Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
4 results
Search Results
Now showing 1 - 4 of 4
Article Mini modular plant design for ethylene production using Martian atmosphere on Mars(Elsevier, 2024) Deliismail, Özgün; Şeker, ErolA main shift in the competitive landscape of technology development is in 3D printing of complex articles made of variety of materials due to faster manufacturing and less human error in the production. In fact, it seems to be a viable candidate for the construction of structures for terrestrial and extraterrestrial life in future. Thus, new or damaged equipment in space explorations could be replaced instantly, and habitats could be manufactured using 3D printing in varying gravitational fields in the solar system. Among 3D printing materials, HDPE is commonly used in the projects, such as a prototype manufacturing or pipes or damp-proof membrane. This study initially focused on the preliminary design of the self-sustaining mini ethylene production plant from Martian atmosphere with scale-out architecture. UniSIM® was integrated with MATLAB® via CAPE-OPEN extension to design mini-ethylene production plant at low gravity. Ethylene capacity was found as 17.71 tons/year for 100 modules. © 2023 COSPARArticle Citation - WoS: 4Citation - Scopus: 5Antifouling Polydopamine-Modified Poly (ether Sulfone) Membrane Immobilized With Alumina-Calcium Oxide Catalyst for Continuous Biodiesel Production(Elsevier, 2023) Güngörmüş, Elif; Şeker, Erol; Alsoy Altınkaya, SacideBiodiesel is an alternative biofuel that can be blended with conventional petroleum-derived diesel fuel to partly reduce the dependence on the imported oil. Catalytic membrane reactors are promising candidates for sustainable biodiesel production. Herein, we report a novel catalytically active polydopamine-modified poly (ether sulfone) (PES) membrane immobilized with an alumina-calcium oxide catalyst. The reaction temperature, butanol to canola oil ratio, and transmembrane pressure applied through the membrane were optimized with response surface methodology and Box-Behnken design. In contrast to all previous catalytic membrane studies for biodiesel production, we used butanol as a co-reactant to improve the winter problems of biodiesel made with methanol. FTIR and SEM-EDX analysis confirmed the successful immobilization of the catalyst. At the end of 30 days of storage in the reactant mixture, 95% of the catalyst loaded to the membrane was still on the surface, and biodiesel yield values and butanol flux of the membrane did not change. We compared the batch and flowthrough operation modes by measuring the catalytic activity of membranes under static and dynamic conditions within 24 h (8-cycle). The biodiesel yield under dynamic condition decreased in the first three cycles from 54.54 +/- 0.65% to 47.31 +/- 0.70% and then stayed constant, whereas a continuous decrease from 25.42 +/- 0.57% to 17.19 +/- 0.58% was observed under static condition. In each cycle, the equilibrium limitation for the yield was overcome only when the membrane was operated under pressure. The main reason for the decrease in catalytic activities was the fouling on the catalyst surface which was quickly removed by backwashing with butanol. It is concluded that catalytic membranes with antifouling properties and alcohol stability can make biodiesel production more cost-effective and environmentally friendly.Article Citation - WoS: 35Citation - Scopus: 38Ethyl Esters Biodiesel Production From Spirulina Sp. and Nannochloropsis Oculata Microalgal Lipids Over Alumina-Calcium Oxide Catalyst(Elsevier, 2020) Türkkul, Berk; Deliismail, Özgün; Şeker, ErolIn this study, we present the ethyl esters biodiesel production from Nannochloropsis oculata and Spirulina sp. microalgal lipids on 60 wt% CaO on Al2O3 catalyst at 50 degrees C and 1.0 atm. The activity of the catalyst was studied as a function of ethanol:lipid molar ratios, catalyst amounts and reaction times. It was found that 6 wt% of the lipids as catalyst amount resulted in 59% biodiesel yield in 30 min at 12 of ethanol:lipid molar ratio whereas 90-99% biodiesel yield was obtained at 24 and 48 of ethanol:lipid molar ratios. In order to achieve 90-99% yields, the basic strength was found to be weak and to be in the form of bi-carbonate, whereas high basicity was not necessary. Besides, pure CaO and Al2O3 were not active under the same reaction conditions. We found that the glycerolysis of triacylglyceride occurred in series with the reverse of the transesterification of the triacylglyceride when the catalyst amount was 6 wt% of the lipids and the ethanol:lipid molar ratio was 24 and 48 and the reaction time was 60 min. (C) 2019 Elsevier Ltd. All rights reserved.Article Citation - Scopus: 8Biofuel Production From Nannochloropsis Oculata Microalgae in Seawater Without Harvesting and Dewatering Over Alumina-Silicate Supported Nickel Catalysts(Elsevier, 2018) Deliismail, Özgün; Özdoğru, Bertan; Şeker, ErolThe aim of this work was to study the production of biofuels from marine Nannochloropsis oculata without harvesting and dewatering over the single step sol-gel made alumina-silicate supported nickel catalysts at 80 °C and 1.0 atm. Sulfuric acid, hydrochloric acid, and nitric acid were used in the sol-gel to study the effect of acid type on catalyst activities. The catalyst made using sulfuric acid resulted in 74% microalgae conversion as compared to the catalysts made with other acids. Treatment of this catalyst with ~35 g of NaCl per kg of water at 80 °C and 1.0 atm for 24 h increased microalgae conversion to 91.5% under the same reaction condition and the bio-fuels ranging from mono/polysaccharides, polyols to esters and fatty acids were produced. This study showed that nickel and 25.1 ?mol/g of total acidity and acidic strength having 130–380 °C of temperature range was necessary to achieve 91.5% conversion. © 2018 Elsevier Ltd