Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
45 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Optimized Lithium(I) Recovery From Geothermal Brine of Germencik, Türkiye, Utilizing an Aminomethyl Phosphonic Acid Chelating Resin(Taylor and Francis Ltd., 2025) Recepoğlu, Y.K.This study investigates the performance of Lewatit TP 260 ion exchange resin for the efficient recovery of lithium (Li(I)) from geothermal water sourced from the Germencik Geothermal Power Plant in Türkiye. A series of batch sorption experiments were performed to evaluate the influence of key parameters, including resin dosage, solution pH, temperature, initial Li(I) concentration, and contact time, on the Li(I) recovery process. The optimal conditions were determined to be a resin dose of 0.5 g per 25 mL of geothermal water, pH in the range of 6–8, and a temperature of 25°C. Under these conditions, the resin achieved a maximum Li(I) recovery rate of 71% from the geothermal water. Sorption isotherms were further analyzed using the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) models. Among these, the Langmuir model provided the best fit (R² = 0.9841), suggesting a maximum sorption capacity (qm) of 4.31 mg/g. Continuous recovery experiments conducted in column mode confirmed the practical applicability of Lewatit TP 260, achieving a total sorption capacity of 0.41 mg Li(I)/mL resin. The findings exhibit the potential of this resin as a viable sorbent for sustainable Li(I) extraction from geothermal brines, supporting the development of green energy technologies and contributing to the circular economy. © 2024 Taylor & Francis Group, LLC.Article Citation - WoS: 3Citation - Scopus: 4Microfluidic-Assisted Preparation of Nano and Microscale Chitosan Based 3d Composite Materials: Comparison With Conventional Methods(Wiley, 2022) Kimna, Ceren; Değer, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, FundaAlthough nanofillers contribute to improved physical characteristics and biological functionalities of polymer-based biomaterials, their dispersion in polymer matrices is still a challenging issue in terms of obtaining consistency for the inherent properties. To tackle this problem, homogenization techniques are applied to disperse the nanofillers in such polymers, however, these methods can cause undesired changes especially in the rheological properties and the physical structure of the biopolymer matrices. Recently, as a novel homogenization technique, microfluidization has been used to homogenize polymer nanocomposites to minimize these limitations. In this study, two different nanocomposite structures as chitosan/montmorillonite (CS/MMT) and chitosan/polyhedral oligomeric silsesquioxane nanocages (CS/POSS) were homogenized with microfluidization and investigated in terms of physical alterations. Furthermore, the effect of microfluidizer technique on material characteristics was compared with conventional homogenization techniques, i.e., ultrasonic bath and sonication in terms of solution, nano – (e.g., hydrodynamic size, drug encapsulation) and macroscopic material characteristics (e.g., porosity, mechanical properties, swelling and thermal degradation). It was found that the microfluidizer homogenization improves the physical characteristics in both nano and macroscale materials: Nanospheres obtained from CS/MMT composites showed enhanced stability, uniform size distribution (<100 nm, PDI: [removed]50%) whereas 3D porous CS/POSS scaffolds showed improved structural uniformity (i.e., homogeneous and interconnected microstructure) and enhanced thermal and mechanical properties. The obtained results indicate that the microfluidizer homogenization ensures a successful nanofiller dispersion in polymer matrices, thereby improving the biomaterial characteristics impressively compared to the sonication methods.Article Citation - WoS: 5Citation - Scopus: 5Novel Biopolymer-Based Hydrogels Obtained Through Crosslinking of Keratose Proteins Using Tetrakis(hydroxymethyl) Phosphonium Chloride(Springer, 2022) Yalçın, Damla; Top, AybenMerino wool obtained from the Karacabey region of Turkey was solubilized using peracetic acid oxidation. The wool and extracted wool proteins (keratose) were characterized using SEM, XRD, TGA, and FTIR analyses. SDS-PAGE result of the keratose indicated diffusive bands were populated between ~ 40 and ~ 55 kDa, corresponding to low-sulfur content α-keratose proteins. Chemically crosslinked hydrogels were prepared using the keratose and tetrakis(hydroxymethyl) phosphonium chloride (THPC). Storage moduli of the hydrogels prepared at 1:1, 1:2, and 1:4 keratose to THPC reactive group ratios were measured as 63 ± 22, 291 ± 21, and 804 ± 53 Pa, respectively. Crosslinking degrees of the hydrogels also affected the secondary structures of the keratose films obtained from the drying of the hydrogels. The hydrogel with the highest crosslinking density (1:4 gel) exhibited the lowest swelling ratio, whereas the one with the lowest crosslinking density (1:1 gel) disintegrated in deionized water within less than 6 h. CCK-8 tests using L929 mouse fibroblast cells showed that all the hydrogels promoted cell proliferation. These results suggest THPC crosslinked hydrogels prepared at the millimolar THPC concentrations are biocompatible scaffolds, which can be utilized in drug delivery and tissue engineering applications. Graphical abstract: [Figure not available: see fulltext.]Article Citation - WoS: 7Citation - Scopus: 11Hydrophobic Deep Eutectic Solvent Effect on Acrylic Acid Separation From Aqueous Media by Using Reactive Extraction and Modeling With Response Surface Methodology(Taylor & Francis, 2022) Lalikoğlu, Melisa; Aşçı, Yavuz Selim; Sırma Tarım, Burcu; Yıldız, Mahmut; Arat, RefikHydrophobic deep eutectic solvents (HDES) are new-generation green solvents that have emerged in recent years. In this study, the efficiency of using HDES as a solvent in separating acrylic acid from its aqueous solution by reactive extraction method was investigated. As a solvent, HDES prepared with a mixture of TOPO and menthol has been used for the recovery of acrylic acid for the first time. Physical properties of HDES mixtures such as density, viscosity, and refractive index were determined. In reactive extraction experiments, TOPO, one of the two basic components in the solvent, was also employed as an extractant. With the help of response surface methodology based on Box-Behnken design, the effect of the parameters of amount of extractant (0.1–0.9 g), Menthol/TOPO molar ratio (2–4), and initial acid concentration (3–9%) on the distribution coefficient was investigated and the model equation was formed. The highest distribution coefficient (D = 7.8) was achieved with the molar ratio of Menthol/TOPO is 2. Upon examining all the results obtained, it was seen that more than 90% of acrylic acid could be extracted from the aqueous phase to the organic phase.Article Payne Cell Gravimetric Measurements in Polymer-Solvent Systems for Diffusion Coefficients and Isotherm Data(Wiley, 2021) Zielinski, John M.; Garcia, Armando R.; Alsoy Altınkaya, SacideThe discussion focuses on the application of a Payne cell to the measurement of diffusion and solubility coefficients in polymer/solvent systems. Payne cells have, thus far, been used exclusively to measure steady-state permeation rates of solvents. An analytical model has been developed to describe transient gravimetric sorption and desorption measurements performed with a Payne cell. The model has been validated by a complementary numerical simulation and has been applied to evaluate diffusion and solubility coefficients in two different toluene-silicone rubber systems. The data measured using the Payne cell are found to compare very well with diffusion coefficient and isotherm data measured by traditional gravimetric sorption experiments.Article Citation - WoS: 26Citation - Scopus: 28Osteoconductive 3d Porous Composite Scaffold From Regenerated Cellulose and Cuttlebone-Derived Hydroxyapatite(SAGE Publications Inc., 2019) Palaveniene, Alisa; Tamburacı, Sedef; Kimna, Ceren; Glambaite, Kristina; Baniukaitiene, Odeta; Tıhmınlıoğlu, Funda; Liesiene, JolantaRecently, usage of marine-derived materials in biomedical field has come into prominence due to their promising characteristics such as biocompatibility, low immunogenicity and wide accessibility. Among these marine sources, cuttlebone has been used as a valuable component with its trace elemental composition in traditional medicine. Recent studies have focused on the use of cuttlebone as a bioactive agent for tissue engineering applications. In this study, hydroxyapatite particles were obtained by hydrothermal synthesis of cuttlebone and incorporated to cellulose scaffolds to fabricate an osteoconductive composite scaffold for bone regeneration. Elemental analysis of raw cuttlebone material from different coastal zones and cuttlebone-derived HAp showed that various macro-, micro- and trace elements - Ca, P, Na, Mg, Cu, Sr, Cl, K, S, Br, Fe and Zn were found in a very similar amount. Moreover, biologically unfavorable heavy metals, such as Ag, Cd, Pb or V, were not detected in any cuttlebone specimen. Carbonated hydroxyapatite particle was further synthesized from cuttlebone microparticles via hydrothermal treatment and used as a mineral filler for the preparation of cellulose-based composite scaffolds. Interconnected highly porous structure of the scaffolds was confirmed by micro-computed tomography. The mean pore size of the scaffolds was 510 mu m with a porosity of 85%. The scaffolds were mechanically characterized with a compression test and cuttlebone-derived HAp incorporation enhanced the mechanical properties of cellulose scaffolds. In vitro cell culture studies indicated that MG-63 cells proliferated well on scaffolds. In addition, cuttlebone-derived hydroxyapatite significantly induced the ALP activity and osteocalcin secretion. Besides, HAp incorporation increased the surface mineralization which is the major step for bone tissue regeneration.Article Citation - WoS: 64Citation - Scopus: 78Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites(Springer Verlag, 2020) Başalp, Dildare; Tıhmınlıoğlu, Funda; Sofuoğlu, Sait Cemil; İnal, Fikret; Sofuoğlu, AysunIn this study, Wood Plastic Composites (WPCs) were produced from post-consumer bulky wastes of recycled plastic and wood in order to minimize waste, decrease environmental effects of plastics, reserve natural resources, and support circular economy for sustainable production and consumption. Five different types of polypropylene (PP) or polyethylene (PE) based recycled plastics and wood obtained from urban household bulky wastes were used in the production of recycled WPC composites, r-WPCs. Virgin WPC (v-WPC) and r-WPC compounds were prepared with wood flour (WF) and maleic anhydride grafted compatibilizer (MAPP or MAPE) to evaluate the effect of recycled polymer type and compatibilizer on the mechanical properties. It was found that tensile strength properties of r-WPCs produced from recycled PP (r-PP) were higher than that of the r-WPCs produced from mixed polyolefins and recycled PE. r-WPCs containing anti-oxidants, UV stabilizers, and compatibilizer with different WF compositions were produced from only recycled garden fraction PP (PPFGF) to determine the optimum composition and processing temperature for pilot scale manufacturing of r-WPCs. Based on tensile, impact, flexural, and water sorption properties of r-WPC compounds with different formulations, the optimum conditions of r-WPC compounds for industrial manufacturing process were determined. Surface morphology of fractured surfaces as well as tensile, flexural and density results of r-WPC compounds revealed the enhancement effect of MAPP on interfacial adhesion in r-WPCs. r-WPC products (crates and table/chair legs) based on bulky wastes were produced using an injection molding process at industrial scale by using 30 wt% WF-filled r-WPC compound. This study demonstrated that r-WPC compounds from recycled bulky plastic and wood wastes can be used as a potential raw material in plastic as well as WPC industry, contributing to circular economy. GraphicArticle Citation - WoS: 5Citation - Scopus: 6Development of an Optical Tyrosinase Biosensor (tca) for Detection of “parathion-Methyl”(Emerald Group Publishing Ltd., 2019) Polatoğlu, İlker; Çakıcıoğlu Özkan, FehimePurpose: This paper aims to present a novel and cost-effective optical biosensor design by simple preparation method for detection of “parathion-methyl,” which is a model pesticide pose to public health and the environment. Design/methodology/approach: The optical enzyme biosensor (TCA) for detection of pesticide “parathion-methyl” was developed on the basis of immobilization of tyrosinase enzyme on chitosan film by adsorption technique. The analytic performance of TCA was investigated by measuring its activity with Ultraviolet (UV) visible spectrophotometer. Findings: Uniform porous network structure and protonated groups of chitosan film provided a microenvironment for tyrosinase immobilization evident from Fourier transform infrared (FTIR) spectroscopy and Atomic Force Microscopy analysis. TCA has a wide linear detection range (0-1.03 µM) with high correlation coefficient and it can detect the parathion-methyl concentration as low as 159 nM by noncompetitive inhibition kinetics. Using the TCA sensor both for ten times and at least 45 days without a significant loss in its activity are the indicators of its good operational and storage stability. Moreover, TCA can be applicable to tap water, providing a promising tool for pesticides detection. Originality/value: This is the first time to use the in situ analytical technique that can improve the performance of optical enzyme sensor provided to control the pesticide residue better with respect to traditional techniques. The effect of organic solvents on the performance of optical enzyme biosensor was investigated. Inhibition kinetic of the solvents rarely encountered in literature was also studied besides the pH and temperature tolerance of the optical biosensor.Article Citation - WoS: 19Citation - Scopus: 29Modeling of an Activated Sludge Process for Effluent Prediction—a Comparative Study Using Anfis and Glm Regression(Springer Verlag, 2018) Araromi, Dauda Olurotimi; Majekodunmi, Olukayode Titus; Adeniran, Jamiu Adetayo; Salawudeen, Taofeeq OlalekanIn this paper, nonlinear system identification of the activated sludge process in an industrial wastewater treatment plant was completed using adaptive neuro-fuzzy inference system (ANFIS) and generalized linear model (GLM) regression. Predictive models of the effluent chemical and 5-day biochemical oxygen demands were developed from measured past inputs and outputs. From a set of candidates, least absolute shrinkage and selection operator (LASSO), and a fuzzy brute-force search were utilized in selecting the best combination of regressors for the GLMs and ANFIS models respectively. Root mean square error (RMSE) and Pearson’s correlation coefficient (R-value) served as metrics in assessing the predicting performance of the models. Contrasted with the GLM predictions, the obtained modeling results show that the ANFIS models provide better predictions of the studied effluent variables. The results of the empirical search for the dominant regressors indicate the models have an enormous potential in the estimation of the time lag before a desired effluent quality can be realized, and preempting process disturbances. Hence, the models can be used in developing a software tool that will facilitate the effective management of the treatment operation.Article Citation - WoS: 10Citation - Scopus: 12Transparent block copolymer thin films for protection of optical elements via chemical vapor deposition(Elsevier Ltd, 2018) Karabıyık, Merve; Ebil, ÖzgençIn this study, glycidyl methacrylate and 1H, 1H, 2H, 2H-perfluorodecyl acrylate copolymer p(GMA-co-PFDA) thin-films fabricated via Initiated Chemical Vapor Deposition (iCVD) were investigated as protective coatings on optical BK7 glass substrates and commercial optical filters. Durability tests based on military standards MIL-F-48616 and MIL-C-48497A were performed to evaluate performance of coatings for the protection of surfaces of optical elements. Cross-linked p(GMA-co-PFDA) copolymer coatings successfully passed all durability tests showing excellent mechanical properties and protection against humidity, salt water, swelling in water, and resistance to organic solvents while providing excellent adhesion to substrate. iCVD process enabled fine tuning of film morphology, mechanical properties and hydrophobicity by controlling the process parameters. Fabricated films were hydrophobic and highly transparent (>98%) in the wavelength range from 300 nm to 1000 nm. Optical transmittance measurements before and after coating process proved that while providing chemical and physical protection, p(GMA-co-PFDA) copolymer thin-films do not cause any detectable change in optical performance of commercial narrow band and wide band filters.