Chemical Engineering / Kimya Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/14

Browse

Filters

2010 - 20112

Settings

Subject: search.filters.subject.Composite films

Search Results

Now showing 1 - 2 of 2
  • Article
    Citation - WoS: 10
    Citation - Scopus: 10
    Morphology, Order, Light Transmittance, and Water Vapor Permeability of Aluminum-Coated Polypropylene Zeolite Composite Films
    (John Wiley and Sons Inc., 2011) Balköse, Devrim; Oğuz, Kaan; Özyüzer, Lütfi; Tarı, Süleyman; Arkış, Esen; Özmıhçı Ömürlü, Filiz
    In this study, the polypropylene-zeolite composite films having 2-6 wt % natural zeolite were coated with a thin film of aluminum (Al) by magnetron sputtering, and the contribution of the Al coating on film properties was investigated. The samples were characterized by EDX, X-ray diffraction, SEM, AFM, UV-visible spectroscopy, and water vapor permeation analyses. The surface of the films coated with a smooth Al film having 98-131 nm thickness. EDX revealed that Al percentage on the surface appeared to be as 8-10 wt % indicating contribution of polymer surface under Al film to analysis. XRD analysis showed that the grain size of Al at the surface was 22-29 nm. The surface roughness increased after Al-coating process. The transmission of coated films was very low for both UV and visible regions of the light spectrum. Permeation analysis indicated that water vapor permeation was lower for Al-coated material.
  • Conference Object
    Citation - WoS: 37
    Citation - Scopus: 43
    Preparation and Barrier Properties of Chitosan-Layered Silicate Nanocomposite Films
    (John Wiley and Sons Inc., 2010) Oğuzlu, Hale; Tıhmınlıoğlu, Funda
    In this study, chitosan nanocomposite films were prepared using a solvent-casting method by incorporation of an organically modified montmorillonite (Cloisite 10A). The effect of filler concentration on the water vapor permeability, oxygen permeability, mechanical and thermal properties of the composite films was evaluated. The structure of nanocomposites and the state of intercalation of the clay were characterized by XRD. The water vapor permeability of pure chitosan films was measured as a function of relative humidity (RH). It was found that the permeability value increased with an increase in RH. The water vapor and gas permeability values of the composite films decreased significantly with increasing filler concentration. Permeation data was fitted to various phenomenological models predicting the permeability of polymer systems filled with nanoclays as a function of clay concentration and aspect ratio of nanoplatelets. According to the XRD results, an increase in basal spacing was obtained with respect to pure clay for chitosan/clay nanocomposites. This demonstrated the formation of intercalated structure of clay in the polymer matrix. Tensile strength and elongation at break of the composites increased significantly with the addition of clay, however the thermal and color properties of the films were not much affected by the intercalation of clay into polymer matrix.