltration Membrane With Sub-Nanometer Selectivity Using a Ph and Temperature-Responsive Pentablock Co-Polymer(American Chemical Society, 2019) Bar, Canbike; Çağlar, Nagahan; Uz, Metin; Mallapragada, Surya K.; Alsoy Altınkaya, SacideProducing block co-polymer-based nanofiltration (NF) membranes with sharp molecular weight cutoffs via an efficient method exhibiting persistent size-based separation quality is challenging. In this study, this challenge was addressed by reporting a facile approach to fabricate pentablock co-polymer (PBC)-based thin-film composite (TFC) NF membranes. The PBC, consisting of temperature-responsive Pluronic F127 (PEO-b-PPO-b-PEO) middle blocks and pH-responsive poly(N,N-(diethylamino)ethyl methacrylate) end blocks, were synthesized by atom-transfer radical polymerization. This polymer was then attached electrostatically to the surface of polysulfone/sulfonated polyether-sulfone support membranes fabricated using a non-solvent-induced phase separation technique. The conformational changes of the PBC chains in response to pH and temperature determined the, pure water flux and neutral solute (PEG 1000) rejection performance of TFC membranes. Permeability of the membranes increased from 13.0 +/- 0.63 to 15.9 +/- 0.06 L/m(2).h bar and from 6.7 +/- 0.00 to 13.9 +/- 0.07 L/m(2).h.bar by changing the solution pH from 4 to 8.5 and temperature from 4 to 25 degrees C, respectively. The pH- and temperature-responsive conformational changes did not affect the PEG 1000 rejection and membrane pore radius, which remained constant at similar to 89% and similar to 0.9 nm, respectively. This important finding was attributed to the high grafting density of co-polymer chains, resulting in spatial limitations among the grafted chains. The pore size of similar to 0.9 nm achieved with the proposed membrane design is the smallest size reported so far for membranes fabricated from block copolymers. TFC membranes demonstrated high stability and maintained their flux and rejection values under both static (storage in an acidic solution for up to 1 month) and dynamic (filtering PEG 1000 solution over 1 week) conditions. Pentablock copolymers enable a NF membrane with a sharp molecular weight cutoff suitable for size-selective separations. The membrane fabrication technique proposed in this study is a scalable and promising alternative that does not involve complex synthetic routes.Article Citation - WoS: 22Citation - Scopus: 25Novel Hybrid Treatments of Textile Wastewater by Membrane Oxidation Reactor: Performance Investigations, Optimizations and Efficiency Comparisons(Elsevier, 2019) Aydıner, Coşkun; Mert, Berna Kiril; Doğan, Esra Can; Yatmaz, Hüseyin Cengiz; Dağlı, Sönmez; Aksu, Şeyda; Gören, Ayşegül Yağmur; Balcı, EsinFeasible reclamation of industrial wastewaters by consuming less resource and time requires researchers to develop advanced and sophisticated solutions to meet today's versatile needs. In this respect, novel technological applications of hybrid membrane oxidation reactor (MOR) comprising of the Fenton or photo-Fenton enhanced ultrafiltration (FEUF and pFEUF), was demonstrated for treating textile washing wastewater. Their comparative hybrid performances were explored based on response surface analyses of Taguchi experimental designs that were optimized for maximized responses at minimum oxidant and acid consumptions. From eleven specific variables, those affecting the hybrid treatment performances at significant levels were found as H2O2 amount, process time, membrane type, Fe2+ concentration and temperature. The pFEUF treatment showed better and faster organics removal efficiency than by FEUF, and the UF process was seen to be more affected from changing operational conditions in pFEUF. Organic pollutants were oxidized by 56.6 +/- 8.7% degradation and 31.5 +/- 3.2% mineralization, while UF allowed a synergistic contribution to the hybrid MOR performance by 38.1 +/- 4.7% and 17.3 +/- 3.1%, respectively. Compared to simultaneous MOR and external UF after Fenton, sequential MOR was found as the best solution by an efficiency of 84.5% COD, 70.5% TOC, and 155.6 L/m(2).h. The effluents could be readily produced with quality suitable for directly discharging to the sewage infrastructure system resulting in a complete treatment. This study proved that the developed MOR techniques are technologically favorable for the treatment of industrial organic wastewaters due to high treatment performances and less resource, time and land needs. It can be finally declared that they can be used as rather attractive solutions for not only wastewater reclamation but also water recovery by further handling of their effluents. (C) 2019 Elsevier B.V. All rights reserved.