Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
10 results
Search Results
Article Mini modular plant design for ethylene production using Martian atmosphere on Mars(Elsevier, 2024) Deliismail, Özgün; Şeker, ErolA main shift in the competitive landscape of technology development is in 3D printing of complex articles made of variety of materials due to faster manufacturing and less human error in the production. In fact, it seems to be a viable candidate for the construction of structures for terrestrial and extraterrestrial life in future. Thus, new or damaged equipment in space explorations could be replaced instantly, and habitats could be manufactured using 3D printing in varying gravitational fields in the solar system. Among 3D printing materials, HDPE is commonly used in the projects, such as a prototype manufacturing or pipes or damp-proof membrane. This study initially focused on the preliminary design of the self-sustaining mini ethylene production plant from Martian atmosphere with scale-out architecture. UniSIM® was integrated with MATLAB® via CAPE-OPEN extension to design mini-ethylene production plant at low gravity. Ethylene capacity was found as 17.71 tons/year for 100 modules. © 2023 COSPARArticle Citation - WoS: 4Citation - Scopus: 5Breakthrough Curve Analysis of Phosphorylated Hazelnut Shell Waste in Column Operation for Continuous Harvesting of Lithium From Water(Elsevier, 2024) Recepoğlu, Yaşar Kemal; Arar, Ozguer; Yuksel, AsliIn batch-scale operations, biosorption employing phosphorylated hazelnut shell waste (FHS) revealed excellent lithium removal and recovery efficiency. Scaling up and implementing packed bed column systems necessitates further design and performance optimization. Lithium biosorption via FHS was investigated utilizing a continuous-flow packed-bed column operated under various flow rates and bed heights to remove Li to ultra-low levels and recover it. The Li biosorption capacity of the FHS column was unaffected by the bed height, however, when the flow rate was increased, the capacity of the FHS column decreased. The breakthrough time, exhaustion time, and uptake capacity of the column bed increased with increasing column bed height, whereas they decreased with increasing influent flow rate. At flow rates of 0.25, 0.5, and 1.0 mL/min, bed volumes (BVs, mL solution/mL biosorbent) at the breakthrough point were found to be 477, 369, and 347, respectively, with the required BVs for total saturation point of 941, 911, and 829, while the total capacity was calculated as 22.29, 20.07, and 17.69 mg Li/g sorbent. In the 1.0, 1.5, and 2.0 cm height columns filled with FHS, the breakthrough times were 282, 366, and 433 min, respectively, whereas the periods required for saturation were 781, 897, and 1033 min. The three conventional breakthrough models of the Thomas, Yoon-Nelson, and Modified Dose-Response (MDR) were used to properly estimate the whole breakthrough behavior of the FHS column and the characteristic model parameters. Li's extremely favorable separation utilizing FHS was evidenced by the steep S-shape of the breakthrough curves for both parameters flow rate and bed height. The reusability of FHS was demonstrated by operating the packed bed column in multi-cycle mode, with no appreciable loss in column performance.Article Citation - WoS: 6Citation - Scopus: 6Inverse Effects of Lanthanide Co-Doping on the Photocatalytic Hydrogen Production and Dye Degradation Activities of Cu Doped Sol-Gel Tio<sub>2</Sub>(Elsevier, 2023) Yurtsever, Husnu Arda; Erzin, Kubilay; Ciftcioglu, Muhsin; Yurtsever, Hüsnü Arda; Erzin, Kubilay; Çiftçioğlu, MuhsinCopper doped and lanthanide-copper co-doped titania powders were prepared by sol-gel technique and the effects of co-doping on the photocatalytic reduction and oxidation activities of titania were investigated in this work. Characterization studies indicated that a reduced structure was formed due to the presence of Ti3+ species in copper doped titania powder and a more stable structure was formed when lanthanides were used as co-dopants. Copper doped powder had a significantly higher activity in photocatalytic hydrogen production (1037 mu mol/g/h) than the co-doped powders (similar to 400 mu mol/g/h). The oxidation activities of co-doped powders however were determined to be about 2 times higher than that of the copper doped powder. The decrease in the reduction activity was attributed to the decrease in the number of Ti3+ sites, whereas the increase in oxidation activity was probably a result of the increase in the surface area and dye adsorption due to lanthanide co-doping.Article Citation - WoS: 7Citation - Scopus: 8Compositional, Microstructural and Mechanical Effects of Nacl Porogens in Brushite Cement Scaffolds(Elsevier, 2021) Şahin, Erdem; Çiftçioğlu, MuhsinModification of the setting process of brushite cements by varying the concentration of ions that alter calcium phosphate crystallization kinetics, is known to enable control on the monetite conversion extent and the accompanying microporosity. This is useful because monetite serves as a suitable matrix in macroporous scaffolds due to its higher phase stability and finer crystal morphology compared to its hydrous counterpart brushite. In this study the synergistic effect of NaCl and citric acid on the microstructural evolution of brushite cement was demonstrated and microporosity of macroporous monetite-rich cement blocks was minimized by a variable NaCl porogen size distribution approach. Initially, maximum packing ratio of various combinations of NaCl size groups in PEG were determined by their rheological analysis in a range between 57% and 69%. Statistical analysis revealed a positive correlation between the amounts of NaCl particles under 38 mu m and 212 mu m and the maximum packing ratio. Further broadening the size distributions of NaCl porogens with fine cement precursors was effective in increasing the solids packing ratio of cement blocks more than the maximum packing ratio for the porogens. This improvement in packing was accompanied by a reduction in microporosity despite the increase in micropore volume with ion induced monetite formation. The detrimental effect of the microporosity introduced to the structure during monetite formation was balanced for some size distributions and not so much for others, thereby resulting in a wide range of porosities and mechanical properties. Thus, the exponential dependence of mechanical properties on porosity and the mechanical properties of monetite-rich macroporous blocks at the theoretical zero-porosity were determined according to Rice's model. Zero-porosity extrapolations were much higher than those predicted for brushite cement, contrary to the common assumption that brushite is mechanically stronger than monetite.Article Citation - WoS: 8Citation - Scopus: 11The Effect of Protein Bsa on the Stability of Lipophilic Drug (docetaxel)-Loaded Polymeric Micelles(Elsevier, 2021) Polat, Hürriyet; Çevik Eren, Merve; Polat, MehmetPolymeric micelles are promising delivery vehicles for improving the efficacy of anticancer drugs and reducing their side effects. However, considering the binding ability of serum albumin, the possible interaction of micelles with the native plasma components in the bloodstream raises serious questions on micellar stability. The stability of barren or drug-loaded copolymeric micelles was investigated systematically in distilled water (DW) and simulated body fluid (SBF) solutions in the presence of a model protein. The copolymer was a Pluronic® series triblock copolymer (P-123), the drug was strongly lipophilic docetaxel (DOC) and the protein was Bovine Serum Albumin (BSA). The effect of such factors as BSA and DOC concentrations and the aging of the micellar solutions was studied. Both the barren and drug-loaded micelles were quite stable in blank DW and SBF solutions for long times up to 10 days. They lost integrity and showed no inclination to re-assemble when the BSA concentration reached a critical value, which was very close to the plasma Human Serum Albumin (HSA) concentration. The presence of DOC in the micellar cores could not prevent disintegration. The results illustrate clearly that ensuring the stability of polymeric micelles in blood plasma should be an important design factor in their use as drug carriers.Article Citation - WoS: 4Citation - Scopus: 4Optical and Photocatalytic Properties of Zno and Zns Structures Formed as Controlled Calcination Products of L-Cysteine Assisted Aqueous Precipitation(Elsevier, 2020) Şen, Selin; Top, AybenZnO and ZnS structures were obtained by the calcination of the aqueous precipitation products of Zn(NO3)2, NaOH and L-cysteine (Cys). Initial Cys:Zn molar ratios were changed as 0.1:1, 0.5:1, 1:1 and 1.5:1. All the precursors were transformed into ZnO upon calcination at 700 °C. ZnS structures were obtained by calcining the precursors prepared at the Cys:Zn ratios of 1 and 1.5 at 350 °C. In addition to changing chemical composition of the precipitation products, calcination temperature and initial Cys:Zn ratio also affected morphology, surface area, photoluminescence and photocatalytic properties of the final products. Free exciton energy values of the ZnO samples were observed to be between 3.29 eV and 3.35 eV. PL spectra of the ZnO samples indicated blue and green emission centers. Zinc interstitials (Zni), revealed by the blue emissions in the PL spectra were also confirmed by Auger Zn L3M4.5M4.5 spectra. The samples calcined at 350 °C removed rhodamine B mainly by adsorption. All the samples calcined at 700 °C successfully degraded the dye under UV light. Among the samples calcined at 700 °C, ZnO sample prepared at Cys:Zn = 0.5, which has the highest surface area and unique photoluminescence spectrum exhibited the fastest photodegradation rate. © 2020 Elsevier LtdArticle Citation - WoS: 23Citation - Scopus: 27Use of Deep Eutectic Solvents in the Enzyme Catalysed Production of Ethyl Lactate(Elsevier, 2019) Arıkaya, Azime; Ünlü, Ayşe Ezgi; Takaç, SerpilThe use of deep eutectic solvents (DESs) in the lipase-catalysed esterification of lactic acid with ethanol was explored by screening several DESs. Choline chloride:glycerol (1:2) was the most effective DES and provided 28.7% yield of ethyl lactate under the following conditions: 10% (v/v) of water content in DES, 3 M of initial lactic acid concentration, 5 M of initial ethanol concentration, 30 mg/mL of enzyme concentration, 50 degrees C temperature and 200 rpm agitation rate. Individual and combined effects of the reaction medium components on the enzyme activity were investigated and it was discovered that DES stimulated the enzyme activity while reactants inhibited it. A kinetic model that obeys the Ping-Pong Bi-Bi mechanism with ethanol inhibition was suggested. The kinetics parameters were determined as r(max) = 0.401 mol/L h, the Michaelis constants K-A = 1.657 mol/L and K-B = 0.799 mol/L, the inhibition constant K-iB = 0.156 mol/L. The model reasonably predicted the experimental data. The activation energy was found to be 43.28 kJ/mol. Mass transfer limitations in the reaction medium were negligible. The results are promising for further studies that will research on the use of green solvents in enzyme catalysed lactic acid esterification reactions.Correction Corrigendum To “use of Deep Eutectic Solvents in the Enzyme Catalysed Production of Ethyl Lactate” [process Biochem. 84 (2019) 53–59](Elsevier, 2019) Arıkaya, Azime; Ünlü, Ayşe Ezgi; Takac, Serpil[No abstract available]Article Citation - Scopus: 8Biofuel Production From Nannochloropsis Oculata Microalgae in Seawater Without Harvesting and Dewatering Over Alumina-Silicate Supported Nickel Catalysts(Elsevier, 2018) Deliismail, Özgün; Özdoğru, Bertan; Şeker, ErolThe aim of this work was to study the production of biofuels from marine Nannochloropsis oculata without harvesting and dewatering over the single step sol-gel made alumina-silicate supported nickel catalysts at 80 °C and 1.0 atm. Sulfuric acid, hydrochloric acid, and nitric acid were used in the sol-gel to study the effect of acid type on catalyst activities. The catalyst made using sulfuric acid resulted in 74% microalgae conversion as compared to the catalysts made with other acids. Treatment of this catalyst with ~35 g of NaCl per kg of water at 80 °C and 1.0 atm for 24 h increased microalgae conversion to 91.5% under the same reaction condition and the bio-fuels ranging from mono/polysaccharides, polyols to esters and fatty acids were produced. This study showed that nickel and 25.1 ?mol/g of total acidity and acidic strength having 130–380 °C of temperature range was necessary to achieve 91.5% conversion. © 2018 Elsevier LtdArticle Citation - WoS: 13Citation - Scopus: 15Analysis of Dilution Induced Disintegration of Micellar Drug Carriers in the Presence of Inter and Intra Micellar Species(Elsevier, 2020) Polat, Hürriyet; Kutluay, Gülistan; Polat, MehmetMicelles of self-assembling polymeric surfactant molecules are promising nanoscopic carriers for lipophilic and toxic drugs, genes, and imaging molecules. Though it is a must for successful transport, ensuring micelle integrity is a challenge during intravenous injection where micelles must endure abrupt dilutional effects and encounters with native molecules. Therefore, direct observational evidence of how micelles behave during dilution is valuable in manipulating the designs of these carriers for a succesful drug delivery. Morphology and stability of the barren and a drug-loaded (lipophilic probucol) micelles of a polymeric surfactant (Pluronic® P123) were monitored during systematic re-dilution in distilled water and simulated body fluid in the presence of a model protein (bovine serum albumin). It was observed through surface tension, dynamic light scattering, laser velocimetry, transmission scanning and transmission electron microscopy, and atomic force microscopy analyses that the micelles disintegrated to various degrees in all cases upon dilution. The results indicate that dilution effects must be taken into account in designing micellar drug carriers. The assistance of some other means of protection such as encapsulation should be considered for ensuring micelle integrity within the bloodstream. © 2020 Elsevier B.V.