Chemical Engineering / Kimya Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/14

Browse

Filters

2000 - 2009172010 - 2019382020 - 202410

Settings

Language: search.filters.language.enWoS Q: search.filters.wosQuartile.N/A

Search Results

Now showing 1 - 10 of 65
  • Conference Object
  • Article
    Pomza ve Nsdd-pomza ile Sabit Yataklı Kolon Reaktörde Metilen Mavisi Giderimi: Deneysel ve Modelleme Çalışması
    (2019) Balcı, Esin; Ökten, Hatice Eser; Genişoğlu, Mesut; Recepoğlu, Yaşar Kemal; Gören, Ayşegül Yağmur
    Nano sıfır değerlikli demir (nSDD) yüksek renk konsantrasyonlarına sahip tekstil atıksularının arıtımında ekonomik ve çevre dostu bir adsorban olarak ortaya çıkmaktadır. Ancak nSDD partikülleri sulu çözeltilerde elektrostatik etkileşimler sebebiyle kolayca topaklaşmakta ve bu da arıtma veriminin düşmesine neden olmaktadır. Dolayısıyla düşük maliyetli, doğal poröz yapıda ve ortalama 2m2/gr spesifik yüzey alanına sahip pomza, nSDD topaklaşmasını önleyici bir malzeme olarak kullanılabilir. Bu çalışmada sadece pomza ve pomzanSDD (ağırlıkça 9:1) karışımının kullanıldığı kolon reaktörde 25, 50, 75 ve 100 mg/L metilen mavisi konsantrasyonları için arıtma verimleri incelenmiştir. Pomzanın ve pomza-nSDD karışımının 100 mg/L metilen mavisi deneyindeki toplam kapasiteleri sırasıyla 2,8 ve 4,2 mg/g-adsorban olarak bulunmuştur. Özellikle düşük konsantrasyonlarda, pomza-nSDD karışımının arıtma performansını önemli ölçüde arttırdığı görülmüştür. Thomas modeli deneysel verilere uygulanmış ve modelin öngörü gücünün düşük konsantrasyonda yüksekken, yüksek konsantrasyonlarda ortalama olduğu kanısına varılmıştır.
  • Book Part
    A Study on Absorption and Reflection of Infrared Light by the Uncoated and Al Coated Surfaces of Polymer Films Techniques
    (Apple Academic Press, 2014) Arkış, Esen; Balköse, Devrim
    Polymer films coated with a thin layer of aluminum or aluminum oxide are extensively used in food packing as heat shields. The infrared rays were not transmitted through the films and were reflected protecting the contents from the harmful effects of infrared light. The quantitative measurement of the film thickness and infrared light reflection and absorption capacities of aluminum coated films used as packing materials were possible using infrared spectroscopy. © 2015 by Apple Academic Press, Inc.
  • Book Part
    Advances in Nanocomposite Membranes for CO2 Removal
    (Elsevier, 2024) Marpani,F.; Othman,N.H.; Alias,N.H.; Mat Shayuti,M.S.; Alsoy Altınkaya, Sacide
    Nanocomposite membranes have emerged as a promising solution for efficient carbon dioxide (CO2) removal in gas separation processes. These membranes combine polymeric matrices with inorganic nanofillers to synergize the excellent separation performance of inorganic materials with the mechanical stability of polymers. The choice of nanofillers, such as porous and nonporous materials, significantly influences the gas permeability and selectivity of the resulting nanocomposite membranes. Porous fillers with interstitial channels and large surface areas are found to selectively adsorb CO2, enhancing membrane separation performance. On the other hand, nonporous fillers alter the polymer chain orientation, influencing gas separation differently. The 1D, 2D, and 3D morphologies of nanofillers offer unique properties in terms of surface-to-volume ratio, permeability, and selectivity. The fabrication of nanocomposite membranes also plays a crucial role, and advances in materials and manufacturing techniques have enabled the design of high-performing membranes. Asymmetric and symmetric configurations have been explored to optimize separation efficiency. Nevertheless, challenges such as aging, compaction, and swelling need to be addressed to ensure the long-term stability of nanocomposite membranes. Future research should focus on developing advanced theoretical models to better predict gas permeation behaviors in these membranes. Overall, nanocomposite membranes offer a promising avenue for efficient CO2 removal, contributing to sustainable environmental practices and energy production. © 2024 Elsevier Ltd. All rights reserved.
  • Book Part
    Calcium Soap Lubricants
    (CRC Press, 2015) İzer, Alaz; Kahyaoğlu, Tuğçe Nefise; Balköse, Devrim
    The reparation and characterization of calcium stearate (CaSt2) and a lubricant by using calcium stearate were aimed at in this study. Calcium stearate powder was prepared from sodium stearate and calcium chloride by precipitation from aqueous solutions. CaSt2 and the Light Neutral Base oil were mixed together to obtain lubricating oil. It was found that CaSt2 had a melting temperature of 142.8 °C and in base oil it had a lower melting point, above 128 °C. It was dispersed as lamellar micelles as the optical micrographs had shown. From rate of settling the size of dispersed particles were found to be 1.88 µm and 0.11 µm for lubricants having 1% and 2% CaSt2, respectively. The friction coefficient and wear scar diameter of base oil 0.099 and 1402 nm were reduced to 0.0730 and 627.61 nm respectively for the lubricant having 1% CaSt2. Lower wear scar diameter (540 nm) was obtained for lubricant with 2% CaSt2. CaSt2 improved the lubricating property of the base oil but did not improve its oxidative and thermal stability. © 2015 by Apple Academic Press, Inc.
  • Correction
    Citation - WoS: 1
    Erratum: Bioactive Snail Mucus-Slime Extract Loaded Chitosan Scaffolds for Hard Tissue Regeneration: the Effect of Mucoadhesive and Antibacterial Extracts on Physical Characteristics and Bioactivity of Chitosan Matrix (Biomedical Materials (Bristol) (2021) 16 (065008) Doi: 10.1088/1748-605x
    (IOP Publishing, 2023) Perpelek, M.; Tamburaci, S.; Aydemi̇r, S.; Tıhmınlıoğlu, F.; Baykara, B.; Karakaşli, A.; Havitçioǧlu, H.
    The authors regret that some errors were identified in 'figures 12 and 13' on pages 14 and 15, in the published manuscript concerning fluorescence microscopy images of Saos-2 and SW1353 cells on scaffolds for 1 and 3 d of incubation. The fluorescence images in figures 12 and 13 were mistakenly used as duplicated due to the inadvertently mislabeling during the processing of files and integrating them into the final figures. Intensity data regarding corrected fluorescence images were also measured and corrected. The revised figures (figures 12 and 13) and their captions appear below. The authors apologize for this error and state that this does not change the scientific conclusions of the article in any way. (Figure Presented). © 2023 IOP Publishing Ltd.
  • Book Part
    Citation - Scopus: 2
    Data Driven Leak Detection in a Real Heat Exchanger in an Oil Refinery
    (Elsevier, 2023) Yasmal, Aslı; Kuşoğlu Kaya, Gizem; Oktay, Emirhan; Çölmekci, Ceylan; Uzunlar, Erdal
    This study focuses on implementation of a data-based leak detection method in a heat exchanger in a petroleum refinery. We have studied on the two real leakage cases in a heat exchanger in Izmit TUPRAS Refinery. Leaks are one of the major problems that occur in operations. The autoencoder (AE) method is implemented for leak detection. Reconstruction error is used as the leak indicator. In case of leakage, the reconstruction value is expected to increase. For both cases examined, the reconstruction error is found to be around 1-5 under normal operating conditions. On the other hand, reconstruction error is observed to change between 10 and 60 under the conditions with leakage. Besides, the AE is able to indicate the start of one leakage case before the process engineers noticed it. © 2023 Elsevier B.V.
  • Article
    Citation - Scopus: 2
    A Comparative Assessment for Efficient Oleuropein Extraction From Olive Leaf (olea Europaea L. Folium)
    (Murat Yakar, 2023) Recepoğlu, Yaşar Kemal; Gümüşbulut, Gülin; Yüksel Özşen, Aslı
    Since oleuropein has long been known in the health sector and is abundant directly in our country as the fourth largest olive producer, oleuropein, the predominant phenolic ingredient in olive leaves, was recovered in this study using Soxhlet extraction. The effects of different solvent types (acetonitrile, ethanol, methanol, and water), extraction period (4 cycles, 4 h, and 8 h), particle size (250-500 µm and 900-2000 µm), and pretreatment of olive leaves on the yield of oleuropein were examined to determine the maximum yield. A greater oleuropein yield was obtained when the particle size of olive leaves utilized for extraction was lowered. Furthermore, aqueous solvents revealed a higher yield of oleuropein than pure solvents and prolonging the extraction duration resulted in a significant increase in the amount of oleuropein extracted. On the other hand, pretreatment of olive leaves resulted in a reduction in oleuropein output. As a result, with 36% extraction efficiency in terms of olive leaf conversion, the highest oleuropein extraction yield was obtained as 13.35 mg g-1 dry leaf for 8 h of extraction time using olive leaves with a particle size of 250-500 µm and an 80% methanol solution as solvent. © Author(s) 2023.
  • Book Part
    Citation - Scopus: 3
    Tissue Engineering Applications of Marine-Based Materials
    (Springer, 2022) Polat, Hürriyet; Zeybek, Nuket; Polat, Mehmet
    Tissue engineering is a promising approach in replacing or improving tissues lost or has become nonviable due to disease or trauma by the use of scaffold materials by combining engineering and biochemical/physicochemical methods. Its purpose is to create suitable matrices that support cell differentiation and proliferation toward the formation of new and functional tissue. Marine-based natural compounds are potential scaffold feedstock material in tissue engineering owing to their biocompatibility and biodegradability while providing excellent biochemical/physicochemical properties. Numerous application areas and various fabrication routes techniques described in the literature attest to the importance of these materials in tissue regeneration. This review has been carried to merge the information from a large number of studies on the marine-based scaffold materials in tissue engineering into a coherent summary. © The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Singapore Pte Ltd. 2022.
  • Research Project
    Nanolifli yapıda, sinir büyüme faktörü yüklü mikro küreleri içeren jalatin bazlı doku iskelelerinin hazırlanması ve karakterizasyonu
    (TÜBİTAK - Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, 2014) Altınkaya, Sacide; Erdal, Esra; Büyüköz, Melda
    In living organisms most of the tissues have the capability of regeneration; on the other hand, this situation is different in mammalian adult neural cells since they loose their ability of proliferation. Compared to peripheral nervous system, central nervous system has restricted regeneration capability which results in trauma, stroke and neuropathology etc. The first studies for the regeneration of nervous system concentrated on the use of autographs, tissue transplanted from one part of the body to another in the same individual, but it has limitations including short-age. Another type of investigation was allograft, which is transplantation of cells isolated from cadavers to the patient, but this approach is also not suitable because of host immune rejection. A new hope to cure neurodegenerative diseases appeared with biomaterials and tissue engineering studies. In this study, it is aimed to develop a novel, nanofibrous scaffolds with the capability of controlled releasing neural growth factor loaded in microspheres. Nanofibrous and oriented scaffolds were prepared from gelatin by a combination of thermally induced phase separation (TIPS), porogen-leaching and molding techniques while alginate microspheres were produced in oil in water emulsion through cross linking of alginate with calcium ions. The bioactivity of the growth factor released from microspheres was determined using PC12 cell line, derived from rat adrenal medulla and differentiate when treated with nerve growth factor. The scaffolds including connected pores with a high porosity, nanofibrous structure which mimic the extracellular matrix and properties similar to natural brain tissure were produced. Compared to solid walled scaffolds, nanofibrous scaffolds allow attachment of cells without any change in their morphologies. Model protein Į-chemotripsin and bovin serum albumin used for protecting the activity of nerve growth factor were loaded in alginate microspheres with an encapsulation efficiency of 100 %. It was found that NGF loaded into microspheres can maintain its activity and it can even differentiate PC-12 cells in a shorter time compared to NGF directly added into cell culture medium.