Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
3 results
Search Results
Now showing 1 - 3 of 3
Article Citation - WoS: 3Citation - Scopus: 4Microfluidic-Assisted Preparation of Nano and Microscale Chitosan Based 3d Composite Materials: Comparison With Conventional Methods(Wiley, 2022) Kimna, Ceren; Değer, Sibel; Tamburacı, Sedef; Tıhmınlıoğlu, FundaAlthough nanofillers contribute to improved physical characteristics and biological functionalities of polymer-based biomaterials, their dispersion in polymer matrices is still a challenging issue in terms of obtaining consistency for the inherent properties. To tackle this problem, homogenization techniques are applied to disperse the nanofillers in such polymers, however, these methods can cause undesired changes especially in the rheological properties and the physical structure of the biopolymer matrices. Recently, as a novel homogenization technique, microfluidization has been used to homogenize polymer nanocomposites to minimize these limitations. In this study, two different nanocomposite structures as chitosan/montmorillonite (CS/MMT) and chitosan/polyhedral oligomeric silsesquioxane nanocages (CS/POSS) were homogenized with microfluidization and investigated in terms of physical alterations. Furthermore, the effect of microfluidizer technique on material characteristics was compared with conventional homogenization techniques, i.e., ultrasonic bath and sonication in terms of solution, nano – (e.g., hydrodynamic size, drug encapsulation) and macroscopic material characteristics (e.g., porosity, mechanical properties, swelling and thermal degradation). It was found that the microfluidizer homogenization improves the physical characteristics in both nano and macroscale materials: Nanospheres obtained from CS/MMT composites showed enhanced stability, uniform size distribution (<100 nm, PDI: [removed]50%) whereas 3D porous CS/POSS scaffolds showed improved structural uniformity (i.e., homogeneous and interconnected microstructure) and enhanced thermal and mechanical properties. The obtained results indicate that the microfluidizer homogenization ensures a successful nanofiller dispersion in polymer matrices, thereby improving the biomaterial characteristics impressively compared to the sonication methods.Article Citation - WoS: 25Citation - Scopus: 33Novel Phytochemical Cissus Quadrangularis Extract-Loaded Chitosan/Na-carboxymethyl Cellulose-Based Scaffolds for Bone Regeneration(SAGE Publications, 2018) Tamburacı, Sedef; Kimna, Ceren; Tıhmınlıoğlu, FundaMedicinal plants are attracting considerable interest as a potential therapeutic agent for bone tissue regeneration. Cissus quadrangularis L. is also a medicinal plant known with its osteogenic activity. In this study, a phytochemical scaffold was produced by incorporating Cissus quadrangularis with chitosan/Na-carboxymethyl cellulose blend by lyophilization technique. The effect of Cissus quadrangularis loading on the mechanical, morphological, chemical, and degradation properties as well as in vitro cytotoxicity, cell proliferation, and differentiation of the composites was investigated. Scanning electron microscopy images showed that porous Cissus quadrangularis-loaded scaffolds were obtained with an average pore size of 148-209 mu m which is appropriate for bone regeneration. Cissus quadrangularis incorporation enhanced the compression modulus of scaffolds from 76 to 654 kPa. In vitro cell culture results indicated that Cissus quadrangularis/chitosan/Na-carboxymethyl cellulose scaffolds provided a favorable substrate for the osteoblast adhesion, proliferation, and mineralization. Results supported the osteoinductive property of the Cissus quadrangularis extract-incorporated scaffolds even without osteogenic media supplement. Cissus quadrangularis extract increased the alkaline phosphatase activity of the SaOS-2 cells on scaffolds on 7th and 14th days of incubation. The investigation of characterization and cell culture studies suggest that Cissus quadrangularis-loaded osteoinductive Cissus quadrangularis/chitosan/Na-carboxymethyl cellulose scaffold can serve as a potential biomaterial for bone tissue engineering applications.Article Citation - WoS: 26Citation - Scopus: 28Osteoconductive 3d Porous Composite Scaffold From Regenerated Cellulose and Cuttlebone-Derived Hydroxyapatite(SAGE Publications Inc., 2019) Palaveniene, Alisa; Tamburacı, Sedef; Kimna, Ceren; Glambaite, Kristina; Baniukaitiene, Odeta; Tıhmınlıoğlu, Funda; Liesiene, JolantaRecently, usage of marine-derived materials in biomedical field has come into prominence due to their promising characteristics such as biocompatibility, low immunogenicity and wide accessibility. Among these marine sources, cuttlebone has been used as a valuable component with its trace elemental composition in traditional medicine. Recent studies have focused on the use of cuttlebone as a bioactive agent for tissue engineering applications. In this study, hydroxyapatite particles were obtained by hydrothermal synthesis of cuttlebone and incorporated to cellulose scaffolds to fabricate an osteoconductive composite scaffold for bone regeneration. Elemental analysis of raw cuttlebone material from different coastal zones and cuttlebone-derived HAp showed that various macro-, micro- and trace elements - Ca, P, Na, Mg, Cu, Sr, Cl, K, S, Br, Fe and Zn were found in a very similar amount. Moreover, biologically unfavorable heavy metals, such as Ag, Cd, Pb or V, were not detected in any cuttlebone specimen. Carbonated hydroxyapatite particle was further synthesized from cuttlebone microparticles via hydrothermal treatment and used as a mineral filler for the preparation of cellulose-based composite scaffolds. Interconnected highly porous structure of the scaffolds was confirmed by micro-computed tomography. The mean pore size of the scaffolds was 510 mu m with a porosity of 85%. The scaffolds were mechanically characterized with a compression test and cuttlebone-derived HAp incorporation enhanced the mechanical properties of cellulose scaffolds. In vitro cell culture studies indicated that MG-63 cells proliferated well on scaffolds. In addition, cuttlebone-derived hydroxyapatite significantly induced the ALP activity and osteocalcin secretion. Besides, HAp incorporation increased the surface mineralization which is the major step for bone tissue regeneration.