Chemical Engineering / Kimya Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/14

Browse

Filters

2000 - 2009132010 - 201942020 - 20235

Settings

Start date: 1996Department: search.filters.department.İzmir Institute of Technology. Chemistry

Search Results

Now showing 1 - 10 of 22
  • Article
    Citation - WoS: 2
    Citation - Scopus: 3
    A Phenomenological Kinetic Flotation Model: Distinct Time-Variant Floatability Distributions for the Pulp and Froth Materials
    (Elsevier, 2023) Polat, Mehmet; Polat, Hürriyet
    A simple and easy-to-use phenomenological kinetic flotation model, strongly connected with the physics of the process, is proposed in this paper. The model explicitly contains the cell volume, aeration rate, volumetric holdup, mean bubble size, and particle density as input variables. It can be employed to characterize the floatability distributions of the particles in the pulp and the froth separately any time during the flotation process. Two new time-dependent kinetic parameters, the bubble loading factor & phi;(t) and the maximum cell mass transfer capacity Mmax(t) also appear in the model expression. & phi;(t) is a measure of the degree of crowding of the bubble surfaces and accounts for the deviations from the first-order rate equation. Mmax(t) describes the maximum amount of mass that can be transported to the froth phase by the bubble population in the cell. Screen fractionation of each froth product collected at different time intervals during a single kinetic flotation test is sufficient to generate the data required by the model for analysis. Application of the model to this data yields directly time-dependent functions for the floatability of the particles reporting to froth Kf(t) or remaining in the cell Kp(t) for each size fraction separately, without the need for any empirical parameters. The test of the model was carried out using published kinetic flotation data from the literature.
  • Book Part
    Citation - Scopus: 3
    Tissue Engineering Applications of Marine-Based Materials
    (Springer, 2022) Polat, Hürriyet; Zeybek, Nuket; Polat, Mehmet
    Tissue engineering is a promising approach in replacing or improving tissues lost or has become nonviable due to disease or trauma by the use of scaffold materials by combining engineering and biochemical/physicochemical methods. Its purpose is to create suitable matrices that support cell differentiation and proliferation toward the formation of new and functional tissue. Marine-based natural compounds are potential scaffold feedstock material in tissue engineering owing to their biocompatibility and biodegradability while providing excellent biochemical/physicochemical properties. Numerous application areas and various fabrication routes techniques described in the literature attest to the importance of these materials in tissue regeneration. This review has been carried to merge the information from a large number of studies on the marine-based scaffold materials in tissue engineering into a coherent summary. © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2022.
  • Research Project
    Uçucu kül ve doğal zeolitin beraber kullanılarak borun atık sulardan uzaklaştırılması
    (2008) Polat, Hürriyet; Polat, Mehmet; Şekeroğlu, Koray
    Bu proje kapsamında, Yeniköy, Kemerköy, Soma ve Yatağan termik santrallerinden alınan uçucu küllerin, sıcaklık, katı / sıvı oranı ve başlangıç konsantrasyonu gibi parametler kullanılarak bor adsorpsiyon kapasiteleri incelenmiştir. Bor adsorpsiyon deneyleri laboratuvarda hazırlanan simültane sular (10, 25, 50, 100 ve 300 ppm Bor) ve Kızıldere (Denizli) jeotermal tesislerinden (25-30 ppm Bor) alınan borlu sularla yapılmıştır. Yapılan “batch” deneylere dayanarak, uçucu küllerin boru adsopladığı ve özellikle yüzey alanı en geniş olan Yeniköy külü yeterli zaman ve yüzey alanı sağlandığında %99 ‘a varan adsorpsiyon miktarına ulaştığı gözlenmiştir. Tüm küllerin deney sonuçları tek katmanlı adsorpsiyonu belirten “Langmuir” izotermine ve Kaydırılmış İkinci Mertebe parametresine daha uygun olduğu tespit edilmiştir. Yapılan sıcaklık çalışmalarında, Yeniköy ve Kemerköy külleriyle 25o C, 45o C ve 65o C koşullarında yapılan deneylerin verileri kullanılarak, o ΔH ,o ΔG , o ΔS değerleri hesaplanmıştır. Sıcaklıkla azalan adsorpsiyon kapasitesi ve negatif o ΔH değerleri, ekzotermik adsorpsiyon olduğunu belirtmektedir. Aynı zamanda -40,0 kJ / mol’ün altında çıkan (-52,89 ve -48,55 kJ / mol) entalpi ( o ΔH ) değerleri kimyasal adsorpsiyon olduğunu belirtmektedir. Soma ve Yatağan külleri için de Langmuir izotermlerinin uygun olması kimyasal bir adsorpsiyon olduğunu önermektedir.
  • Article
    Citation - WoS: 8
    Citation - Scopus: 11
    The Effect of Protein Bsa on the Stability of Lipophilic Drug (docetaxel)-Loaded Polymeric Micelles
    (Elsevier, 2021) Polat, Hürriyet; Çevik Eren, Merve; Polat, Mehmet
    Polymeric micelles are promising delivery vehicles for improving the efficacy of anticancer drugs and reducing their side effects. However, considering the binding ability of serum albumin, the possible interaction of micelles with the native plasma components in the bloodstream raises serious questions on micellar stability. The stability of barren or drug-loaded copolymeric micelles was investigated systematically in distilled water (DW) and simulated body fluid (SBF) solutions in the presence of a model protein. The copolymer was a Pluronic® series triblock copolymer (P-123), the drug was strongly lipophilic docetaxel (DOC) and the protein was Bovine Serum Albumin (BSA). The effect of such factors as BSA and DOC concentrations and the aging of the micellar solutions was studied. Both the barren and drug-loaded micelles were quite stable in blank DW and SBF solutions for long times up to 10 days. They lost integrity and showed no inclination to re-assemble when the BSA concentration reached a critical value, which was very close to the plasma Human Serum Albumin (HSA) concentration. The presence of DOC in the micellar cores could not prevent disintegration. The results illustrate clearly that ensuring the stability of polymeric micelles in blood plasma should be an important design factor in their use as drug carriers.
  • Article
    Solunabilir Tozun Su Spreyleri Kullanılarak Bastırılmasında Son Gelişmeler
    (2000) Polat, Hürriyet; Polat, Mehmet; Gürgen, Sabit
    Türkiye'de görülen meslek hastalıklarının çoğunu tozun solunmasından kaynaklanan pnömokonyoz oluşturmaktadır. Bu yazının amacı, yeraltı ocaklarında işçi sağlığı açısından sakıncalı olan havada asılı tozların, su spreyleri kullanılarak bastırılması konusunda gelinen aşamayı sunmaktır. Bu amaçla, havada asılı toz ve su damlalarıyla yapılan detaylı çalışmalar ışığında, sprey suyuna katılan yüzey aktif maddelerin istenen verim artışını sağlayamama nedenleri ele alınmakta ve su spreylerinin Türkiye'deki maden ocaklarında kullanım olanakları tartışılmaktadır.
  • Conference Object
    Effect of Some Physical, and Chemical Variables on Flocculation and Sediment Behaviour
    (A.A. Balkema Publishers, 2000) Polat, Hürriyet; Polat, Mehmet; İpekoğlu, Üner
    Effect of some chemical and physical variables on the settling rate, final sediment height, sediment viscosity and supernatant turbidity of a clay sample was studied using various polyacrylamide type flocculants. Increasing flocculant concentration significantly increased both the settling rate and sediment viscosity. More importantly, changes in the final sediment, height, hence the packing density, was minimal for all the conditions tested once the sediment was allowed to consolidate. Also, the mode of addition of the polymer, at once or continuous, did not seem to affect any of the parameters measured. Conditioning time seemed to alter the settling rate at low polymer concentrations, but had no effect at high polymer concentrations. However, increasing the conditioning time caused a decrease in the sediment viscosity. Different types of the polyacrylimides generated different settling rates at a given concentration, but the final sediment height was nearly independent of polymer type.
  • Book Part
    Citation - Scopus: 6
    Recent Advances in Chitosan-Based Systems for Delivery of Anticancer Drugs
    (Springer, 2020) Polat, Mehmet; Polat, Hürriyet
    Problems in transporting drug molecules to tumor sites in required dose or constitution lead to low efficacy and significant side effects. Shielding the drug molecules in micelles, liposomes, or nanoparticles is a major line of investigation to improve chemotherapeutic treatment. Though compatibility for proper envelopment of the drug and timely release at the tumor site are required of such a carrier, protecting its own physicochemical and morphological integrity during transport is another precondition. Because of its superior polymerization capability, biocompatibility, pH dependence, and charging characteristics, chitosan has been in the forefront of potential drug carriers. Numerous synthesis routes for chitosan-based nanocarriers have been suggested to the extent that a search of the literature published since 2000 with the keywords “novel + nano + chitosan” in the title results in 527 articles, indicating the bewildering quality and quantity of the new information. This review was carried out not only to peruse this large amount of work on chitosan-based anticancer drug delivery but also to extract manageable patterns from numerous synthesis routes. The main conclusion is that the synthesis methods suggested in literature can be combined into two main routes, and the degree of hydrophobicity of the drug determines which route should be followed. © Springer Nature Singapore Pte Ltd. 2019.
  • Article
    Citation - WoS: 13
    Citation - Scopus: 15
    Analysis of Dilution Induced Disintegration of Micellar Drug Carriers in the Presence of Inter and Intra Micellar Species
    (Elsevier, 2020) Polat, Hürriyet; Kutluay, Gülistan; Polat, Mehmet
    Micelles of self-assembling polymeric surfactant molecules are promising nanoscopic carriers for lipophilic and toxic drugs, genes, and imaging molecules. Though it is a must for successful transport, ensuring micelle integrity is a challenge during intravenous injection where micelles must endure abrupt dilutional effects and encounters with native molecules. Therefore, direct observational evidence of how micelles behave during dilution is valuable in manipulating the designs of these carriers for a succesful drug delivery. Morphology and stability of the barren and a drug-loaded (lipophilic probucol) micelles of a polymeric surfactant (Pluronic® P123) were monitored during systematic re-dilution in distilled water and simulated body fluid in the presence of a model protein (bovine serum albumin). It was observed through surface tension, dynamic light scattering, laser velocimetry, transmission scanning and transmission electron microscopy, and atomic force microscopy analyses that the micelles disintegrated to various degrees in all cases upon dilution. The results indicate that dilution effects must be taken into account in designing micellar drug carriers. The assistance of some other means of protection such as encapsulation should be considered for ensuring micelle integrity within the bloodstream. © 2020 Elsevier B.V.
  • Conference Object
    Citation - Scopus: 1
    Yapay Sindirim Sıvısında Doğal Zeolitlerde Meydana Gelen Morfolojik Değişmeler
    (Institute of Electrical and Electronics Engineers Inc., 2009) Demirbüker Kavak, Dilek; Özçelik, Serdar; Ülkü, Semra
    Doğal zeolitler biyoaktif maddelerdir. Doğal zeolitlerin hayvanlarda biyokütle arttırıcı besi katkı maddesi, insanlarda ülser tedavisinde mide asitliğini tamponlayıcı, asitliği düşürücü ilaç gibi değişik kullanım alanları mevcuttur. Değişik sağlık alanlarında kullanımlarından dolayı, zeolitlerin yapısal stabilitesinin sindirim sırasında belirlenmesi; olası olumlu veya olumsuz etkileşimleri anlamak açısından önem taşımaktadır. Gerçekleştirilen araştırmada, yapay sindirim sırasında zeolitte meydana gelebilecek olası morfolojik değişimlerin incelenmesi hedeflenmiştir. Bu amaçla zeolitin ABTS ile radikal sönümleme kapasitesi araştırılmış, yapay sindirim denemeleri gerçekleştirilerek de uygulama süreci sonrası yapıda olası değişimler ve adsorpsiyonlar taramalı elektron mikroskobu, FTIR, XRD analizleri ile incelenmiştir. 3g/100ml zeolitin ABTS radikalini %45 inhibe ettiği bulunmuştur. Taramalı elektron mikroskobu deneyleri sonucunda yapay sindirilmiş örneklerin yüzey morfolojisinde değişim gözlenmemiştir. Element analizleri yapısal kaybın olmadığını, Al ve Si elementlerinin ağırlıkça yüzdelerinin, kontrol örnekleriyle (Al:8.1; Si: 39) sindirilmiş örneklerde (Al:8.2; Si: 38.3) yaklaşık aynı olduğunu göstermiştir. Infrared spektrum (IR) ve X-ray ışını kırınımı analizleri sonuçları ise bu bulguları doğrulamıştır. Ayrıca taramalı elektron mikroskobu ve IR spektrum sonuçları yapay sindirim ortamındaki maddelerin, zeolit yüzeyinde adsorplanmadıklarıını göstermektedir. Sonuç olarak doğal zeolitler, yapay sindirim sırasında yapısal stabilitelerini kaybetmemektedirler.
  • Article
    Citation - WoS: 16
    Citation - Scopus: 19
    Designing of Spherical Chitosan Nano-Shells With Micellar Cores for Solvation and Safeguarded Delivery of Strongly Lipophilic Drugs
    (Elsevier Ltd., 2017) Cihan, Esra; Polat, Mehmet; Polat, Hürriyet
    Chitosan is a very effective biopolymer for drug delivery purposes due to its biocompatibility, positive charge and exceptionally pH sensitive degradability behavior in an aqueous medium. Nevertheless, its inability for dissolving lipophilic drug active material and the difficulties in controlling the size and shape of the synthesized particles in nanometer range are critical drawbacks in its effective use. In this study, a synthesis procedure which addresses both issues simultaneously is presented. The procedure is based on initial dissolution of lipophilic drug molecules within the hydrophobic cores of the micelles of a bio-compatible block-copolymer by ionic gelation and subsequent formation of a chitosan shell by polymerization around the micellar structures. Well-formed, hollow and perfectly spherical chitosan particles (nano-shells) in the 30–300 nm size range could be successfully manufactured. Characterization by STEM, TEM, AFM, FTIR and DLS, DLS-LDV techniques showed clearly that the drug was successfully incorporated into the chitosan structure. It was demonstrated that the particles enveloped the micelle(s) of a Pluronic copolymer (P-123) whose hydrophobic cores contained a strongly hydrophobic drug Probucol. The chitosan nano-shells are expected to act as an agent protecting the integrity of the drug-loaded micelles in the body fluid while providing a pH sensitive release medium. The drug uptake by the chitosan particles was very high. A very sharp increase in the amount of the drug released with a slight change in the acidity of the medium was an indication of the potential of the manufactured chitosan nano-shells as pH sensitive, target specific delivery vehicles for drug release.