Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
3 results
Search Results
Article Pomza ve Nsdd-pomza ile Sabit Yataklı Kolon Reaktörde Metilen Mavisi Giderimi: Deneysel ve Modelleme Çalışması(2019) Balcı, Esin; Ökten, Hatice Eser; Genişoğlu, Mesut; Recepoğlu, Yaşar Kemal; Gören, Ayşegül YağmurNano sıfır değerlikli demir (nSDD) yüksek renk konsantrasyonlarına sahip tekstil atıksularının arıtımında ekonomik ve çevre dostu bir adsorban olarak ortaya çıkmaktadır. Ancak nSDD partikülleri sulu çözeltilerde elektrostatik etkileşimler sebebiyle kolayca topaklaşmakta ve bu da arıtma veriminin düşmesine neden olmaktadır. Dolayısıyla düşük maliyetli, doğal poröz yapıda ve ortalama 2m2/gr spesifik yüzey alanına sahip pomza, nSDD topaklaşmasını önleyici bir malzeme olarak kullanılabilir. Bu çalışmada sadece pomza ve pomzanSDD (ağırlıkça 9:1) karışımının kullanıldığı kolon reaktörde 25, 50, 75 ve 100 mg/L metilen mavisi konsantrasyonları için arıtma verimleri incelenmiştir. Pomzanın ve pomza-nSDD karışımının 100 mg/L metilen mavisi deneyindeki toplam kapasiteleri sırasıyla 2,8 ve 4,2 mg/g-adsorban olarak bulunmuştur. Özellikle düşük konsantrasyonlarda, pomza-nSDD karışımının arıtma performansını önemli ölçüde arttırdığı görülmüştür. Thomas modeli deneysel verilere uygulanmış ve modelin öngörü gücünün düşük konsantrasyonda yüksekken, yüksek konsantrasyonlarda ortalama olduğu kanısına varılmıştır.Article Citation - Scopus: 7Binder Effect on Electrochemical Performance of Zinc Electrodes for Nickel-Zinc Batteries(Turkish Chemical Society, 2018) Ebil, Özgenç; Cihanoğlu, GizemPolyethylene glycol (PEG) and polyvinyl alcohol (PVA) were used as a zinc electrode binder at different concentrations to enhance the electrochemical behavior of zinc electrodes for nickel-zinc (NiZn) batteries. ZnO powders synthesized by mechanochemical and hydrothermal precipitation methods were mixed with lead oxide, calcium hydroxide and binder to prepare zinc electrodes in pouch cell NiZn batteries. Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) analysis reveal that initial morphology of zinc electrode changes drastically regardless of the binder type and its loading after charge/discharge process, and even the charge/discharge process is not complete. The results show that the presence of PEG causes better discharge capacity compared to that of PVA as a binder. Zinc electrode prepared using commercial ZnO powder and 3 wt.% PEG gives the optimum discharge capability, with a specific capacity of approximately 311 mAhg-1, while zinc electrodes prepared using ZnO powder synthesized from ZnCl2 and Zn(NO3)2.6H2O and 6 wt.% PEG exhibit high specific energy of 255 and 275 mAhg-1, respectively. The results suggest a relationship between binder loading and battery capacity, but in-situ analysis of microstructural evolution of zinc electrode during charge/discharge process is needed to confirm this relationship.Article Citation - Scopus: 5Nano Zinc Borate as a Lubricant Additive(Turkish Chemical Society, 2018) Savrık, Sevdiye Atakul; Üstün, Fatma; Alp, Burcu; Balköse, DevrimLubricants consist of base oils and chemical additives such as dispersants, surfactants, oxidation inhibitors, and antiwear agents. Organic and inorganic boron-based additives increase wear resistance and decreases friction. Hexagonal boron nitride and metal borates are used for this purpose. Zinc borate is a synthetic hydrated metal borate. The production techniques of zinc borate generally include the reaction between zinc source materials (zinc oxide, zinc salts, zinc hydroxide) and the boron source materials (boric acid and borax). The nano zinc borate particles were prepared from zinc nitrate and borax in the present study by using low initial zinc and borate concentrations and low temperature to prevent particle growth. The templates span 60 and PEG 4000 were used to control the particle size. The particles were separated from mother liquor by centrifugation, washed with ethanol, dried and ground and used as additive to base oil. The particles have H2O and B(3)-O vibrations in their FTIR spectra. The empirical formula of the nanoparticles was approximately 3ZnO.2B2O3.4H2O from EDX and TGA analysis. X-ray diffraction diagram indicated the particles were in amorphous state. When the nanoparticles were added to light neutral oil the wear scar diameter and friction coefficient was lowered 50% and 20% respectively.