Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
7 results
Search Results
Article Citation - WoS: 22Citation - Scopus: 23Bioactive Snail Mucus-Slime Extract Loaded Chitosan Scaffolds for Hard Tissue Regeneration: the Effect of Mucoadhesive and Antibacterial Extracts on Physical Characteristics and Bioactivity of Chitosan Matrix(IOP Publishing, 2021) Perpelek, Merve; Tamburacı, Sedef; Aydemir, Selma; Tıhmınlıoğlu, Funda; Baykara, Başak; Karakaşlı, Ahmet; Havıtçıoğlu, HasanBiobased extracts comprise various bioactive components and they are widely used in tissue engineering applications to increase bioactivity as well as physical characteristics of biomaterials. Among animal sources, garden snail Helix aspersa has come into prominence with its antibacterial and regenerative extracts and show potential in tissue regeneration. Thus, in this study, bioactive H. aspersa extracts (slime, mucus) were loaded in chitosan (CHI) matrix to fabricate porous scaffolds for hard tissue regeneration. Physical, chemical properties, antimicrobial activity was determined as well as in vitro bioactivity for bone and cartilage regeneration. Mucus and slime incorporation enhanced mechanical properties and biodegradation rate of CHI matrix. Scanning electron microscopy images showed that the average pore size of the scaffolds decreased with higher extract content. Mucus and slime extracts showed antimicrobial effect on two bacterial strains. In vitro cytotoxicity, osteogenic and chondrogenic activity of the scaffolds were evaluated with Saos-2 and SW1353 cell lines in terms of Alkaline phosphatase activity, biomineralization, GAG, COMP and hydroxyproline content. Cell viability results showed that extracts had a proliferative effect on Saos-2 and SW1353 cells when compared to the control group. Mucus and slime extract loading increased osteogenic and chondrogenic activity. Thus, the bioactive extract loaded CHI scaffolds showed potential for bone and cartilage regeneration with enhanced physical properties and in vitro bioactivity.Article Citation - WoS: 30Citation - Scopus: 37Production and Characterization of a Novel Bilayer Nanocomposite Scaffold Composed of Chitosan/Si-nhap and Zein/Poss Structures for Osteochondral Tissue Regeneration(American Chemical Society, 2019) Tamburacı, Sedef; Çeçen, Berivan; Üstün, Özcan; Ergür, Bekir Uğur; Havıtçıoğlu, Hasan; Tıhmınlıoğlu, FundaOsteochondral tissue is hard to regenerate after injuries or degenerative diseases. Traditional treatments still have disadvantages, such as donor tissue availability, donor site morbidity, implant loss, and limited durability of prosthetics. Thus, recent studies have focused on tissue engineering strategies to regenerate osteochondral defects with different scaffold designs. Scaffolds have been developed from monolayer structures to bilayer scaffolds to repair the cartilage-bone interface and to support each tissue separately. In this study, Si-substituted nanohydroxyapatite particles (Si-nHap) and silica-based POSS nanocages were used as reinforcements in different polymer layers to mimic a cartilage-bone tissue interface. Chitosan and zein, which are widely used biopolymers, are used as polymer layers to mimic the structure. This study reports the development of a bilayer scaffold produced via fabrication of two different nanocomposite layers with different polymer-inorganic composites in order to satisfy the complex and diverse regenerative requirements of osteochondral tissue. The chitosan/Si-nHap microporous layer and the zein/POSS nanofiber layer were designed to mimic a bone-cartilage tissue interface. Bilayer scaffolds were characterized with SEM, compression, swelling, and biodegradation tests to determine morphological, physical, and mechanical properties. The results showed that the bilayer scaffold had a structure composed of microporous and nanofiber layers joined at a continuous interface with appropriate mechanical properties. Furthermore, in vitro cell culture studies have been performed with LDH, proliferation, fluorescence imaging, and ALP activity assays using osteosarcoma and chondrosarcoma cell lines. ALP expression levels provide a good illustration of the improved osteogenic potential of a porous chitosan/Si-nHap layer due to the Si-doped nHap incorporation. Histological data showed that both fiber and porous layers that mimic the cartilage and bone sections exhibit homogeneous cell distribution and matrix formation. Histochemical staining was used to determine the cell proliferation and ECM formation on each layer. In vitro studies indicated that zein-POSS/chitosan/Si-nHap nanocomposite bilayer scaffolds showed promising results for osteochondral regeneration. Copyright © 2019 American Chemical Society.Article Citation - WoS: 23Citation - Scopus: 27Novel Poss Reinforced Chitosan Composite Membranes for Guided Bone Tissue Regeneration(Springer Verlag, 2018) Tamburacı, Sedef; Tıhmınlıoğlu, FundaIn this study, novel composites membranes composed of chitosan matrix and polyhedral oligomeric silsesquioxanes (POSS) were fabricated by solvent casting method. The effect of POSS loading on the mechanical, morphological, chemical, thermal and surface properties, and cytocompatibility of composite membranes were investigated and observed by tensile test, atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), thermal gravimetric analysis (TGA), protein adsorption assay, air/water contact angle analysis and WST-1 respectively. Swelling studies were also performed by water absorption capacity determination. Results showed that incorporation of Octa-TMA POSS® nanofiller to the chitosan matrix increased the surface roughness, protein adsorption and swelling capacity of membranes. The addition of POSS enhanced significantly the ultimate tensile strength and strain at break of the composite membranes up to 3 wt% POSS loaded samples. An increase of about 76% in tensile strength and of strain at break 1.28% was achieved for 3 wt% POSS loaded nanocomposite membranes compared with chitosan membranes. The presence of POSS filler into polymer matrix increased the plasma protein adsorption on the surface. Maximum protein capacity and swelling was obtained for 10 wt% loaded samples. High cell viability results were obtained with indirect extraction of chitosan/POSS composites. Besides, cell proliferation and ALP activity results showed that POSS incorporation significantly increased the ALP activity of Saos-2 cells cultured on chitosan membranes. This novel composite membranes with tunable properties could be considered as a potential candidate for guided bone regeneration applicationsArticle Citation - WoS: 16Citation - Scopus: 19Designing of Spherical Chitosan Nano-Shells With Micellar Cores for Solvation and Safeguarded Delivery of Strongly Lipophilic Drugs(Elsevier Ltd., 2017) Cihan, Esra; Polat, Mehmet; Polat, HürriyetChitosan is a very effective biopolymer for drug delivery purposes due to its biocompatibility, positive charge and exceptionally pH sensitive degradability behavior in an aqueous medium. Nevertheless, its inability for dissolving lipophilic drug active material and the difficulties in controlling the size and shape of the synthesized particles in nanometer range are critical drawbacks in its effective use. In this study, a synthesis procedure which addresses both issues simultaneously is presented. The procedure is based on initial dissolution of lipophilic drug molecules within the hydrophobic cores of the micelles of a bio-compatible block-copolymer by ionic gelation and subsequent formation of a chitosan shell by polymerization around the micellar structures. Well-formed, hollow and perfectly spherical chitosan particles (nano-shells) in the 30–300 nm size range could be successfully manufactured. Characterization by STEM, TEM, AFM, FTIR and DLS, DLS-LDV techniques showed clearly that the drug was successfully incorporated into the chitosan structure. It was demonstrated that the particles enveloped the micelle(s) of a Pluronic copolymer (P-123) whose hydrophobic cores contained a strongly hydrophobic drug Probucol. The chitosan nano-shells are expected to act as an agent protecting the integrity of the drug-loaded micelles in the body fluid while providing a pH sensitive release medium. The drug uptake by the chitosan particles was very high. A very sharp increase in the amount of the drug released with a slight change in the acidity of the medium was an indication of the potential of the manufactured chitosan nano-shells as pH sensitive, target specific delivery vehicles for drug release.Article Citation - WoS: 44Citation - Scopus: 44Chitosan-Polyoxometalate Nanocomposites: Synthesis, Characterization and Application as Antimicrobial Agents(Springer Verlag, 2014) Fiorani, Giulia; Saoncella, Omar; Kaner, P.; Alsoy Altınkaya, Sacide; Figoli, Alberto; Bonchio, Marcella; Carraro, MauroPolyoxometalates (POMs) were used, together with chitosan (CS), to obtain hybrid nanoaggregates. Three representative POMs were efficiently assembled into nanoparticles of few hundred nm diameter, featuring entangled ribbons substructure. In order to establish suitable preparation and stability conditions, the assemblies were characterized in solution by UV-Vis spectroscopy, dynamic light scattering and ζ-potential. The nanoparticles were tested against E. coli (106 CFU/ml) in aqueous solution, showing a synergic activity of the heteropolyacid H5PMo10V2O40 and CS. For such components, a highly porous and antibacterial film was obtained upon lyophilisation of the colloidal mixture.Article Citation - WoS: 53Citation - Scopus: 60Properties of N-Eicosane Silk Fibroin-Chitosan Microcapsules(John Wiley and Sons Inc., 2011) Başal, Güldemet; Şirin Deveci, Senem; Yalçın, Dilek; Bayraktar, OğuzPCM microcapsules containing n-eicosane were prepared by complex coacervation of silk fibroin (SF) and chitosan (CHI). Chemical characterization of microcapsules was carried out using Fourier-transform infrared (FT-IR) spectroscopy. Thermal properties and thermal stability of microencapsulated n-eicosane were determined by differential scanning calorimetry (DSC) and thermal gravimetric analysis (TGA). FTIR spectra confirmed the encapsulation of n-eicosane within the microcapsules. Results from thermal analyses showed that microcapsules consisted of an average of 45.7 wt % n-eicosane, and had a thermal energy storage and release capacity of about 93.04 J/g and 89.68 J/g, respectively.Article Citation - WoS: 25Citation - Scopus: 29Antibacterial Properties of Silk Fibroin/Chitosan Blend Films Loaded With Plant Extract(Korean Fiber Society, 2010) Başal, Güldemet; Altıok, Duygu; Bayraktar, OğuzThe silk fibroin (SF)/chitosan (CHI) blend films were prepared by dissolving them in formic acid. The morphology of the films was examined by scanning electron microscopy (SEM). The roughness of the membranes was determined by atomic force microscopy (AFM). These films were treated with the extracts of Pistacia terebinthus, Pistacia lentiscus, and Hypericum empetrifolium. Folin-Ciocalteu assay was used to determine the amount of total phenols adsorbed on these blend films. The antibacterial properties of films were tested using disc diffusion and turbidity measurement methods against Escherichia coli and Staphylococcus epidermidis. The release of adsorbed phenolics from the film surface resulted in antibacterial properties. © The Korean Fiber Society and Springer Netherlands 2010.