Chemical Engineering / Kimya Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/14
Browse
11 results
Search Results
Now showing 1 - 10 of 11
Article Citation - WoS: 31Citation - Scopus: 34Insights Into Engineered Graphitic Carbon Nitride Quantum Dots for Hazardous Contaminants Degradation in Wastewater(Elsevier, 2023) Gören, Ayşegül Yağmur; Recepoğlu, Yaşar Kemal; Vatanpour, Vahid; Yoon, Yeojoon; Khataee, AlirezaIncreased environmental pollution is a critical issue that must be addressed. Photocatalytic, adsorption, and membrane filtration methods are suitable in environmental governance because of their high selectivity, low cost, environment-friendly nature, and excellent treatment efficiency. Graphitic carbon nitride (g-C3N4) quantum dots (QDs) have been considered as photocatalysts, adsorbents, and membrane materials for wastewater treatments, owing to their stability, adsorption capacity, photochemical properties, and low toxicity and cost. This review summarizes g-C3N4 QD synthesis techniques, operating parameters affecting the removal performance in the treatment process, modification effects with other semiconductors, and benefits and drawbacks of g-C3N4 QD-based materials. Furthermore, this review discusses the practical applications of g-C3N4 QDs as adsorbents, photocatalysts, and membrane materials for organic and inorganic contaminant treatments and their value-added product formation potential. Modified g-C3N4 QD-based material adsorbents, photocatalysts, and membranes present potentially applicable effects, such as removal of most waterborne contaminants. Excellent results were obtained for the reduction of methyl orange, bisphenol A, tetracycline, ciprofloxacin, phenol, rhodamine B, E. coli, and Hg. Overall, this paper provides comprehensive background on g-C3N4 QD-based materials and their diverse applications in wastewater treatment, and it presents a foundation for the enhancement of similar unique materials in the future.Article Citation - WoS: 16Citation - Scopus: 13Energy storage performance of nitrogen-doped reduced graphene oxide/co-doped polyaniline nanocomposites(Springer, 2022) Altınışık, Hasan; Getiren, Bengü; Çıplak, Zafer; Soysal, Furkan; Yıldız, NurayThe design and exploration of carbon-based electrode materials have become highly significant for developing supercapacitor technology, which has attracted considerable attention in energy storage systems. Here, nitrogen-doped reduced graphene oxide (N-rGO) – Polyaniline (PANI) nanocomposites were synthesized by a facile two-step method in which in situ polymerization of aniline monomer was performed on hydrothermally synthesized N-rGO nanosheets in DBSA and H2SO4 medium for co-doping of PANI chains. The effects of various acid concentrations (DBSA:H2SO4 0.5 − 0.25:1 n/n) and N-rGO:aniline ratios (N-rGO:aniline 1:4–10 m/m) used in the preparation of the electrode material on the capacitive properties were investigated. It is found that the co-doped N-rGO-PANI nanocomposites exhibit a high specific capacitance of 346.3 F g− 1 at 1 A g− 1, remarkable rate capacity (99.9%, 1–10 A g− 1) and excellent cycle stability at 5 A g− 1 (81.3%, 5000 cycles) in a two-electrode system. As a result, constructing co-doped PANI chains and N-doped rGO provided a viable and simple way to improve the capacitive performances of supercapacitors.Article Citation - WoS: 6Citation - Scopus: 7Designing Robust Xylan/Chitosan Composite Shells Around Drug-Loaded Msns: Stability in Upper Git and Degradation in the Colon Microbiota(Elsevier, 2023) Zeybek, Nüket; Büyükkileci, Ali Oğuz; Güleç, Şükrü; Polat, Mehmet; Polat, Hürriyetong residence times, near-neutral pH values, and release triggered by the enzymatic action of the resident microbiota offer unique opportunities for improved drug delivery in the colon. The fact that a delivery agent must also pass through the complete GI tract without degradation presents a challenge due to widely changing pH conditions. In this study, a promising colon-targeted drug delivery system was composed of a xylan/chitosan composite shell formed on curcumin-loaded mesoporous silica nanoparticles (MSNs). A novel synthesis approach was employed to facilitate precipitation of negatively charged xylan on negatively charged MSNs by concurrent chitosan polymerization. Curcumin-loaded xylan/chitosan-coated MSNs (C-MSNs) were determined to contain nearly 42% xylan by the inclusion of chitosan in a one-to-one ratio with xylan. The xylan/chitosan composite shell demonstrated excellent stability in the acidic upper GI tract. The hydrolysis of glycosidic bonds by resident microbiota was the triggering mechanism for xylan degradation and curcumin release in the colon. The presence of xylan has the further benefit of increasing the number of beneficial bacteria and improving short-chain fatty acid production for improved colon health.Article Citation - WoS: 9Citation - Scopus: 9Hollow Nano-caco3's Voc Sensing Properties: a Dft Calculation and Experimental Assessments(Elsevier, 2023) Bayram, Abdullah; Farzaneh, Amir; Esrafili, Mehdi D.; Okur, Salih; Özdemir, EkremAir is the most critical and necessary for life, and air quality significantly impacts people's health. Both indoor and outdoor pollution frequently contain volatile organic compounds (VOCs). Such contaminants provide immediate or long-term health risks to the living system. The present study investigates sorption characteristics of VOCs on hollow nano calcite (CaCO3) particles with 250 nm and 40 nm pore sizes to remove from the air ambient using the quartz crystal microbalance (QCM) technique at room temperature both experimentally and theoretically. The results were supported by density functional theory (DFT), and adsorption-desorption characteristics were studied with Langmuir adsorption isotherms. The QCM measurements showed a stable signal without having hysteresis, and the response of polar VOCs on hollow nano-CaCO3 particles such as ethanol, propanol, and humidity with higher polarity was less compared to solvents such as chloroform and dichloromethane, which revealed that the surfaces of CaCO3 particles have mostly non-polar properties. CaCO3 surface and VOC molecule interactions overlap with the Langmuir model. With DFT calculations, VOC and water molecule adsorption changes the CaCO3 Egap. Our findings show that the ΔEgap values increase as chloroform > dichloromethane > propanol > ethanol > water. This order suggests that the sensing response of the hollow CaCO3 structure is linearly proportional to the adsorption energies of VOC and water. The linear adsorption characteristics, high sensing response, and short recovery time illustrated that the newly synthesized nano-CaCO3 could be implemented as a new VOC adsorbent material for health, environmental sustainability, and in vitro microbiome cultures.Article Citation - WoS: 1Citation - Scopus: 2A New-Generation Poly (ether Imide Sulfone) Based Solvent Resistant Ultrafiltration Membrane for a Sustainable Production of Silica Nanopowder(Elsevier, 2023) Güngörmüş, Elif; Alsoy Altınkaya, SacideThe work presented here demonstrated the feasibility of using a membrane to improve the sustainability of silica nanopowder production. Due to superior chemical resistance, high thermal-oxidative stability, and good processability, poly (ether imide sulfone) has been used for membrane production and modified with amine-functionalized TiO2 nanoparticles. The membrane demonstrated good long-term leaching stability in 40% ethanol and silica synthesis solution and maintained its permeability and rejection characteristics under static and dynamic conditions. Additionally, the high antifouling property of the membrane allowed recovering 99.5% of the nanoparticles. Backwashing with water resulted in a high flux recovery ratio (>93%), and gravity-settling without energy can easily separate silica nanoparticles and water in the backwashing solution. Compared to classical freeze-drying and oven-drying methods, integrating membrane into silica nanopowder production can reduce energy consumption by a factor of 81 and 53. At the same time, the utility cost can be saved by 80% and 69%. Additionally, the solvent and catalyst recovered in the permeate stream can be reused in the synthesis, reducing disposal and purchasing costs. In conclusion, membrane-assisted nanopowder production can minimize the adverse effects caused by commonly used conventional drying methods and make the process more sustainable and environmentally friendly.Article Citation - WoS: 12Citation - Scopus: 14Extraction of Monophenols and Fractionation of Depolymerized Lignin Oil With Nanofiltration Membranes(Elsevier, 2023) Croes, Tim; Dutta, Abhishek; De Bie, Robin; Van Aelst, Korneel; Sels, Bert; Van der Bruggen, BartOrganic solvent nanofiltration membranes were employed to fractionate birch derived reductive catalytic fractionated (RCF) lignin oil. This lignin oil is highly depolymerized, with most, if not all chemical compounds lighter than 3 kDa. Sixteen commercially available membranes were investigated for the fractionation, in combination with methanol and ethyl acetate as solvents. Membrane performances were quantified using Gaussian fits of gel permeation chromatograms and separation factor calculations. The separation factor was found to be primarily based on affinities instead of size-exclusion. The silicon-based membranes from Borsig (Germany) and PuraMem S600 from Evonik (UK) proved best at separating lignin into different functional fractions, showing monomer separation factors up to 7.4 and providing a permeate fraction with 88 % phenolic monomer purity. These membranes were further examined in batch diafiltration and two-stage filtration. This increased the separation factor from 7.4 to 25.4, and the monomer purity of the permeate to 95 %, proving that membrane purification of the lignin-derived monophenols is technically feasible.Article Citation - WoS: 7Citation - Scopus: 7Epoxidation of Soybean Oil Over Titanium or Niobium Incorporated Sba-15 and Sulfated Lanthanum Titania Silicate Catalysts(Elsevier, 2022) Kalkandelen, Mustafa; Yılmaz, SelahattinMesoporous heterogeneous catalysts were synthesized to develop environmentally benign catalysts for soybean oil's (Glycine max) epoxidation. The investigated materials were sulfated lanthanum doped titania silica xerogel (SO4/La-TiO2-SiO2), and Ti and Nb incorporated SBA-15 with two different silica/metal molar ratios of 10 and 20. Soybean oil epoxidation reactions were performed in tert-butanol by utilizing H2O2 as oxidant at 75 °C for 6 h. Product analysis was carried out by H NMR, FTIR, and analytical methods. Nb-SBA-15 catalysts yielded better conversion than Ti-SBA-15 catalysts owing to their high acidity. However, epoxide selectivity was found low for both catalyst groups due to water in the medium that promoted side reactions. Tert-butanol and ethyl acetate were studied as solvents, but employing ethyl acetate in the reactions triggered catalysts aggregation and deposition on the reactor surface. Stability tests indicated the robustness of Ti and Nb against leaching, whereas sulfur leaching was noted with SO4/La-TiO2-SiO2 catalyst. The most active Nb-SBA-15 (10) catalyst was also applied in the epoxidation of soybean-derived fatty acid methyl esters (FAME). The results showed that small-sized FAME molecules did not enhance the reaction rate. Reusability tests indicated that Nb-SBA-15 (10) was active in epoxidation for at least three cycles.Article Citation - WoS: 7Citation - Scopus: 7Synthesis and Characterization of Single-Walled Carbon Nanotube: Cyto-Genotoxicity in Allium Cepa Root Tips and Molecular Docking Studies(Wiley, 2022) İnce Yardımcı, Atike; İstifli, Erman Salih; Açıkbaş, Yaser; Liman, Recep; Yağmurcukardeş, Nesli; Yılmaz, Selahattin; Ciğerci, İbrahim HakkıHerein, single-walled carbon nanotubes (SWCNTs) were synthesized by the thermal chemical vapor deposition (CVD) method, and characterized by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), transmission electron microscopy (TEM), Raman spectroscopy, dynamic light scattering (DLS), and thermo-gravimetric analysis (TGA). The results indicated that obtained nanotubes were SWCNTs with high crystallinity and their average diameter was 10.15 ± 3 nm. Allium cepa ana–telophase and comet assays on the root meristem were employed to evaluate the cytotoxic and genotoxic effects of SWCNTs by examining mitotic phases, mitotic index (MI), chromosomal aberrations (CAs), and DNA damage. A. cepa root tip cells were exposed to SWCNTs at concentrations of 12.5, 25, 50, and 100 μg/ml for 4 h. Distilled water and methyl methanesulfonate (MMS, 10 μg/ml) were used as the negative and positive control groups, respectively. It was observed that MIs decreased statistically significantly for all applied doses. Besides, CAs such as chromosome laggards, disturbed anaphase–telophase, stickiness and bridges and also DNA damage increased in the presence of SWCNTs in a concentration-dependent manner. In the molecular docking study, the SWCNT were found to be a strong DNA major groove binder showing an energetically very favorable binding free energy of −21.27 kcal/mol. Furthermore, the SWCNT interacted effectively with the nucleotides on both strands of DNA primarily via hydrophobic π and electrostatic interactions. As a result, cytotoxic and genotoxic effects of SWCNTs in A. cepa root meristematic cells which is a reliable system for assessment of nanoparticle toxicology were demonstrated in this study.Article Citation - WoS: 13Citation - Scopus: 12Comparison of Photocatalytic Performances of Solar-Driven Hybrid Catalysts for Hydrogen Energy Evolution From 1,8–diazabicyclo[5.4.0]undec-7 (dbu) Solution(Elsevier, 2022) Orak, Ceren; Yüksel, AslıHydrogen is evolved from 1,8–Diazabicyclo [5.4.0]undec-7-ene (DBU) model solution which is a nitrogen-containing heterocyclic organic compound using different solar-driven hybrid photocatalysts. A characterization study is performed and the results of PL analysis show that the most promising solar-driven hybrid catalyst is graphene supported LaFeO3. Then, an experimental design matrix is built using the Box Behnken model to main and interaction effects of reaction parameters (pH, catalyst loading, and [H2O2]0). Based on the experimental results relatively higher hydrogen amounts are achieved using GLFO and this finding is supported by PL analysis. The highest hydrogen amount and DBU removal are determined as 3058.31 μmol/gcat and 90.3%, respectively. Statistical analysis shows that the square of catalyst loading is the only effective parameter over the produced hydrogen amount from the DBU model solution using GLFO and the R2 of model is 92.47%. Thus, hydrogen production and wastewater treatment could be achieved via photocatalytic oxidation as concomitant.Article Citation - WoS: 8Citation - Scopus: 11Brine Minimization in Desalination of the Geothermal Reinjection Fluid by Pressure-Driven Membrane Separation Processes(Elsevier, 2022) Jarma, Yakubu A.; Karaoğlu, Aslı; Senan, Islam Rashad Ahmed; Baba, Alper; Kabay, NalanBrine obtained during water treatment by pressure driven membrane processes remains the major drawback. Therefore, it is of paramount important to find a lasting solution in order to minimize its production by both nanofiltration (NF) and reverse osmosis (RO) membranes. In this study, an experimental study with the aim of brine minimization during membrane desalination of the geothermal reinjection fluid using a mini-pilot scale membrane test system having spiral wound NF and RO membranes was conducted. The membranes employed for this task were TR-NF and BW30-RO membranes. First, studies with different brine to feed ratios of 1:4, 1:3, 1:2 and 2:3 represented as NF-F2, NF-F3, NF-F4 and NF-F5, respectively were investigated using TR-NF membrane. A control study with no brine recirculation was conducted as well in order to check the effect of brine recirculation on the membrane performance. Secondly, studies with BW30-RO membrane using same brine to feed ratios as in the case of NF membrane studies were carried out. An applied pressure of 15 bar, initial water recovery of 60% and 4 h of experimental time were employed as operational conditions for both NF and RO membrane studies. Based on the results obtained, it was found that the brine recirculation (with a brine to fresh feed ratio of 2:3) has a significant impact on the permeate flux. The product water can be utilized for the agricultural irrigation purposes. Nevertheless, the boron concentration in the product water was still high for the sensitive crops.