Chemical Engineering / Kimya Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/14

Browse

Search Results

Now showing 1 - 4 of 4
  • Article
    Impact of Titania Phase Structure and Surface Reactivity on the Photocatalytic Degradation of Various Dyes and Textile Wastewater
    (National Institute of Science Communication and Policy Research, 2023) Yurtsever, Hüsnü Arda; İloğlu, Onur; Çiftçioğlu, Muhsin
    Titania (TiO2) powders have been prepared by precipitation method in different precipitation media which contain sulfate, nitrate or organic species. Photocatalytic degradation of different dyes and a real textile wastewater have been conducted with these powders along with commercial powder Degussa P25 for comparison. Ethyl alcohol (organic medium), sulfuric acid (sulfate medium) and nitric acid (nitrate medium) have been used to dissolve titanium precursor for the precipitation of TiO2 in ammonia solution. UV-Vis DRS and XPS results indicate that S doping in sulfate medium precipitated powder and N doping in nitrate medium precipitated powder has been occurred and the presence of S or N containing impurities on the grain boundaries have been improved light absorption of TiO2 significantly. However, these powders have exhibited low surface reactivities. The highest surface reactivity has been obtained with the powder precipitated in organic medium which also has the highest crystallite sizes (76 nm rutile and 34 nm anatase crystallites) with relatively low rutile weight percentage (10.0%). The surface-normalized rate constants of this powder are 0.02038 min-1.m-2 in real textile wastewater degradation and 0.0161 min-1.m-2 in methyl orange degradation, which are 0.01563 and 0.0091 min-1.m-2, respectively, for Degussa P25. Results have shown that this powder show 30-70% higher surface reactivities compared to Degussa P25. The main structural difference of organic medium precipitated powder and Degussa P25 has been found to be the anatase-rutile weight ratio and crystallite size of rutile phase whereas band gap energy of Degussa P25 is lower and other properties are not significantly different.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    Photocatalytic and Optical Properties of Zinc Oxide Structures Prepared at Different Urea Concentrations
    (Serban Solacolu Foundation, 2020) Uysal, Berk; Şen, Selin; Top, Ayben
    In this study, ZnO samples were synthesized using zinc acetate and urea with a method containing sonication, sol-gel transition and calcination steps. Urea to zinc acetate mole ratio values were changed as 0, 0.5, 1, and 2 and corresponding calcined samples were denoted as UZ-0, UZ-0.5, UZ-1, and UZ-2, respectively. Scanning electron microscopy (SEM) images indicated globular and rod-like structures. Aspect ratios of the nanorods increased as urea to zinc acetate ratio increased from 0 to 1 whereas nanoparticles with sizes of 70 +/- 20 nm were observed for UZ-2 sample. Brunauer, Emmett and Teller (BET) surface area values of the samples varied between 9 and 25 m(2)/g and increased as initial urea amount increased. Band gap energies of the samples ranged between 3.24 and 3.29 eV. Four major peaks at about 400, 420, 480 and 530 nm with different intensities were observed in the photoluminescence (PL) spectra of the samples. All the samples removed rhodamine B by both adsorption and photodegradation. The highest visible light induced photodegradation rate was exhibited by UZ-2 sample having the highest surface area and it is attributed to superior charge separation properties of this sample under visible light.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 5
    Evaluation of Liposomal and Microbubbles Mediated Delivery of Doxorubicin in Two-Dimensional (2d) and Three-Dimensional (3d) Models for Breast Cancer
    (Galenos Publishing House, 2021) Aydın,M.; Özdemir,E.; Altun,Z.; Kılıç,S.; Aktaş,S.
    Objective: Liposomal cancer treatment strategies are useful in removing the side effects that were the main concern in recent years. In this study, we prepared microbubble (MBs) conjugated with DOX-loaded liposomes (DOX-loaded MBs) and investigated their effectiveness in in vitro breast cancer cells in two dimensions (2D) and three dimensions (3D). Materials and Methods: With this aim, breast cancer cells with different features (4T1, MDA-MB231, MCF-7) were growth in 2D and 3D dimensions. The cytotoxic and cell death effects under different conditions, durations and doses were evaluated with WST-1, trypan-blue, colony counts. Apoptotic effects were investigated with flow cytometric Annexin-V-PI and immunohistochemical (Ki-67, caspase 3, 8, 9) methods. Results: After free DOX and LipoDOX were applied, the proliferation index of three cell lines reduced. Intrinsic and extrinsic apoptotic pathways were activated in both 2D and 3D models. However, this effect was observed at lower levels in the 3D model due to the difficulty of diffusion of DOX into the spheroids. Additionally, the suitability of the 3D model for breast cancer cells was supported by formation of ductus-like structures and spheroids. Cell deaths were not observed significantly with the DOX-loaded microbubbles due to rising of MBs to the surface and not reaching spheroids held in matrigel of 3D model. Conclusion: DOX and LipoDOX showed anti-proliferative and apoptosis-inducing effects in breast cancer cells. However, these effects indicated variability depending on the cell lines and 2D or 3D model types. ©Copyright 2021 by the the Turkish Federation of Breast Diseases Societies.
  • Article
    Citation - WoS: 14
    Xenograft Tumor Volume Measurement in Nude Mice: Estimation of 3d Ultrasound Volume Measurements Based on Manual Caliper Measurements
    (Dokuz Eylül Üniversitesi, 2020) Barış, Mustafa; Serinan, Efe; Çalışır, Meryem; Şimşek, Kürşat; Aktaş, Safiye; Yılmaz, Osman; Seçil, Mustafa; Kılıç Özdemir, Sevgi
    Objectives: Volume measurement of subcutaneous xenograft tumors in nude mice models is an important metric to assess tumor growth or response to therapy. Manual calipers are widely used for this purpose. But the measurements with manual calipers may be inaccurate. Contrarily, three-dimensional (3D) ultrasonographic measurements give reliable and accurate tumor volume calculation. We aim to; evaluate the accuracy of common four formulas given in the literature to estimate xenograft tumor volumes based on manual caliper measurements and offer a new coefficient for a better estimation of the tumor volumes. Patients and Methods: Detailed manual diameter measurements of xenograft tumors were in 14 nude mice performed using Vernier caliper. Tumor volumes were calculated using the suggested formulas in the literature based on manual measurements. 3D ultrasound volume measurements were performed on same xenograft tumors using high resolution Vevo 2100 imaging system. To propose a new coefficient; means of ratio between manual and ultrasound volume measurement values were used. Also, data set was divided into two subgroups as tumor volume under 800 mm3 and over 800 mm3. New coefficients for each subgroup were defined. Results: Only with prolate ellipsoid formula there was no statistically significant difference between volume measurements with two methods (p=0,24). Our proposed formula (0,45 L*W*H) could estimate tumor volumes as good as prolate ellipsoid formula. Coefficient 0,35 and 0,81 in the same formula were found efficient in the selected subgroups. Conclusion: Using one common coefficient/formula for tumor volume estimation in any tumor size can be inaccurate. Appropriate coefficient should be chosen according to the dataset worked with.