Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
9 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Bioavailability Assessment of the Novel Gsh-Functionalized Feb Nanoparticles Via Oxidative Stress and Trace Element Metabolism in Vitro: Promising Tools for Biomedical Applications(Springer, 2024) Aydemir, Duygu; Aribuga, Dilara; Hashemkhani, Mahshid; Acar, Havva Yagci; Çağıran, Özge Balcı; Ulusu, Nuriye NurayIron-based magnetic nanoparticles (NPs) have attracted significant attention in biomedical research, particularly for applications such as cancer detection and therapy, targeted drug delivery, magnetic resonance imaging (MRI), and hyperthermia. This study focuses on the synthesis and glutathione (GSH) functionalization of iron boride (FeB) nanoparticles (NPs) for prospective biomedical use. The GSH-functionalized FeB NPs (FeB@GSH) demonstrated ferromagnetic behavior, with a saturation magnetization (Ms) of 45.8 emu/g and low coercivity (Hc = 1000 Oe), indicating desirable magnetic properties for biomedical applications. Transmission electron microscopy (TEM) analysis of the FeB@GSH revealed well-dispersed nanoparticles with diameters smaller than 30 nm. Comprehensive nanotoxicity and biocompatibility assessments were performed using various healthy and cancer cell lines, including 293 T, HeLa, 3T3, MCF7, HCT116, and CFPAC-1. Cytotoxicity assays were conducted on FeB@GSH-treated cells over a dose range of 0-300 mu g/mL during 24-h incubations. Results indicated no significant differences in cell viability between treated and untreated control groups, confirming the biocompatibility of FeB@GSH. Further nanotoxicity evaluations were carried out on 3T3, 293 T, and CFPAC-1 cell lines, focusing on oxidative stress markers and cellular metabolism by measuring antioxidant enzyme activity. Additionally, ion release and mineral metabolism were assessed using inductively coupled plasma mass spectrometry (ICP-MS), revealing no notable variations between the treated and control groups. These findings suggest that FeB@GSH NPs exhibit excellent biocompatibility, making them promising candidates for diverse biomedical applications, including medical imaging, drug delivery systems, and therapeutic interventions.Article Citation - WoS: 3Citation - Scopus: 3Effects of Different Precursors on the Aging and Electrocaloric Properties of Mn-Doped Ba0.95sr0.05tio3 Ceramics(Springer, 2023) Karakaya, Merve; Erdem, Emre; Akdoğan, Yaşar; Adem, UmutIn this study, the effects of different types of Mn precursors (MnO2 and Mn2O3) and sintering temperature on the defect dipole formation, ferroelectric aging and electrical properties were investigated by using Ba0.95Sr0.05TiO3 ceramics as the base. Both Mn precursors were substituted to the Ti-site as 1 mol% and two different sintering temperatures of 1325 and 1400 degrees C were used to study the effect of grain size. We deduced that slightly higher amounts of Mn2+ can be incorporated into the perovskite structure when MnO2 is used as the precursor, by using X-ray diffraction and electron paramagnetic resonance spectroscopy. Mn-doped samples sintered at 1325 degrees C age faster than those sintered at 1400 degrees C. Aging caused a decrease in the electrocaloric effect whereas Mn-doping increased it. This study shows that Mn precursor used for the acceptor doping affects the amount of Mn incorporated into the structure and therefore electrical properties of the resulting ceramics.Article Citation - WoS: 5Citation - Scopus: 7Characterization and Separation Behavior of Multi-Layers in Aluminum-Rich Waste Pharmaceutical Blisters(Springer, 2023) Çapkın, İrem Yaren; Gökelma, MertolAl-rich waste pharmaceutical blisters (WPBs) have a multi-layer structure that contains aluminum and polymer-based fractions. Although the aluminum mass in WPBs is less than typical aluminum packaging products such as beverage cans, establishing a feasible recycling procedure is possible by separating the fractions to recover both metal and plastic. Hydrometallurgical methods are mostly preferred for the separation of aluminum and plastic in multi-layered structures. This work reports the characterization of Al-rich WPBs and the separation behavior of aluminum and plastic layers. The effects of hydrochloric acid, acetic acid, formic acid, sulfuric acid, ethanol, acetone, and organic solvent (benzene–ethanol–water) on the separation behavior of layers were studied at different temperatures. Furthermore, the recycling yield of the aluminum fraction was experimentally assessed. © 2023, The Minerals, Metals & Materials Society.Article Citation - WoS: 1Citation - Scopus: 2An Investigation on Inclusions Forming During Remelting of Aluminum and Magnesium Scraps Under a Salt Flux(Springer, 2023) Çapkın, İrem Yaren; Gökelma, MertolDue to increasing environmental and economic concerns, the recycling of metals has been increasing in the last decades. Aluminum saves up to 95% of energy when recycled, and magnesium is one of the most common alloying elements in aluminum alloys, contributing to oxidation behavior. Both aluminum and magnesium have a high oxidation tendency during remelting, which raises the necessity for salt flux usage. Salt fluxes remove oxides and other surface contaminants from the target metal. Salt fluxes allow molten metal pieces to coagulate and form the molten bath. Furthermore, it prevents further oxidation of the metal. The presence of fluorides increases the metal yield by promoting coalescence. Although metals and salts are frequently interacting in such processes, there is still a lack of knowledge of the final and intermediate products of the interaction reactions. This study aims to contribute to the literature by investigating the interaction of aluminum and magnesium scraps with salt flux. As a result of the experiments, AlF3, MgF2, Al2O3, MgO, and MgAl2O4 were observed as the main phases in the aluminum and magnesium scraps dross. The presence of CaF2 in the salt flux, which is insoluble in water, was also observed in the analysis results. In addition, fluorine-containing compounds were observed as a result of chemical interactions among the F-, K-, and oxide layers.Article Citation - WoS: 4Citation - Scopus: 5The Effect of Geometrical Characteristics of Tio2 Nanotube Arrays on the Photocatalytic Degradation of Organic Pollutants(Springer, 2023) Kartal, Uğur; Uzunbayır, Begüm; Doluel, Eyyüp Can; Yurddaşkal, Metin; Erol, MustafaHighly ordered TiO2 nanotube arrays (TNAs) were fabricated by electrochemical anodization under varying durations and voltages. The effects of the anodizing parameters on geometrical properties were investigated. The results showed that as the anodizing time increased from 15 to 45 min, the length of the nanotubes increased, but there was no change in their diameter, hence the surface area increased while the open porosity did not change. When the effect of the anodizing voltage was examined, it was observed that both the length and diameter increased as the voltage increased from 15 to 45 V. Thus, a significant increase in open porosity and surface area was observed. The UV-Vis spectrophotometer was used to evaluate the effects of all geometrical characteristics on the photodegradation of methylene blue (MB). The results showed that the anodizing parameters were highly effective on the photocatalytic degradation of MB. With the decrease of the anodizing voltage, the photocatalytic activity increased because of the geometrical characteristics of TNAs. Accordingly, TNAs with the surface area of 25 m(2)/g and the open porosity of 35% obtained by anodizing for 45 min at 15 V showed the highest photocatalytic activity with a degradation efficiency of similar to 81% in 7 h.Article Citation - WoS: 10Citation - Scopus: 7Assessment of Melt Cleanliness of Secondary 5000 Aluminum Alloy Via Non-Metallic Inclusions Characterization(Springer, 2023) Li, Cong; Dang, Thien; Huang, Jinxian; Huang, Chunfa; Li, Jianguo; Friedrich, Bernd; Gökelma, MertolThe extensive energy consumption of primary aluminum production stimulates increasing need of producing primary-quality alloys with secondary sources, during which process amount of non-metallic inclusions (NMIs) in the alloy must be strictly controlled. In the present study funded by AMAP Open Innovation Research Cluster, NMIs generated during remelting a 5000 Al-Mg alloy was investigated to offer benchmarking characters of NMIs with respect to type, morphology, size, composition, and concentration. Under different remelting conditions NMIs formed in the melt ahead of solidification were concentrated using Porous Disc Filtration Apparatus (PoDFA) and characterized microstructurally and quantitatively. Investigated conditions included heating cycle, organic contaminations, and refractory materials. Results suggested oxide films and cuboid particles as typical oxides with, respectively, different compositions. The amount of formed oxides declined with the increase of heating rate. With respect to aluminum carbide (Al4C3), organic contaminations were confirmed to lead to an increased amount of its formation. The carbon-containing refractory material contributed more significantly than organic contaminations on the formation of Al4C3 at melt temperatures over 760 & DEG;C. Formulas were derived based on trial results to enable translation of NMIs PoDFA value [mm(2)/kg] into their mass fraction [ppm] in the melt.Article Citation - WoS: 4Citation - Scopus: 4Rewas 2022: Developing Tomorrow's Technical Cycles(Springer, 2021) Fleuriault, Camille; Gökelma, Mertol; Anderson, Alexandra; Olivetti, Elsa A.REWAS, a sustainability driven conference within The Minerals, Metals & Materials Society (TMS), has a long history of bringing together academia and industry to exchange and reflect on the latest technology developments in the process optimization and waste management fields. The first edition of REWAS (REcycling and WASte symposium) took place in 1999. The scope of the conference has since then broadened to include environmental sustainability, resource management and manufacturing efficiency, liaising these developments to the metallurgical industry in a broader societal and systemic context. The 2022 edition of REWAS which will be hosted at the TMS 2022 Annual Meeting & Exhibition in Anaheim, California, provides a resolute outlook towards Developing Tomorrow's Technical Cycles. Within the metals and materials industry, technical cycles refer to the ensemble of strategies and processes applied to the development of sustainable product loops with the intent to eliminate waste and instead rethink, reuse and upcycle products. The success of technical cycles requires strengthening our circular approach for product life cycle design by providing guidelines and implementation examples to the developers, designers, policy makers and business managers. REWAS promotes such strategies within a priority sector identified for Circular Economy enablement: raw materials supply and management. REWAS 2022 consists of six symposia, and abstract submissions are expected in summer 2021. Topics include recycling and sustainability within the aluminum industry, specifically on casting technologies, recovery of metals from complex products and systems, decarbonization of the metallurgical and manufacturing industry, sustainable production and development perspectives, as well as automatization and digitalization for advanced manufacturing. REWAS 2022 will also include an honorary symposium for Dr. Diran Apelian, whose contributions in metals processing, aluminum and battery recycling, sustainability, education in materials science and more have shaped the path for sustainable materials processing.Article Citation - WoS: 5Citation - Scopus: 7Effect of High Salinity and Temperature on Water-Volcanic Rock Interaction(Springer, 2021) Gören, Ayşegül Yağmur; Gören, Ayşegül Yağmur; Topçu, Gökhan; Demir, Mustafa Muammer; Demir, Mustafa M.; Baba, Alper; Baba, AlperIn order to understand the processes occurring in natural hydrothermal systems, it was carried out a series of water-volcanic rock interaction studies in the laboratory and an intermediate volcanic rock samples from geothermal production wells in Tuzla geothermal field (TGF) in western Turkey. A high-pressure autoclave was used to conduct water-rock interaction experiments under similar conditions of the field. Rainwater and seawater were treated with volcanic rocks at 140 degrees C (reservoir temperature) and 4.5 bar pressure. The change in the ionic content of the resulting fluids was examined in terms of the type of volcanic rocks and mineral saturation index. The results indicate that talc and diopside minerals in geothermal systems may cause scaling at high temperatures depending on the geothermal fluid and pH.Conference Object Citation - WoS: 2Citation - Scopus: 1The Influence of the Casting Speed in Horizontal Continuous Casting of Aluminium Alloy En Aw 6082(Springer, 2021) Obalı, Akın; Dilek, Kerem Ahmet; Akdi, Seracettin; Ürk, Deniz Kavrar; Gökelma, MertolVertical direct chill (VDC) casting is commonly used to produce slabs and billets from wrought aluminium alloys. The fact that the VDC is not a continuous process and moulds must be prepared for the next batch decreases the productivity of the process. Alternatively, horizontal direct chill (HDC) casting simplifies the process and allows a continuous production. The casting speed in the HDC casting is easier to control and can be optimized for different alloys by changing the speed. This study focuses on investigating the effects of casting speed on the macrostructure of 6082 aluminium billets with 60 mm diameter. A demo-scale casting unit was used and the casting speed was changed from 310 to 385 mm/min. Changes in surface condition, macrocracks, microporosity, and diameter of the billets were investigated. Surface quality of the billets became better with the increasing casting speed, while diameter of the billet expands. Furthermore, centreline cracks appear at the casting speed of 355 mm/min. © 2021, The Minerals, Metals & Materials Society.