Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
2 results
Search Results
Conference Object Citation - WoS: 2Citation - Scopus: 2Effects of Mechanical Treatment on the Formation of Α-Al 2o3 From Gibbsite(Trans Tech Publications, 2004) Şakar Deliormanlı, Aylin; Çiftçioğlu, Muhsin; Polat, HürriyetIn this study preparation of fine alpha alumina powders derived from Bayer gibbsite was studied. Preparation of the alumina powders was performed by decomposition of the gibbsite into transition alumina phase followed by controlled transformation to the alpha phase. Gibbsite was thermally treated at 350°C and 900°C to obtain a transition form of alumina. The purpose of the heat treatment at 350°C was to increase the surface area of the gibbsite particles and obtain a loosely packed structure that may reduce the size of the rather coarse precursor gibbsite during the grinding step. Mechanical treatment (by using ultrasonic forces and impact forces) was utilized to increase the transformation rate to the alpha alumina in the transition phase matrix and influence the nucleation and growth rate of the solid -solid phase transformation. These powders were calcined at 1100, 1200 and 1450°C for 1 to 8 hours. Results indicated that transformation to the alpha phase was accomplished in the powders preheated at 900°C, ultrasonically treated or ground, and then calcined at 1200°C for 2 to 8 hours or at 1450°C for 2 hours. Ultrasonic treatment accelerated the transformation rate to the alpha phase at 1100°C in 2 hours. Powders that were calcined at 1100 to 1200°C for 1 hour had a significant kappa content together with the alpha phase. Additionally the powder prepared without mechanical treatment and calcined at 1100°C was mainly in the kappa phase.Conference Object Effect of Peo/Ppo Type Triblock Copolymers on Dispersion Behaviour of Aqueous Alumina Suspensions(Trans Tech Publications, 2001) Şakar, Aylin M.; Polat, Hürriyet; Çiftçioğlu, MuhsinThe aim of this study was to investigate the stability and dispersion behaviour of aqueous alumina suspensions in the presence of polyethylene oxide-polypropylene oxide-polyethylene oxide (PEO/PPO/PEO) type block copolymers. The influence of water soluble triblock copolymers with molecular weight ranging from 2900 to 12600 g/mole were tested at Φ = 0.125, 1, 10, 20 vol % solid loading alumina suspensions by rheological, turbidity, sedimentation and surface tension measurements. The results indicate that an alternative dispersant for alumina suspensions is the PEO/PPO triblock copolymers. Their stabilisation mechanism was attributed to the depletion stabilisation. Rheological measurements indicated that these block copolymers (at high EO percentages) coupled with ultrasonic treatment have a positive effect on the dispersion of the agglomerated alumina suspensions. It was not possible to create stable dispersions in the absence of ultrasonic bath treatment. Turbidity measurements at Φ = 0.025, 0.125 vol % showed that, alumina suspensions with PEO/PPO added were stable and have higher turbidity values than block copolymer free suspensions.