Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
5 results
Search Results
Article Effects of Reactor Pressure and Inlet Temperature on N-butane/Dimethyl Ether Oxidation and the Formation Pathways of the Aromatic Species(John Wiley and Sons Inc., 2016) Bekat, Tuğçe; İnal, FikretOxidation of n-butane/dimethyl ether (DME)/O2/Ar system was studied by chemical kinetic modeling in a tubular reactor operated adiabatically and at constant pressure. Effects of the reactor pressure on the formation of various major, minor, and trace oxidation products were investigated for two different pressures (1 and 5 atm) and at six different inlet temperature values (700, 800, 900, 1100, 1300, and 1500 K). The analysis was carried out for two different concentrations of dimethyl ether in the inlet fuel mixture (20 and 50 mol %). Higher pressure (5 atm) resulted in higher mole fractions of methane, vinylacetylene, and cyclopentadiene; and lower mole fractions of formaldehyde, acetylene, acetaldehyde, ethane, propargyl, and propane. The mole fractions of CO and CO2 were not affected considerably by the pressure change. The main formation routes of benzene were developed at two different inlet temperature values (1100 and 1300 K), and the main precursors participating in these routes were found to be propargyl, propene, and diacetylene. A skeletal mechanism was developed for the oxidation of n-butane/DME mixture from the detailed mechanism by reduction of the elementary reactions by 79%, and it was tested for accuracy by comparison with the data from the literature.Article Citation - WoS: 48Citation - Scopus: 58Micro-Encapsulation of Ozonated Red Pepper Seed Oil With Antimicrobial Activity and Application To Nonwoven Fabric(John Wiley and Sons Inc., 2013) Özyıldız, Figen; Karagönlü, S.; Başal, Güldemet; Uzel, Ataç; Bayraktar, OğuzIn recent years, functional fabrics possessing antimicrobial activity have drawn significant interest because antibiotic resistance is becoming widespread among pathogenic micro-organisms. The aim of this study was to produce microcapsules incorporating ozonated red pepper seed oil (ORPSO) with antimicrobial properties and apply them to nonwoven fabrics to prepare functional textiles. Red pepper seed oil (RPSO) was ozonated and micro-encapsulated via a complex coacervation method using gelatin (GE) and gum arabic (GA) as wall materials. While micro-encapsulation yield and oil loading decreased with increases in the amount of surfactant, the mean particle size increased. The antimicrobial activity of the oil was tested via the disc diffusion method. The microcapsules were also tested using the agar well method. While RPSO had no effect on the test micro-organisms, the ORPSO and microcapsules containing ORPSO were found to be active against the test micro-organisms. The microcapsules were then applied to nonwoven fabric using the padding method to produce a disposable functional textile. The microcapsule-impregnated functional fabrics provided a 5 log decrease in 1 h. It is therefore possible to functionalize nonwoven fabrics to have antimicrobial activity against antibiotic-resistant micro-organisms, using microcapsules containing ORPSO.Article Citation - WoS: 24Citation - Scopus: 25Atmospheric Concentrations and Phase Partitioning of Polycyclic Aromatic Hydrocarbons in Izmir, Turkey(John Wiley and Sons Inc., 2011) Demircioğlu, Eylem; Sofuoğlu, Aysun; Odabaşı, MustafaAmbient air polycyclic aromatic hydrocarbon (PAH) samples were collected at a suburban (n=63) and at an urban site (n=14) in Izmir, Turkey. Average gas-phase total PAH (∑ 14PAH) concentrations were 23.5ngm -3 for suburban and 109.7ngm -3 for urban sites while average particle-phase total PAH concentrations were 12.3 and 34.5ngm -3 for suburban and urban sites, respectively. Higher ambient PAH concentrations were measured in the gas-phase and ∑ 14PAH concentrations were dominated by lower molecular weight PAHs. Multiple linear regression analysis indicated that the meteorological parameters were effective on ambient PAH concentrations. Emission sources of particle-phase PAHs were investigated using a diagnostic plot of fluorene (FLN)/(fluorine+pyrene; PY) versus indeno[1,2,3-cd]PY/(indeno[1,2,3-cd]PY+benzo[g,h,i]perylene) and several diagnostic ratios. These approaches have indicated that traffic emissions (petroleum combustion) were the dominant PAH sources at both sites for summer and winter seasons. Experimental gas-particle partition coefficients (K P) were compared to the predictions of octanol-air (K OA) and soot-air (K SA) partition coefficient models. The correlations between experimental and modeled K P values were significant (r 2=0.79 and 0.94 for suburban and urban sites, respectively, p<0.01). Octanol-based absorptive partitioning model predicted lower partition coefficients especially for relatively volatile PAHs. However, overall there was a relatively good agreement between the measured K P and soot-based model predictions. Ambient air polycyclic aromatic hydrocarbon (PAH) samples were collected at a suburban and at an urban site in Izmir, Turkey. The multiple linear regression analysis indicated that the meteorological parameters were effective on the measured ambient PAH concentrations. The results indicated that traffic emissions were the dominant PAH sources at both sites for summer and winter seasons.Article Citation - WoS: 28Citation - Scopus: 18Artificial Neural Network Prediction of Tropospheric Ozone Concentrations in Istanbul, Turkey(John Wiley and Sons Inc., 2010) İnal, FikretTropospheric (ground-level) ozone has adverse effects on human health and environment. In this study, next day's maximum 1-h average ozone concentrations in Istanbul were predicted using multi-layer perceptron (MLP) type artificial neural networks (ANNs). Nine meteorological parameters and nine air pollutant concentrations were utilized as inputs. The total 578 datasets were divided into three groups: training, cross-validation, and testing. When all the 18 inputs were used, the best performance was obtained with a network containing one hidden layer with 24 neurons. The transfer function was hyperbolic tangent. The correlation coefficient (R), mean absolute error (MAE), root mean squared error (RMSE), and index of agreement or Willmott's Index (d2) for the testing data were 0.90, 8.78 μg/m3, 11.15μg/m3, and 0.95, respectively. Sensitivity analysis has indicated that the persistence information (current day's maximum and average ozone concentrations), NO concentration, average temperature, PM10, maximum temperature, sunshine time, wind direction, and solar radiation were the most important input parameters. The values of R, MAE, RMSE, and d2 did not change considerably for the MLP model using only these nine inputs. The performances of the MLP models were compared with those of regression models (i.e., multiple linear regression and multiple non-linear regression). It has been found that there was no significant difference between the ANN and regression modeling techniques for the forecasting of ozone concentrations in Istanbul. Tropospheric ozone has adverse effects on human health and environment. Here, the next-day's maximum 1-h average ozone concentrations in Istanbul were predicted using multi-layer perceptron type artificial neural networks (MLP-ANNs). The MLP-ANNs were compared to multiple linear and multiple non-linear regression models. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.Article Citation - WoS: 32Citation - Scopus: 32The Effect of Sb Substitution of Cu in Bi1.7pb0.3sr2ca2cu 3-Xsbxoy Superconductors(John Wiley and Sons Inc., 2000) Kocabaş, Kemal; Çiftçioğlu, MuhsinThe effect of partial substitution of Cu in Bi1.7Pb0.3Sr2Ca2Cu 3-xSbxOy at x = 0.0, 0.05, 0.1, 0.15, and 0.2 levels on the electrical and structural properties was investigated in this work. X-ray diffraction analysis shows that these materials have a multiphase structure. Two different types of particles with different morphologies were observed in scanning electron micrographs. The Tc values decreased from 103.5 to 87 K for x = 0.1 Sb substitution level with a subsequent increase to 101 K at x = 0.2.