Chemical Engineering / Kimya Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/14

Browse

Filters

2004 - 200922010 - 20131

Settings

Department: search.filters.department.İzmir Institute of Technology. Materials Science and EngineeringPublisher: search.filters.publisher.Elsevier Ltd.

Search Results

Now showing 1 - 3 of 3
  • Article
    Citation - WoS: 96
    Citation - Scopus: 131
    Barrier Properties of Corn Zein Nanocomposite Coated Polypropylene Films for Food Packaging Applications
    (Elsevier Ltd., 2013) Özçalık, Onur; Tıhmınlıoğlu, Funda; Tıhmınlıoğlu, Funda; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    The feasibility of corn zein nanocomposite (CZNC) coatings as an alternative to synthetic polymer barrier layer on polypropylene (PP) films was examined. The effect of layered silicate content in the CZNC layers on the barrier and surface hydrophobicity of the CZNC-PP films were investigated. Incorporation of organomodified montmorillonite (OMMT) by solution intercalation into zein matrix significantly improved oxygen and water vapor barrier of coated PP films. The barrier properties were also investigated theoretically by using various phenomenological permeability models. Tortuous permeation path formed by the fine delamination of nanoclays was found to be responsible for the barrier improvements in zein layers. In conclusion, durable CZNC-PP laminates were developed. CZNC coating of PP films has reduced the oxygen permeability nearly four times, while water vapor permeability reduced by 30% with 5 wt.% OMMT content in 5.9 μm corn zein coating.
  • Article
    Citation - WoS: 35
    Citation - Scopus: 42
    Membrane Formation by Dry-Cast Process: Model Validation Through Morphological Studies
    (Elsevier Ltd., 2005) Alsoy Altınkaya, Sacide; Yenal, Hacer; Alsoy Altınkaya, Sacide; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    Asymmetric membranes were prepared by dry-cast phase inversion technique from a cellulose acetate, acetone, water solution in order to assess the validity of the mathematical model recently developed by us. Based on the model predictions, general structural characteristics of the membranes were determined by plotting the composition paths on the ternary phase diagram and polymer concentration profile at the first moment of precipitation. Composition paths on the ternary phase diagram enable the assessment of whether a phase separation occurs and allow prediction of inception time and duration of the phase separation. The polymer distribution at the moment of precipitation provides a rough thickness of the high polymer concentration region near the interface and a pore distribution of the sublayer structure. The effects of polymer/nonsolvent ratio in the casting solution, the initial film thickness, evaporation temperature, relative humidity and velocity of air were investigated. Model predictions were compared with the morphological analysis conducted using scanning electron microscopy. Results show that diffusion formulation plays an important role in capturing the accurate structure of the membrane from the model predictions.
  • Article
    Citation - WoS: 50
    Citation - Scopus: 65
    Modeling of Asymmetric Membrane Formation by Dry-Casting Method
    (Elsevier Ltd., 2004) Alsoy Altınkaya, Sacide; Özbaş, Bülent; Alsoy Altınkaya, Sacide; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    Many polymeric membranes are produced by phase inversion technique invented by Loeb and Sourirajan in 1962. The dry-casting method is one of the major phase inversion techniques in which a homogeneous polymer solution consisting of solvent(s) and nonsolvent(s) is cast on a support and then evaporation of the casting solution takes place under convective conditions. In this paper, we model membrane formation by the dry-casting method. The model takes into account film shrinkage, evaporative cooling, coupled heat, and mass transfer and incorporates practical and reliable diffusion theory as well as complex boundary conditions especially at the polymer solution/air interface. The predictions from the model provide composition paths, temperature, and thickness of the solution. By plotting the composition paths on the ternary phase diagram, we ascertain the general structural characteristics of the membranes prepared from particular casting conditions. The predictive ability of the model was evaluated by comparing the results with the experimental data obtained from gravimetric measurements for cellulose acetate (CA)-acetone-water system. In an attempt to illustrate the importance of diffusion formalism on the predictions, recently proposed multicomponent diffusion theory and its simplified forms were utilized in the model. The computational results show that the critical factor for capturing the accurate behavior of membrane formation is the diffusion formalism utilized in the model