Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
57 results
Search Results
Article Citation - Scopus: 1Audio-magnetotelluric (amt) studies over rajapur hot spring in west coast maharashtra, India(indian Acad Sciences, 2024) Deshmukh, Vasu; Kumar, P. V. Vijaya; Chandrasekaram, D.; Raju, Khasi; Sathishkumar, S.; Srinivas, Y.; Rao, P. B. V. SubbaIn the west coast geothermal provinces, the Rajapur hot spring, located in the southern part of western Maharashtra, is well thought to originate from the interaction of meteoric water with the granitic basement. A 3D AMT survey was conducted to determine the geo-electrical structure of the hot spring. Dimensionality analysis carried out by phase tensor analysis reveals complex subsurface 3D structures. 2D and 3D modelling have yielded three distinct resistivity layers in the Rajapur geothermal field. These layers include a moderately resistive surface layer representing weathered Deccan traps having a thickness of about 100 m, a conductive second layer with a thickness of about 100-400 m represents Kaladgi sediments and a deeper high resistive layer (0.5-1.0 km) representing granitic gneisses basement. High conductivity anomaly within the Kaladgi sediments represents a hydrothermal reservoir that is associated with faults/fractures beneath the Deccan Traps.Article Citation - WoS: 1Citation - Scopus: 1Bioavailability Assessment of the Novel Gsh-Functionalized Feb Nanoparticles Via Oxidative Stress and Trace Element Metabolism in Vitro: Promising Tools for Biomedical Applications(Springer, 2024) Aydemir, Duygu; Aribuga, Dilara; Hashemkhani, Mahshid; Acar, Havva Yagci; Çağıran, Özge Balcı; Ulusu, Nuriye NurayIron-based magnetic nanoparticles (NPs) have attracted significant attention in biomedical research, particularly for applications such as cancer detection and therapy, targeted drug delivery, magnetic resonance imaging (MRI), and hyperthermia. This study focuses on the synthesis and glutathione (GSH) functionalization of iron boride (FeB) nanoparticles (NPs) for prospective biomedical use. The GSH-functionalized FeB NPs (FeB@GSH) demonstrated ferromagnetic behavior, with a saturation magnetization (Ms) of 45.8 emu/g and low coercivity (Hc = 1000 Oe), indicating desirable magnetic properties for biomedical applications. Transmission electron microscopy (TEM) analysis of the FeB@GSH revealed well-dispersed nanoparticles with diameters smaller than 30 nm. Comprehensive nanotoxicity and biocompatibility assessments were performed using various healthy and cancer cell lines, including 293 T, HeLa, 3T3, MCF7, HCT116, and CFPAC-1. Cytotoxicity assays were conducted on FeB@GSH-treated cells over a dose range of 0-300 mu g/mL during 24-h incubations. Results indicated no significant differences in cell viability between treated and untreated control groups, confirming the biocompatibility of FeB@GSH. Further nanotoxicity evaluations were carried out on 3T3, 293 T, and CFPAC-1 cell lines, focusing on oxidative stress markers and cellular metabolism by measuring antioxidant enzyme activity. Additionally, ion release and mineral metabolism were assessed using inductively coupled plasma mass spectrometry (ICP-MS), revealing no notable variations between the treated and control groups. These findings suggest that FeB@GSH NPs exhibit excellent biocompatibility, making them promising candidates for diverse biomedical applications, including medical imaging, drug delivery systems, and therapeutic interventions.Book Part Citation - Scopus: 1A Recycling Route of Plastics Via Electrospinning: From Daily Wastes To Functional Fibers(Walter de Gruyter GmbH, 2019) Isık, Tuğba; Horzum,N.; Demir, Mustafa MuammerSince large-scale plastic production has begun in the 1940s, plastics have been produced and used globally, bringing many advantages to modern life. The consumption of plastics has increased exponentially due to their low cost, chemical resistance, lightness, durability and ability to combine with other materials. However, plastic materials represent high tonnage in urban wastes, and it is known that these plastics discarded at the end of their useful life by filling the landfill sites. Electrospinning is a well-established and versatile technique for the fabrication of submicron fibers. In addition, it is a promising approach for the recycling of waste polymers without using complex methodologies. In this chapter, utilization of electrospinning approach for the recycling of daily wastes will be discussed. The literature about the daily wastes of both synthetic materials and natural/agricultural materials will be analyzed, and the applications of these materials will be given in detail. © 2019 Walter de Gruyter GmbH, Berlin/Boston. All rights reserved.Article Citation - WoS: 8Citation - Scopus: 10Impact of Simulated Inflammation and Food Breakdown on the Synergistic Interaction Between Corrosion and Wear on Titanium(Elsevier, 2024) Lima, A.R.; Pinto, A.M.P.; Toptan, F.; Alves, A.C.This paper investigates the impact of lactic acid and phosphoric acid additives in artificial saliva (AS), simulating inflammation and food breakdown, on the electrochemical and tribo-electrochemical behavior of titanium. The results showed that, unlike lactic acid, phosphoric acid significantly reduced corrosion resistance, mainly due to local damage and heterogeneities on the passive film. Non-additivated AS caused greater wear volume loss, with mechanical wear identified as the main mechanism. However, when additives were present, a synergistic interplay between corrosion and wear was observed. The study concludes that prolonged exposure to food breakdown could accelerate material degradation in titanium. © 2024 Elsevier LtdArticle Citation - WoS: 3Citation - Scopus: 2Electrocaloric Behaviour of Tape Cast and Grain Oriented Nbt-Kbt Ceramics(Elsevier Sci Ltd, 2024) Unal, Muhammet Ali; Karakaya, Merve; Irmak, Tugce; Yildirim-Ozarslan, Gokce; Avci, A. Murat; Fulanovic, Lovro; Adem, UmutWe have investigated the effects of grain orientation and tape casting process on the electrocaloric properties of 0.82Na(0.5)Bi(0.5)TiO(3)-0.18 K0.5Bi0.5TiO3 (0.82NBT-0.18KBT) ceramics at the Morphotropic Phase Boundary (MPB), using direct and indirect measurements. We observe a larger electrocaloric response for the template-free ceramics compared to 7 and 10 wt% template containing ones, suggesting that grain orientation along rhombohedral < 100 > does not improve the electrocaloric response. Indirect measurements yielded a large adiabatic temperature change of around 3 K under an electric field of 50 kV/cm, which is significantly higher than 0.9 K reached at a lower electric field of 40 kV/cm using the direct measurement.Article Citation - WoS: 3Citation - Scopus: 3Effects of Different Precursors on the Aging and Electrocaloric Properties of Mn-Doped Ba0.95sr0.05tio3 Ceramics(Springer, 2023) Karakaya, Merve; Erdem, Emre; Akdoğan, Yaşar; Adem, UmutIn this study, the effects of different types of Mn precursors (MnO2 and Mn2O3) and sintering temperature on the defect dipole formation, ferroelectric aging and electrical properties were investigated by using Ba0.95Sr0.05TiO3 ceramics as the base. Both Mn precursors were substituted to the Ti-site as 1 mol% and two different sintering temperatures of 1325 and 1400 degrees C were used to study the effect of grain size. We deduced that slightly higher amounts of Mn2+ can be incorporated into the perovskite structure when MnO2 is used as the precursor, by using X-ray diffraction and electron paramagnetic resonance spectroscopy. Mn-doped samples sintered at 1325 degrees C age faster than those sintered at 1400 degrees C. Aging caused a decrease in the electrocaloric effect whereas Mn-doping increased it. This study shows that Mn precursor used for the acceptor doping affects the amount of Mn incorporated into the structure and therefore electrical properties of the resulting ceramics.Article Citation - WoS: 1Citation - Scopus: 1Effect of Compaction and Fluoride Content on the Remelting Efficiency of Pure Magnesium Chips(Taylor & Francis, 2023) Yörük, Pınar; Gökelma, Mertol; Derin, BoraMagnesium is widely used in industries, such as automotive, aerospace, and medical fields. The demand on magnesium has been growing, although the production and melt treatment is complex due to strong oxidation tendency. Recycling of magnesium scraps is crucial due to the criticality of magnesium-containing raw materials in Europe as well as increasing environmental concerns. Remelting of magnesium is typically conducted under a salt flux which absorbs the impurities and protects the melt against oxidation. This study investigates the effect of compaction, fused salt flux, and salt composition on remelting behavior of magnesium chips. Metal yield and coagulation efficiency were calculated after remelting, and samples were characterized by using Scanning Electron Microscope and X-ray Diffraction. The liquidus temperature and density of fluxes were analyzed by FactSage software. Remelting of compacted chips under a fused salt flux with 5 wt.% CaF2 showed the highest magnesium recovery with a yield of 97.7%. Le magnesium est largement utilise dans une variete d'industries, telles que les domaines de l'automobile, de l'aerospatiale et de la medecine. La demande en magnesium s'est accrue, bien que la production et le traitement du bain soient complexes en raison de sa forte tendance a l'oxydation. Le recyclage des dechets de magnesium est crucial en raison de la criticite des matieres premieres contenant du magnesium en Europe ainsi que des preoccupations environnementales croissantes. La refusion du magnesium est effectuee typiquement sous un flux de sel qui absorbe les impuretes et protege le bain contre l'oxydation. Cette etude examine l'effet du compactage, du flux de sel fondu et de la composition du sel sur le comportement a la refusion des copeaux de magnesium. On a calcule le rendement en metal et l'efficacite de la coagulation apres des experiences de refusion, et l'on a caracterise les echantillons a l'aide d'un microscope electronique a balayage et de la diffraction des rayons X. On a analyse la temperature du liquidus (Tliq) et la densite des flux de sel avec le logiciel FactSage. La refusion des copeaux compactes sous un flux de sel fondu avec 5% en poids de CaF2 a montre la recuperation de magnesium la plus elevee avec un rendement de 97.7%Article Citation - WoS: 5Citation - Scopus: 7Characterization and Separation Behavior of Multi-Layers in Aluminum-Rich Waste Pharmaceutical Blisters(Springer, 2023) Çapkın, İrem Yaren; Gökelma, MertolAl-rich waste pharmaceutical blisters (WPBs) have a multi-layer structure that contains aluminum and polymer-based fractions. Although the aluminum mass in WPBs is less than typical aluminum packaging products such as beverage cans, establishing a feasible recycling procedure is possible by separating the fractions to recover both metal and plastic. Hydrometallurgical methods are mostly preferred for the separation of aluminum and plastic in multi-layered structures. This work reports the characterization of Al-rich WPBs and the separation behavior of aluminum and plastic layers. The effects of hydrochloric acid, acetic acid, formic acid, sulfuric acid, ethanol, acetone, and organic solvent (benzene–ethanol–water) on the separation behavior of layers were studied at different temperatures. Furthermore, the recycling yield of the aluminum fraction was experimentally assessed. © 2023, The Minerals, Metals & Materials Society.Article Citation - WoS: 9Citation - Scopus: 9Cold Sintering Assisted Two-Step Sintering of Potassium Sodium Niobate (knn) Ceramics(Elsevier, 2023) Karacasulu, Levent; Ahmetoğlu, Çekdar VakıfPotassium sodium niobate (KNN) ceramics were densified using a multiple-stage sintering process in which initially applied cold sintering process (CSP) was followed by the solid-state sintering between 1100 and 1120 °C. Comparative assessments demonstrated that multi-step sintered samples yielded better properties than conventionally sintering ones. The highest relative density (94.7%) and the best electrical properties were obtained from the sample subjected to cold sintering at 120 °C/1 h using 5 wt% deionized water subsequently heat-treated at 1120 °C/2 h, resulting in a monolithic KNN ceramic having a piezoelectric coefficient of 120 pC/N. © 2023 Elsevier B.V.Article Citation - WoS: 5Citation - Scopus: 6Formation of Monolithic Srtio3-Tio2 Ceramic Heterostructures by Reactive Hydrothermal Sintering(Elsevier, 2023) Karacasulu, Levent; Kartal, Uğur; İçin, Öykü; Bortolotti, Mauro; Biesuz, Mattia; Ahmetoğlu, Çekdar VakıfIn a one-pot approach, monolithic SrTiO3-TiO2 ceramic heterostructures were obtained using the reactive hydrothermal liquid phase densification (rHLPD). Structural, morphological, and photocatalytic properties of the obtained ceramics were analyzed. The relative density of the formed components reached about 80% with reaction time, temperature, and NaOH concentration variation. It was observed via Rietveld refinement that there was no XRD detectable phase other than TiO2 and SrTiO3 in the final structure. The monolithic SrTiO3-TiO2 ceramics obtained by hydrothermal reaction at 120 °C for 24 h in 1 M NaOH concentration showed a dielectric constant being around 500, and the dielectric loss was below 0.25 at frequencies higher than 10 kHz. The SrTiO3-TiO2 heterostructured monoliths having only 20 vol% total porosity and low specific surface area, demonstrated ∼60% efficiency (in 5 h) in degrading Methylene Blue photo-catalytically. © 2023 Elsevier Ltd