Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
2 results
Search Results
Conference Object Electrolysis of Alcohols in High Temperature-High Pressure Water(Materials Research Society, 2013) Yüksel, Aslı; Sasaki, Mitsuru; Goto, MotonobuThe design of clean, efficient and environmentally friendly routes that reduce the waste production and fuel emissions of pollutants into the atmosphere, produce clean, affordable, and renewable energy sources to lessen energy consumption and toxicity on the environment, has become a central issue of chemical research both in industry and academia. One of the approaches being used in green chemistry practices is to use water as a solvent and reaction medium where possible. Much of this work deals with liquid water at temperatures exceeding the normal boiling point which is denoted as sub-critical water. Electrochemical reaction, usually operated at atmospheric condition in water, is generally slow, although it has advantages over chemical reaction such as suppression of side reaction by tuning operating conditions. Since sub-critical water (7 MPa and 250 °C) has remarkable properties such as high ion product and low dielectric constant, it could be a suitable reaction media. We have been studying electrolysis of organic compounds in sub-critical water as waste treatment and molecular degradation technologies. Electrolysis in sub-critical water could degrade harmful and thermally stable organic compounds into innocuous compounds such as hydrogen and water. In this research, we focused on the investigation of the electrochemical reactions of alcohols in sub-critical water to evaluate possibility for the selective production of hydrogen and value-added chemicals. Electrochemical reactions were carried out in sub-critical water using a specially designed autoclave made of SS 316 with a volume of 500 mL. For comparison, thermal degradation experiments of alcohols were also conducted without any direct current loading at identical conditions. Here we employed glycerol and 1-butanol as model compounds of alcohols. As a result of 1-butanol experiments, butanal and butyric acid were produced via partial oxidation at 250 °C and by applying 1-3 A of direct current while no oxidation products were observed at the hydrothermal degradation run. As a gaseous product, hydrogen gas was generated according to the electrochemical reaction mechanism. In the case of glycerol experiments, the main gaseous product was hydrogen gas, whereas glycolaldehyde, lactic acid, and formic acid were generated as the main liquid products at 280 °C. Results indicated that greater than 92% of the glycerol could be decomposed under optimum conditions by hydrothermal electrolysis technique. This presented research will help to degrade stable organic materials in an environmentally friendly way and without need for secondary treatment processes. It will also address the need for novel more efficient techniques for the degradation of stable organic compounds in aqueous conditions and it will advance the use of water as a reaction medium in an efficient way without any organic solvent.Conference Object Citation - WoS: 1Citation - Scopus: 1Modification of Surface Morphology of Uhmwpe for Biomedical Implants(Materials Research Society, 2007) Öztarhan, Ahmet; Sokullu Urkaç, Emel; Kaya, Nusret; Yenigül, Mesut; Tıhmınlıoğlu, Funda; Ezdeşir, Ayhan; Zimmerman, Robert; Budak, Satılmış; Muntele, C.; Chhay, Bopha; Ila, Daryush; Oks, Efim; Nikolaev, Alexey; Tek, Zekai; Eltem, RenginUltra High Molecular Weight Polyethylene (UHMWPE) samples were implanted with metal and metal-gas hybrid ions (Ag, Ag+N, C+H, C+H+Ar, Ti+O) by using improved MEVVA Ion implantation technique [1,2]. An extraction voltage of 30 kV and influence of 1017 ions/cm2 were attempted in this experiment, to change their surface morphologies in order to understand the effect of ion implantation on the surface properties of UHMWPEs. Characterizations of the implanted samples with RBS , ATR - FTIR, spectra were compared with the un-implanted ones . Implanted and unimplanted samples were also thermally characterized by TGA and DSC. It was generally observed that C-H bond concentration seemed to be decreasing with ion implantation and the results indicated that the chain structure of UHMWPE were changed and crosslink density and polymer crystallinity were increased compared to unimplanted ones resulting in increased hardness. It was also observed that nano size cracks (approx.10nm) were significantly disappeared after Ag implantation, which also has an improved antibacterial effect. Contact angle measurements showed that wettability of samples increased with ion implantation. Results showed that metal and metal+gas hybrid ion implantation could be an effective way to improve the surface properties of UHMWPE to be used in hip and knee prosthesis.