Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
2 results
Search Results
Article Citation - WoS: 17Citation - Scopus: 16Synthesis, Characterization and Adsorption Studies of Phosphorylated Cellulose for the Recovery of Lithium From Aqueous Solutions(Editura Acad Romane, 2021) Recepoğlu, Yaşar Kemal; Yüksel, AslıIn this study, pristine cellulose was functionalized by the phosphorylation reaction to make it suitable for lithium separation. After characterization studies of the synthesized adsorbent with SEM, EDX, FTIR, TGA and XPS, the effects of various parameters on the lithium uptake capacity of the adsorbent were examined. The analysis of equilibrium data by several adsorption models showed that maximum adsorption capacity of the adsorbent was found to be 9.60 mg/g at 25 degrees C by the Langmuir model. As initial concentration and contact time increased, adsorption capacity also increased, however, mild temperature (25-35 degrees C) and pH (5-6) were better for the adsorption of lithium. 80% of lithium adsorption within three minutes proved the fast kinetic nature of the adsorbent. A 99.5% desorption efficiency of lithium was achieved with 0.5 M H2SO4, among HCl and NaCl with different molarities. Phosphorylated cellulose was shown to be a favorable adsorbent for the recovery of lithium from aqueous solutions.Article Citation - WoS: 4Citation - Scopus: 5Investigating the Effects of Ultrasonic Energy on the Flotation Behavior of Pyrite and Galena Minerals(Oficyna Wydawnicza Politechniki Wroclawsjiej, 2020) Horasan, Ümit; Tanrıverdi, Mehmet; Çicek, Tayfun; Polat, MehmetAlthough pyrite is one of the more abundant minerals of the earth crust, it has low economic value. When it reports to the concentrate during flotation along with the valuable minerals, it decreases the grade of the valuable minerals and leads to an increase in smelting costs. Numerous modifications have been suggested in the literature to increase the selective recovery of pyrite containing base metal-sulfide ores. The use of ultrasonic applications is one such method. In this study, the effect of the ultrasonic application on the flotation behavior of galena and pyrite mineral was investigated through systematic Hallimond Tube experiments. In the initial phase of the experiments, the optimum flotation conditions (particle size, pH, amount of air, and amount of reagent) were determined for the two minerals. Subsequent experiments were carried out under these optimums to distinguish the effect of the ultrasonic application. The influence of how the ultrasonic application was applied (i.e. before and during the conditioning stage or before the re-flotation of the concentrate) was also studied. It was observed that the ultrasonic application had a strong activating influence if it was administered before or during the conditioning stage. The effect was similar to whether the minerals were floated individually or from their mixtures. However, when it was applied to a flotation concentrate before re-flotation, it selectively displayed a depressant action for the pyrite to the extent that no depressants were needed. The results conclusively showed that the ultrasonic application could drastically improve the selectivity of the complex ores.