Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
7 results
Search Results
Now showing 1 - 7 of 7
Article Citation - WoS: 17Citation - Scopus: 16Development of Cissus Quadrangularis-Loaded Poss-Reinforced Chitosan-Based Bilayer Sponges for Wound Healing Applications: Drug Release and in Vitro Bioactivity(American Chemical Society, 2023) Değer Aker, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, FundaNowadays, antibiotic-loaded biomaterials have been widelyusedin wound healing applications. However, the use of natural extractshas come into prominence as an alternative to these antimicrobialagents in the recent period. Among natural sources, Cissus quadrangularis (CQ) herbal extract is usedfor treatment of bone and skin diseases in ayurvedic medicine dueto its antibacterial and anti-inflammatory effects. In this study,chitosan-based bilayer wound dressings were fabricated with electrospinningand freeze-drying techniques. CQ extract-loaded chitosan nanofiberswere coated on chitosan/POSS nanocomposite sponges using an electrospinningmethod. The bilayer sponge is designed to treat exudate wounds whilemimicking the layered structure of skin tissue. Bilayer wound dressingswere investigated with regard to the morphology and physical and mechanicalproperties. In addition, CQ release from bilayer wound dressings and in vitro bioactivity studies were performed to determinethe effect of POSS nanoparticles and CQ extract loading on NIH/3T3and HS2 cells. The morphology of nanofibers was investigated withSEM analysis. Physical characteristics of bilayer wound dressingswere determined with FT-IR analysis, swelling study, open porositydetermination, and mechanical test. The antimicrobial activity ofCQ extract released from bilayer sponges was investigated with a discdiffusion method. Bilayer wound dressings' in vitro bioactivity was examined using cytotoxicity determination, woundhealing assay, proliferation, and the secretion of biomarkers forskin tissue regeneration. The nanofiber layer diameter was obtainedin the range of 77.9-97.4 nm. The water vapor permeabilityof the bilayer dressing was obtained as 4021 to 4609 g/m(2)day, as it is in the ideal range for wound repair. The release ofthe CQ extract over 4 days reached 78-80% cumulative release.The release media were found to be antibacterial against Gram-negativeand Gram-positive bacteria. In vitro studies showedthat both CQ extract and POSS incorporation induced cell proliferationas well as wound healing activity and collagen deposition. As a result,CQ-loaded bilayer CHI-POSS nanocomposites were found as a potentialcandidate for wound healing applications.Article Effects of Span 60 Template and Freeze Drying on Zinc Borate Produced From Zinc Nitrate Hexahydrate and Borax Decahydrate(Taylor and Francis Ltd., 2022) Alp, Burcu; Gönen, Mehmet; Atakul Savrık, Sevdiye; Balköse, DevrimZinc borate is an important additive to polymers and lubricants. The process variables such as reactant concentration, presence of template in precipitating medium and drying method determine the composition and particle size of zinc borates. In the present study, zinc borate precipitate obtained by mixing aqueous zinc nitrate and borax decahydrate solutions was dried either by conventional method or by freeze drying. The products were well characterized by advanced methods. Zinc borate from 1 mol dm(-3) reactants had (2.1 +/- 0.5)x(2.5 +/- 0.5)x(1.3 +/- 0.2) mu m and (0.5 +/- 0.1)x(1.3 +/- 0.1)x(0.028 +/- 0.01) mu m dimensions by conventional and freeze drying respectively. Individual particles smaller in size is obtained since the particles are not agglomerated due to absence of surface tension of liquid water for case of freeze drying. Planar particles agglomerated into 20 to 60 mu m crystals in the presence of template Span 60 in 1 mol dm(-3) reactants for conventional drying. Nano zinc borate particles with primary particle size of (46 +/- 9) nm were obtained by decreasing the reactant concentration to 0.1 mol dm(-3). The primary particle size was decreased to (40 +/- 3) nm by addition of Span 60 to dilute solutions. However zinc borate nanoparticles obtained from dilute solutions adhered to each other forming agglomerates during conventional drying. Their freeze drying would allow formation of a freely flowing nano powder.Article Citation - Scopus: 1Synthesis of Stable Nano Calcite(Turkish Chemical Society, 2018) Kılıç, SevgiSynthesis of calcium carbonate (CaCO3) particles in the presence of a population of carbon dioxide (CO2) bubbles was investigated in the calcium hydroxide (Ca(OH)2) solution, which is a natural stabilizer for CaCO3. Possible chemical speciation reactions were presented for an inorganic synthesis of hollow nano-CaCO3 particles. In the progress of CaCO3 synthesis, some of the particles started to dissolve at their edges and turned into hollow nano-CaCO3 particles. Some of the pores closed at the end of crystallization as a result of dissolution-recrystallization mechanism. Hollow nano-CaCO3 particles with sizes of about 300 nm were synthesized with a narrow size distribution. It was concluded that the hollow nano-CaCO3 particles could be advantageous due to lower weights and higher surface areas.Article Citation - WoS: 23Citation - Scopus: 31Nano-Caco3 Synthesis by Jet Flow(Elsevier Ltd., 2017) Ülkeryıldız, Eda; Kılıç, Sevgi; Özdemir, EkremA new methodology was introduced to produce hollow nano calcite particles in homogenous size distribution without aggregation. The design consisted of a jet flow system in which the crystallization region was separated from the stabilization region. The newly produced nano CaCO3 particles of about 140 nm were removed from the crystallization region as quickly as possible into the stabilization region before aggregation or crystal growth. In the stages of crystallization, the particles started to dissolve from their edges which opened-up the pores inside the particles. At the late stages of crystallization, the open pores closed. These particles were stable in Ca(OH)2 solution and no aggregation was detected. Different particles with different morphologies can be produced by adjusting the stages in the crystallization.Article Citation - Scopus: 1Optical and Surface Properties of Zinc Oxide Nanoparticles Dried by Conventional and Supercritical Ethanol Drying Techniques(Research India Publications, 2014) Egbuchunam, Theresa Obuajulu; Yetgin, Senem; Özmıhçı Ömürlü, Filiz; Balköse, DevrimZinc oxide (ZnO) nanoparticles were synthesized by conventional (ZnO-A) and supercritical ethanol drying (ZnO-B). Nitrogen adsorption/desorption analyses were performed to determine the surface areas of the powders. The specific surface area was 28.30m2/g and 10.61 m2/g for ZnO-A and ZnO-B respectively. The powders adsorbed very small amount of CO2with the conventionally dried powder adsorbing more CO2. Supercritical ethanol dried ZnO had ethanol on its surface which was eliminated by vacuum application at room temperature. Both powders had OH groups which were eliminated on heating up to 500°C under vacuum. However, OH groups were present in lower amounts in supercritical ethanol dried ZnO. The powders were characterized by UV-VIS optical absorption and room temperature photoluminescence spectroscopic analyses. The UV-VIS absorption spectrum showed an absorption band at 375nm due to ZnO nanoparticles. The photoluminescence spectrum of ZnO excited at 380nm exhibited three emission peaks: one at 424nm and 490nm corresponding to band gap excitonic emission and another located at 520nm due to the presence of singly ionized oxygen vacancies.Article Citation - WoS: 44Citation - Scopus: 44Chitosan-Polyoxometalate Nanocomposites: Synthesis, Characterization and Application as Antimicrobial Agents(Springer Verlag, 2014) Fiorani, Giulia; Saoncella, Omar; Kaner, P.; Alsoy Altınkaya, Sacide; Figoli, Alberto; Bonchio, Marcella; Carraro, MauroPolyoxometalates (POMs) were used, together with chitosan (CS), to obtain hybrid nanoaggregates. Three representative POMs were efficiently assembled into nanoparticles of few hundred nm diameter, featuring entangled ribbons substructure. In order to establish suitable preparation and stability conditions, the assemblies were characterized in solution by UV-Vis spectroscopy, dynamic light scattering and ζ-potential. The nanoparticles were tested against E. coli (106 CFU/ml) in aqueous solution, showing a synergic activity of the heteropolyacid H5PMo10V2O40 and CS. For such components, a highly porous and antibacterial film was obtained upon lyophilisation of the colloidal mixture.Article Citation - WoS: 53Citation - Scopus: 60Supercritical Deposition of Pt on Sno2-Coated Al2o3 Foams: Phase Behaviour and Catalytic Performance(Elsevier Ltd., 2008) Garrido, G. Incera; Patcas, F. C.; Upper, G.; Türk, M.; Yılmaz, Selahattin; Kraushaar-Czarnetzki, B.Deposition and reduction of an organometallic platinum complex from a supercritical Pt(COD)Me2/CO2 solution was carried out to produce Pt/SnO2 catalysts supported on Al2O3 foams for CO oxidation at moderate temperatures. The phase behaviour of the complex in supercritical carbon dioxide was investigated to find the optimum pressure and temperature conditions for the deposition. For the Pt(COD)Me2/CO2 mixture, the melting point decreased with increasing pressure from 378 K at 0.1 MPa to 360 K at 25.6 MPa. Additional investigations showed that the solubility of Pt(COD)Me2 in CO2 increases from 5.9 × 10-4 mol/mol at 11.2 MPa and 313 K to 3.4 × 10-3 mol/mol at 29.6 MPa and 353 K. The supercritical deposition yielded catalysts with highly dispersed platinum nanoparticles of approx. 3 nm having a narrow size distribution and thus, a superior activity towards oxidation of carbon monoxide in comparison to a catalyst prepared by the conventional aqueous impregnation of Pt.