Chemical Engineering / Kimya Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/14

Browse

Filters

2015 - 201922020 - 20253

Settings

Department: search.filters.department.İzmir Institute of TechnologyScopus Q: search.filters.scopusQuartile.Q2

Search Results

Now showing 1 - 5 of 5
  • Article
    Citation - WoS: 1
    Citation - Scopus: 1
    Optimized Lithium(I) Recovery From Geothermal Brine of Germencik, Türkiye, Utilizing an Aminomethyl Phosphonic Acid Chelating Resin
    (Taylor and Francis Ltd., 2025) Recepoğlu, Y.K.
    This study investigates the performance of Lewatit TP 260 ion exchange resin for the efficient recovery of lithium (Li(I)) from geothermal water sourced from the Germencik Geothermal Power Plant in Türkiye. A series of batch sorption experiments were performed to evaluate the influence of key parameters, including resin dosage, solution pH, temperature, initial Li(I) concentration, and contact time, on the Li(I) recovery process. The optimal conditions were determined to be a resin dose of 0.5 g per 25 mL of geothermal water, pH in the range of 6–8, and a temperature of 25°C. Under these conditions, the resin achieved a maximum Li(I) recovery rate of 71% from the geothermal water. Sorption isotherms were further analyzed using the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) models. Among these, the Langmuir model provided the best fit (R² = 0.9841), suggesting a maximum sorption capacity (qm) of 4.31 mg/g. Continuous recovery experiments conducted in column mode confirmed the practical applicability of Lewatit TP 260, achieving a total sorption capacity of 0.41 mg Li(I)/mL resin. The findings exhibit the potential of this resin as a viable sorbent for sustainable Li(I) extraction from geothermal brines, supporting the development of green energy technologies and contributing to the circular economy. © 2024 Taylor & Francis Group, LLC.
  • Erratum
    Citation - WoS: 1
  • Article
    Citation - WoS: 6
    Citation - Scopus: 6
    Synthesis of a Novel Cellulose-Based Adsorbent From Olive Tree Pruning Waste for Removal of Boron From Aqueous Solution
    (Springer Science and Business Media Deutschland GmbH, 2024) Altınbaş, B.F.; Yüksel, A.
    This work investigated the valorization of olive tree pruning debris as a biosorbent for the removal of environmentally hazardous boron from aqueous solution using batch adsorption. For this purpose, a novel, waste-based, boron selective biosorbent from olive tree pruning waste (N-OPW) was synthesized. Alkali pretreatment, followed by glycidyl-methacrylate (GMA) grafting and providing boron selectivity with n-methyl-d-glucamine (NMDG) steps, was applied to the biomass, respectively. N-OPW was characterized using SEM, TGA, and FT-IR analyses. N-OPW showed excellent boron biosorption capacity (21.80 mg/g) in an operation pH range between 2 and 12. The equilibrium was attained in 2 h and the Freundlich isotherm (R2 = 0.997) and pseudo-second-order kinetics (R2 = 0.99) provided the strongest match to experimental data. According to thermodynamic studies, boron adsorption was exothermic (ΔH = −34.14 kJ/mol). The reusability tests with real geothermal water showed that adsorbent had no significant decrease in boron removal capacity while desorbing >99% of the boron adsorbed for three cycles of adsorption/desorption. Results indicated that a promising, reusable, and boron selective biosorbent was successfully synthesized while utilizing olive pruning waste. Graphical abstract: (Figure presented.) © The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature 2023.
  • Article
    Citation - WoS: 29
    Citation - Scopus: 35
    Sustainable Bio-Nano Composite Coatings for the Protection of Marble Surfaces
    (Elsevier Masson SAS, 2015) Ocak, Y.; Sofuoglu, A.; Tihminlioglu, F.; Böke, H.
    Water repellency on natural stone surfaces is the most important issue in the protection of stone monuments from effects of atmospheric pollutants. In this study, effectiveness of a bio-nano composite coating, composed of a biodegradable polymer (poly-L-lactide [PLA]) and montmorillonite clay (MMT) was investigated for the protection of marble surfaces from pollution. The clay dispersion in polymer matrices was analyzed by using Scanning Tunnel Electron Microscopy (STEM) and X-Ray Diffraction (XRD), while protection performance was investigated by the measurement of surface roughness, wettability, water vapor permeability, capillary water absorption, and color changes on the marble surfaces. As a result, no alteration on the color of coated marbles was observed, significant improvement was obtained for hydrophobicity of the surface and inhibition of sulfation reaction on the exposed marble surfaces under acidic atmosphere. It could be said that PLA based nanocomposites seem to be promising materials as protective coating agents in reducing the effects of water and atmospheric pollutants on marble surfaces. © 2014 Elsevier Masson SAS.
  • Article
    Citation - WoS: 35
    Citation - Scopus: 40
    Olive Leaf Extract as a Crosslinking Agent for the Preparation of Electrospun Zein Fibers
    (John Wiley and Sons Inc., 2015) Erdogan, I.; Demir, M.; Bayraktar, O.
    Incorporating active agents, reinforcing structure by crosslinking, thus changing release properties, can be listed as possible modifications in preparation methods of biopolymer fibers. This study introduces oleuropein, major component of olive leaf extract (OLE), as a natural functional crosslinker for electrospun zein fibers, owing to its antioxidant and antimicrobial properties. Incorporation of OLE causes morphological and structural changes indicated by a decrease in fiber diameter up to 27%, an increase in intensity of NH bending region due to interaction with -OH groups and observation of characteristic oleuropein bands. Extract addition also enhances thermal stability. Zein fibers without OLE is fully degraded at 600C, whereas 10% of OLE loaded zein fibers is left undegraded. Fifty percent of initial phenolic content loaded into fibers is released which indicate the effect of OLE incorporation as accumulation of oleuropein. OLE-incorporated fibers immersed in PBS are less fused than pure zein fibers, due to the crosslinking effect. © 2014 Wiley Periodicals, Inc.