Chemical Engineering / Kimya Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/14

Browse

Filters

2019 - 201912020 - 20235

Settings

Author: search.filters.author.Tamburacı, SedefScopus Q: search.filters.scopusQuartile.Q1

Search Results

Now showing 1 - 6 of 6
  • Review
    Citation - WoS: 39
    Citation - Scopus: 37
    Engineered Liposomes in Interventional Theranostics of Solid Tumors
    (American Chemical Society, 2023) Kommineni, Nagavendra; Chaudhari, Ruchita; Conde, Joao; Cecen, Berivan; Chandra, Pranjal; Prasad, Rajendra; Tamburacı, Sedef
    Engineered liposomal nanoparticles have unique characteristicsas cargo carriers in cancer care and therapeutics. Liposomal theranosticshave shown significant progress in preclinical and clinical cancermodels in the past few years. Liposomal hybrid systems have not onlybeen approved by the FDA but have also reached the market level. Nanosizedliposomes are clinically proven systems for delivering multiple therapeuticas well as imaging agents to the target sites in (i) cancer theranosticsof solid tumors, (ii) image-guided therapeutics, and (iii) combinationtherapeutic applications. The choice of diagnostics and therapeuticscan intervene in the theranostics property of the engineered system.However, integrating imaging and therapeutics probes within lipidself-assembly liposome may compromise their overalltheranostics performance. On the other hand, liposomal systems sufferfrom their fragile nature, site-selective tumor targeting, specificbiodistribution and premature leakage of loaded cargo molecules beforereaching the target site. Various engineering approaches, viz., grafting,conjugation, encapsulations, etc., have been investigated to overcomethe aforementioned issues. It has been studied that surface-engineeredliposomes demonstrate better tumor selectivity and improved therapeuticactivity and retention in cells/or solid tumors. It should be notedthat several other parameters like reproducibility, stability, smoothcirculation, toxicity of vital organs, patient compliance, etc. mustbe addressed before using liposomal theranostics agents in solid tumorsor clinical models. Herein, we have reviewed the importance and challengesof liposomal medicines in targeted cancer theranostics with theirpreclinical and clinical progress and a translational overview.
  • Article
    Citation - WoS: 17
    Citation - Scopus: 16
    Development of Cissus Quadrangularis-Loaded Poss-Reinforced Chitosan-Based Bilayer Sponges for Wound Healing Applications: Drug Release and in Vitro Bioactivity
    (American Chemical Society, 2023) Değer Aker, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, Funda
    Nowadays, antibiotic-loaded biomaterials have been widelyusedin wound healing applications. However, the use of natural extractshas come into prominence as an alternative to these antimicrobialagents in the recent period. Among natural sources, Cissus quadrangularis (CQ) herbal extract is usedfor treatment of bone and skin diseases in ayurvedic medicine dueto its antibacterial and anti-inflammatory effects. In this study,chitosan-based bilayer wound dressings were fabricated with electrospinningand freeze-drying techniques. CQ extract-loaded chitosan nanofiberswere coated on chitosan/POSS nanocomposite sponges using an electrospinningmethod. The bilayer sponge is designed to treat exudate wounds whilemimicking the layered structure of skin tissue. Bilayer wound dressingswere investigated with regard to the morphology and physical and mechanicalproperties. In addition, CQ release from bilayer wound dressings and in vitro bioactivity studies were performed to determinethe effect of POSS nanoparticles and CQ extract loading on NIH/3T3and HS2 cells. The morphology of nanofibers was investigated withSEM analysis. Physical characteristics of bilayer wound dressingswere determined with FT-IR analysis, swelling study, open porositydetermination, and mechanical test. The antimicrobial activity ofCQ extract released from bilayer sponges was investigated with a discdiffusion method. Bilayer wound dressings' in vitro bioactivity was examined using cytotoxicity determination, woundhealing assay, proliferation, and the secretion of biomarkers forskin tissue regeneration. The nanofiber layer diameter was obtainedin the range of 77.9-97.4 nm. The water vapor permeabilityof the bilayer dressing was obtained as 4021 to 4609 g/m(2)day, as it is in the ideal range for wound repair. The release ofthe CQ extract over 4 days reached 78-80% cumulative release.The release media were found to be antibacterial against Gram-negativeand Gram-positive bacteria. In vitro studies showedthat both CQ extract and POSS incorporation induced cell proliferationas well as wound healing activity and collagen deposition. As a result,CQ-loaded bilayer CHI-POSS nanocomposites were found as a potentialcandidate for wound healing applications.
  • Article
    Citation - WoS: 22
    Citation - Scopus: 23
    Multi-Organs for Testing Small-Molecule Drugs: Challenges and Perspectives
    (MDPI, 2021) Çeçen, Berivan; Karavasili, Christina; Nazir, Mubashir; Bhusal, Anant; Doğan, Elvan; Shahriyari, Fatemeh; Tamburacı, Sedef; Miri, Amir K.
    Organ-on-a-chip technology has been used in testing small-molecule drugs for screening potential therapeutics and regulatory protocols. The technology is expected to boost the development of novel therapies and accelerate the discovery of drug combinations in the coming years. This has led to the development of multi-organ-on-a-chip (MOC) for recapitulating various organs involved in the drug–body interactions. In this review, we discuss the current MOCs used in screening small-molecule drugs and then focus on the dynamic process of drug absorption, distribution, metabolism, and excretion. We also address appropriate materials used for MOCs at low cost and scale-up capacity suitable for high-performance analysis of drugs and commercial high-throughput screening platforms. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
  • Article
    Citation - WoS: 54
    Citation - Scopus: 64
    Bioactive Fish Scale Incorporated Chitosan Biocomposite Scaffolds for Bone Tissue Engineering
    (Elsevier Ltd., 2019) Kara, Aylin; Tamburacı, Sedef; Tıhmınlıoğlu, Funda; Havıtçıoğlu, Hasan
    Recently, biologically active natural macromolecules have come into prominence to be used as potential materials in scaffold design due to their unique characteristics which can mimic the human tissue structure with their physical and chemical similarity. Among them, fish scale (FS) is a biologically active material with its structural similarity to bone tissue due to including type I collagen and hydroxyapatite and also have distinctive collagen arrangement. In the present study, it is aimed to design a novel composite scaffold with FS incorporation into chitosan (CH) matrix for bone tissue regeneration. Therefore, two biological macromolecules, fish scale and chitosan, were combined to produce bio-composite scaffold. First, FS were decellularized with the chemical method and disrupted physically as microparticles (100 in), followed by dispersal in CH with ultrasonic homogenisation, CH/FS scaffolds were fabricated by lyophilization technique. Scaffolds were characterized physically, chemically, mechanically, and morphologically. SEM and porosity results showed that CH/FS scaffolds have uniform pore structure showing high porosity. Mechanical properties and degradation rate are enhanced with increasing FS content. In vitro cytotoxicity, proliferation and osteogenic activity of the scaffolds were evaluated with SaOS-2 cell line. CH/FS scaffolds did not show any cytotoxicity effect and the cells were gradually proliferated during culture period. Cell viability results showed that, FS microparticles had a proliferative effect on SaOS-2 cells when compared to control group. ALP activity and biomineralization studies indicated that FS micro particle reinforcement increased osteogenic activity during culture period. As a biological macromolecule with unique characteristics, FS was found as cytocompatible and provided promising effects as reinforcement agents for polymeric scaffolds. In conclusion, fabricated CH/FS bio-composites showed potential for bone tissue engineering applications. (C) 2019 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 46
    Citation - Scopus: 53
    Chitosan-Hybrid Poss Nanocomposites for Bone Regeneration: the Effect of Poss Nanocage on Surface, Morphology, Structure and in Vitro Bioactivity
    (Elsevier, 2020) Tamburacı, Sedef; Tıhmınlıoğlu, Funda
    POSS, regarded as the smallest silica particle, is widely used as nanofiller in polymer systems. POSS-based nanocomposites are deduced as novel materials having potency for biomedical applications owing to the enhanced biocompatibility and physicochemical characteristics. The aim of this work was to integrate the beneficial features of chitosan (CS) and OctaTMA-POSS nanoparticle to design nanocomposite for bone tissue regeneration. The nanocomposite scaffolds were fabricated by freeze-drying. The effects of POSS incorporation on morphology and structure of CS matrix were examined. Bioactivity and osteogenic effects of the POSS nanoparticles were investigated with cytocompatibility, cell proliferation, alkaline phosphatase activity, osteocalcin production and biomineralization assays. PUSS incorporation altered the surface morphology by increasing surface roughness. Nanocomposite scaffolds with 82-90% porosity exhibited an increase in compression modulus of scaffolds (78-107 kPa) compared to control CS group (56 kPa). Results indicated that CS-POSS scaffolds were found cytocompatible with 3T3, MG-63 and Saos-2 cell lines. POSS incorporation showed promising effects on osteoblast adhesion and proliferation as well as increasing ALP activity, octeocalcin secretion and biomineralization of cells. (C) 2019 Elsevier B.V. All rights reserved.
  • Article
    Citation - WoS: 23
    Citation - Scopus: 26
    The Effect of Biomimetic Coating and Cuttlebone Microparticle Reinforcement on the Osteoconductive Properties of Cellulose-Based Scaffolds
    (Elsevier, 2020) Palaveniene, Alisa; Songailiene, Kristina; Baniukaitiene, Odeta; Tamburacı, Sedef; Kimna, Ceren; Tıhmınlıoğlu, Funda; Liesiene, Jolanta
    Polymer-based scaffolds have already gained popularity in many biomedical applications due to convenient routes for fabrication and favourable structural, physicochemical and functional characteristics. However, polymeric scaffolds lack osteoconductivity and some synthetic polymers carry the risk of inflammatory response caused by degradation by-products. Those facts limit their practical use in bone tissue engineering. In this study, three-dimensional (3D) porous scaffolds from naturally derived polymer, namely regenerated cellulose, were prepared using a non-hydrolytic sol-gel and lyophilization techniques. To induce osteoconductive properties of the polymeric scaffolds, cuttlebone microparticles were immobilized and the surface coating was achieved via in vitro mineralization using 10-fold concentrated simulated body fluid (10x SBF). Biogenic activity of cuttlebone is explained by its chemical composition, which includes polysaccharide beta-chitin and macro-, micro- and trace elements favourable for mineralization. Parallel the scaffolds were examined during long-term (24 weeks) in vitro mineralization in 1x SBF for the purpose to investigate apatite-forming ability of the scaffolds. A nice cauliflower-like structures and needle-like dents of the spherical aggregates, which are characteristic to hydroxyapatite precursors, were observed on the surface of cellulose/cuttlebone scaffolds by SEM. 10x SBF coating enhanced cell attachment to the scaffolds because SBF elements are known to increase bioactivity by inducing re-deposition of carbonate apatite crystallites on scaffold surface. Additionally, calcium and phosphate depositions were clearly observed on the developed scaffolds using von Kossa and Alizarin Red S staining. Proliferative and osteoconductive effects on the osteoblast-like MG-63 cells demonstrate the cellulose/cuttlebone scaffolds soaked in 10x SBF as a favourable material for bone tissue engineering. (C) 2019 Elsevier B.V. All rights reserved.