Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
3 results
Search Results
Article Citation - WoS: 19Citation - Scopus: 21Microwave Effect on Ion-Exchange and Structure of Clinoptilolite(Springer Verlag, 2007) Akdeniz, Yelda; Ülkü, SemraThe effect of microwave irradiation on the ion exchange degree and structure of clinoptilolite mineral has been examined in comparison with the conventional heat treatment in waterbath. Clinoptilolite-rich mineral from the Western Anatolia, Bigadiç region was used for the experimental study. The mineral was mainly clinoptilolite (80-85%) and additionally, quartz (5-10%), and analcime+mordenite (<5%) were found as co-existing minerals. The mineral was stable towards dehydration and maintains its original structure up to 800°C. The BET and Langmuir surface areas of the sample were found to be 22 and 17m2/g for N2 adsorption and 28 and 22m2/g for Ar adsorption, respectively. For the exchange experiments, clinoptilolite rich mineral was treated with 1N NaCl salt solution both in a microwave unit and waterbath for 10min, 1h and 2h at 80°C. The waterbath treatment with the same conditions was continued for two additional weeks. The chemical composition of the parent and Na-exchanged forms of the clinoptilolite rich minerals were analyzed by using Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES). Microwave treatment was found to be more rapid and effective for ion exchange compared to conventional waterbath treatment. Additionally, the XRD results reveal that microwave irradiation has zero effect on the structure of the clinoptilolite rich mineral.Article Citation - WoS: 30Citation - Scopus: 35Effect of Temperature and Time on Zinc Borate Species Formed From Zinc Oxide and Boric Acid in Aqueous Medium(American Chemical Society, 2007) Eltepe, H. Emre; Balköse, Devrim; Ülkü, SemraThe effect of temperature and time of heating of zinc oxide and boric acid in aqueous medium on product type, dehydration behavior, crystal morphology, and structure was investigated for the production of flame retardant and smoke suppressant zinc borate. Two different products dehydrated at 140 and 350°C were obtained and characterized by thermal gravimetric analysis, X-ray diffraction, energy dispersive spectroscopy, and Fourier transform infrared spectroscopy.Article Citation - WoS: 11Citation - Scopus: 13Liquid-Phase Oxidation of Carvacrol Using Zeolite-Encapsulated Metal Complexes(American Chemical Society, 2006) Güneş, Alev; Bayraktar, Oğuz; Yılmaz, SelahattinWe report here the use of zeolite-encapsulated metal (salpn) complexes as catalysts in the oxidation reaction of the natural compound carvacrol in acetonitrile with hydrogen peroxide as the oxidant. No previous studies on the oxidation of carvacrol in the presence of metal salpn complexes have been reported. By using a general flexible ligand method, Cr(III), Fe(III), Bi(III), Ni(II), and Zn(II) complexes of N,N′-bis(salicylidene)propane1,3-diamine (H2salpn) encapsulated in NaY zeolite were prepared. All catalysts were characterized by Fourier transform infrared (FTIR), X-ray diffraction (XRD), and scanning electron microscopy (SEM) analyses to confirm the complex encapsulation. The activities of all prepared catalysts for the oxidation of carvacrol and hydrogen peroxide were tested. The performances of all catalysts were compared on the basis of the leaching test results and carvacrol conversions. Thymohydroquinone and benzoquinones were observed as byproducts at high conversions of carvacrol. No product was formed in the absence of a catalyst. Fe(salpn)-NaY catalyst exhibited the highest carvacrol conversion of 27.6% with a yield of 22.0%, followed by Cr(salpn)-NaY catalyst with 23.5% carvacrol conversion and a yield of 17.6%. Other catalysts have shown relatively lower performances in terms of carvacrol conversion and leaching. The Cr(salpn)-NaY catalyst was found to be a more efficient catalyst than others on the basis of leaching and activity tests. With the selected catalyst Cr (salpn)-NaY, the effects of temperature and carvacrol/hydrogen peroxide molar ratio on carvacrol oxidation reactions were investigated. Increasing the temperature from 40 to 60 °C caused an increase in the thymoquinone yield from 6.2% to 16.0%. An increase in carvacrol/hydrogen peroxide molar ratio from 1 to 3 resulted in a decrease in the thymoquinone yield.