Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
5 results
Search Results
Article Citation - WoS: 91Citation - Scopus: 95Source Apportionment and Carcinogenic Risk Assessment of Passive Air Sampler-Derived Pahs and Pcbs in a Heavily Industrialized Region(Elsevier Ltd., 2018) Çetin, Banu; Yurdakul, Sema; Güngörmüş, Elif; Öztürk, Fatma; Sofuoğlu, Sait CemilCancer has become the primary reason of deaths in Dilovasi probably due to its location with unique topography under the influence of heavy industrialization and traffic. In this study, possible sources and carcinogenic health risks of PAHs and PCBs were investigated in Dilovasi region by Positive Matrix Factorization (PMF) and the USEPA approach, respectively. PAHs and PCBs were measured monthly for a whole year at 23 sampling sites using PUF disk passive samplers. Average ambient air concentrations were found as 285 ± 431 ng/m 3 and 4152 ± 6072 pg/m 3 , for Σ 15 PAH and Σ 41 PCB, respectively. PAH concentrations increased with decreasing temperature especially at urban sites, indicating the impact of residential heating in addition to industrial activities and traffic. On the other hand, PCB concentrations mostly increased with temperature probably due to enhanced volatilization from their sources. Possible sources of PAHs were found as emissions of diesel and gasoline vehicles, biomass and coal combustion, iron and steel industry, and unburned petroleum/petroleum products, whereas iron-steel production, coal and biomass burning, technical PCB mixtures, and industrial emissions were identified for PCBs. The mean carcinogenic risk associated with inhalation exposure to PAHs and PCBs were estimated to be >10 −6 and >10 −5 , respectively, at all sampling points, while the 95th percentile was >10 −5 at 15 of 23 and >10 −4 at 8 of 23 sampling locations, respectively. Probabilistic assessment showed, especially for PCBs, that a majority of Dilovasi population face significant health risks. The higher risks due to PCBs further indicated that PCBs and possibly other pollutants originating from the same sources such as PBDEs and PCNs may be an important issue for the region.Article Citation - WoS: 9Citation - Scopus: 13An Exposure–risk Assessment for Potentially Toxic Elements in Rice and Bulgur(Springer Verlag, 2017) Sofuoğlu, Sait Cemil; Sofuoğlu, AysunRice and wheat are rich sources of essential elements. However, they may also accumulate potentially toxic elements (PTE). Bulgur, the popular alternative to rice in the eastern Mediterranean, is produced by processing wheat, during which PTE content may change. This study determined PTE concentrations in rice and bulgur collected from 50 participant households in the City of Izmir, Turkey, estimated ingestion exposure, and associated chronic-toxic and carcinogenic human health risks. Comparison of the determined concentrations to the available standard levels and the levels reported in the literature revealed that Cd, Co, and Pb in rice might be of concern. The estimated health risks of individual participants supported this result with exceedance of respective threshold or acceptable risk levels at the 95th percentile. Population risk estimates indicated that the proportion with higher than the threshold or acceptable risk is about 10%, 24%, and 12% for Cd, Co, and Pb in rice, respectively. Results of this study showed that health risks associated with PTE exposure through bulgur consumption are lower than those of rice, and below the threshold or acceptable risk levels.Article Citation - WoS: 163An Assessment of Indoor Air Concentrations and Health Risks of Volatile Organic Compounds in Three Primary Schools(Elsevier Ltd., 2011) Sofuoğlu, Sait Cemil; Aslan, Güler; İnal, Fikret; Sofuoğlu, AysunConcentrations of volatile organic compounds (VOCs), including formaldehyde, in classrooms, kindergartens, and outdoor playgrounds of three primary schools were measured in spring, winter, and fall terms in Izmir, Turkey. A health-risk assessment was conducted for odor detection, sensory irritation, chronic toxic effects, and cancer. Active sampling was applied for VOCs and formaldehyde on Tenax TA and DNPH tubes, respectively. VOCs were analyzed in a thermal desorption-GC-MS system. Formaldehyde analysis was performed using an HPLC instrument. Benzene, toluene, and formaldehyde were the most abundant compounds with 95th percentile indoor air concentrations of 29, 87, and 106μg/m3, respectively. Naphthalene and xylenes followed them with an order of magnitude lower concentrations. Two isomers of dichlorobenzene (1,3 and 1,4) were the other notable compounds. The concentrations were utilized to classify the indoor air pollutants with respect to potential health effects. In addition, carcinogenic and chronic toxic risks were estimated using Monte-Carlo simulation. Formaldehyde appears to be the most concerning pollutant with high chronic toxic and carcinogenic risk levels according to the health assessment followed by naphthalene, benzene, and toluene due to their chronic effects.Article Citation - WoS: 74Citation - Scopus: 89Seasonal Variation in Drinking Water Concentrations of Disinfection By-Products in Izmir and Associated Human Health Risks(Elsevier Ltd., 2008) Baytak, Derya; Sofuoğlu, Aysun; İnal, Fikret; Sofuoğlu, Sait CemilSeasonal variation in concentrations of two different disinfection by-product groups, trihalomethanes (THMs) and haloacetonitriles (HANs), was investigated in tap water samples collected from five sampling points (one groundwater and four surface water sources) in İzmir, Turkey. Estimates of previously published carcinogenic and non-carcinogenic risks through oral exposure to THMs were re-evaluated using a probabilistic approach that took the seasonal concentration variation into account. Chloroform, bromoform, dibromochloromethane and dichloroacetonitrile were the most frequently detected compounds. Among these, chloroform was detected with the highest concentrations ranging from 0.03 to 98.4 μg/L. In tap water, at the groundwater supplied sampling point, brominated species, bromoform and dibromoacetonitrile, were detected at the highest levels most probably due to bromide ion intrusion from seawater. The highest total THM and total HAN concentrations were detected in spring while the lowest in summer and fall. The annual average total THM concentration measured at one of the surface water supplied sampling points exceeded the USEPA's limit of 80 μg/L. While all non-carcinogenic risks due to exposure to THMs in İzmir drinking water were negligible, carcinogenic risk levels associated with bromodichloromethane and dibromochloromethane were higher than one in million.Article Citation - WoS: 104Citation - Scopus: 115An Exposure and Risk Assessment for Fluoride and Trace Metals in Black Tea(Elsevier Ltd., 2008) Sofuoğlu, Sait Cemil; Kavcar, PınarExposure and associated health risks for fluoride and trace metals in black tea were estimated. Fifty participants were randomly recruited to supply samples from the tea that they drink, and self-administer a questionnaire that inquired about personal characteristics and daily tea intake. Analyzed trace metals included aluminum, arsenic, barium, cadmium, cobalt, chromium, copper, manganese, nickel, strontium, and zinc. Fluoride and four metals (Al, Cr, Mn, Ni) were detected in all samples while barium was detected only in one sample. The remaining metals were detected in >60% of the samples. Fluoride and aluminum levels in instant tea bag samples were greater than in loose tea samples (p < 0.05) while the differences in elemental concentrations of loose and pot bag tea samples were not significant. Median and 90th percentile daily tea intake rates were estimated as 0.35 and 1.1 l/day, respectively. Neither fluoride nor aluminum levels in black tea were found to associate with considerable risks of fluorosis and Alzheimer's disease, respectively. However, carcinogenic risk levels for arsenic were high; R > 1.0 × 10-6 even at the median level. According to sensitivity analysis, daily tea intake was the most influencing variable to the risk except for arsenic for which the concentration distribution was of more importance.
