Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
2 results
Search Results
Now showing 1 - 2 of 2
Article Citation - WoS: 64Citation - Scopus: 78Utilization of Municipal Plastic and Wood Waste in Industrial Manufacturing of Wood Plastic Composites(Springer Verlag, 2020) Başalp, Dildare; Tıhmınlıoğlu, Funda; Sofuoğlu, Sait Cemil; İnal, Fikret; Sofuoğlu, AysunIn this study, Wood Plastic Composites (WPCs) were produced from post-consumer bulky wastes of recycled plastic and wood in order to minimize waste, decrease environmental effects of plastics, reserve natural resources, and support circular economy for sustainable production and consumption. Five different types of polypropylene (PP) or polyethylene (PE) based recycled plastics and wood obtained from urban household bulky wastes were used in the production of recycled WPC composites, r-WPCs. Virgin WPC (v-WPC) and r-WPC compounds were prepared with wood flour (WF) and maleic anhydride grafted compatibilizer (MAPP or MAPE) to evaluate the effect of recycled polymer type and compatibilizer on the mechanical properties. It was found that tensile strength properties of r-WPCs produced from recycled PP (r-PP) were higher than that of the r-WPCs produced from mixed polyolefins and recycled PE. r-WPCs containing anti-oxidants, UV stabilizers, and compatibilizer with different WF compositions were produced from only recycled garden fraction PP (PPFGF) to determine the optimum composition and processing temperature for pilot scale manufacturing of r-WPCs. Based on tensile, impact, flexural, and water sorption properties of r-WPC compounds with different formulations, the optimum conditions of r-WPC compounds for industrial manufacturing process were determined. Surface morphology of fractured surfaces as well as tensile, flexural and density results of r-WPC compounds revealed the enhancement effect of MAPP on interfacial adhesion in r-WPCs. r-WPC products (crates and table/chair legs) based on bulky wastes were produced using an injection molding process at industrial scale by using 30 wt% WF-filled r-WPC compound. This study demonstrated that r-WPC compounds from recycled bulky plastic and wood wastes can be used as a potential raw material in plastic as well as WPC industry, contributing to circular economy. GraphicArticle Citation - WoS: 24Citation - Scopus: 25Atmospheric Concentrations and Phase Partitioning of Polycyclic Aromatic Hydrocarbons in Izmir, Turkey(John Wiley and Sons Inc., 2011) Demircioğlu, Eylem; Sofuoğlu, Aysun; Odabaşı, MustafaAmbient air polycyclic aromatic hydrocarbon (PAH) samples were collected at a suburban (n=63) and at an urban site (n=14) in Izmir, Turkey. Average gas-phase total PAH (∑ 14PAH) concentrations were 23.5ngm -3 for suburban and 109.7ngm -3 for urban sites while average particle-phase total PAH concentrations were 12.3 and 34.5ngm -3 for suburban and urban sites, respectively. Higher ambient PAH concentrations were measured in the gas-phase and ∑ 14PAH concentrations were dominated by lower molecular weight PAHs. Multiple linear regression analysis indicated that the meteorological parameters were effective on ambient PAH concentrations. Emission sources of particle-phase PAHs were investigated using a diagnostic plot of fluorene (FLN)/(fluorine+pyrene; PY) versus indeno[1,2,3-cd]PY/(indeno[1,2,3-cd]PY+benzo[g,h,i]perylene) and several diagnostic ratios. These approaches have indicated that traffic emissions (petroleum combustion) were the dominant PAH sources at both sites for summer and winter seasons. Experimental gas-particle partition coefficients (K P) were compared to the predictions of octanol-air (K OA) and soot-air (K SA) partition coefficient models. The correlations between experimental and modeled K P values were significant (r 2=0.79 and 0.94 for suburban and urban sites, respectively, p<0.01). Octanol-based absorptive partitioning model predicted lower partition coefficients especially for relatively volatile PAHs. However, overall there was a relatively good agreement between the measured K P and soot-based model predictions. Ambient air polycyclic aromatic hydrocarbon (PAH) samples were collected at a suburban and at an urban site in Izmir, Turkey. The multiple linear regression analysis indicated that the meteorological parameters were effective on the measured ambient PAH concentrations. The results indicated that traffic emissions were the dominant PAH sources at both sites for summer and winter seasons.