Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
7 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Bioavailability Assessment of the Novel Gsh-Functionalized Feb Nanoparticles Via Oxidative Stress and Trace Element Metabolism in Vitro: Promising Tools for Biomedical Applications(Springer, 2024) Aydemir, Duygu; Aribuga, Dilara; Hashemkhani, Mahshid; Acar, Havva Yagci; Çağıran, Özge Balcı; Ulusu, Nuriye NurayIron-based magnetic nanoparticles (NPs) have attracted significant attention in biomedical research, particularly for applications such as cancer detection and therapy, targeted drug delivery, magnetic resonance imaging (MRI), and hyperthermia. This study focuses on the synthesis and glutathione (GSH) functionalization of iron boride (FeB) nanoparticles (NPs) for prospective biomedical use. The GSH-functionalized FeB NPs (FeB@GSH) demonstrated ferromagnetic behavior, with a saturation magnetization (Ms) of 45.8 emu/g and low coercivity (Hc = 1000 Oe), indicating desirable magnetic properties for biomedical applications. Transmission electron microscopy (TEM) analysis of the FeB@GSH revealed well-dispersed nanoparticles with diameters smaller than 30 nm. Comprehensive nanotoxicity and biocompatibility assessments were performed using various healthy and cancer cell lines, including 293 T, HeLa, 3T3, MCF7, HCT116, and CFPAC-1. Cytotoxicity assays were conducted on FeB@GSH-treated cells over a dose range of 0-300 mu g/mL during 24-h incubations. Results indicated no significant differences in cell viability between treated and untreated control groups, confirming the biocompatibility of FeB@GSH. Further nanotoxicity evaluations were carried out on 3T3, 293 T, and CFPAC-1 cell lines, focusing on oxidative stress markers and cellular metabolism by measuring antioxidant enzyme activity. Additionally, ion release and mineral metabolism were assessed using inductively coupled plasma mass spectrometry (ICP-MS), revealing no notable variations between the treated and control groups. These findings suggest that FeB@GSH NPs exhibit excellent biocompatibility, making them promising candidates for diverse biomedical applications, including medical imaging, drug delivery systems, and therapeutic interventions.Article Citation - WoS: 1Citation - Scopus: 1Effect of Compaction and Fluoride Content on the Remelting Efficiency of Pure Magnesium Chips(Taylor & Francis, 2023) Yörük, Pınar; Gökelma, Mertol; Derin, BoraMagnesium is widely used in industries, such as automotive, aerospace, and medical fields. The demand on magnesium has been growing, although the production and melt treatment is complex due to strong oxidation tendency. Recycling of magnesium scraps is crucial due to the criticality of magnesium-containing raw materials in Europe as well as increasing environmental concerns. Remelting of magnesium is typically conducted under a salt flux which absorbs the impurities and protects the melt against oxidation. This study investigates the effect of compaction, fused salt flux, and salt composition on remelting behavior of magnesium chips. Metal yield and coagulation efficiency were calculated after remelting, and samples were characterized by using Scanning Electron Microscope and X-ray Diffraction. The liquidus temperature and density of fluxes were analyzed by FactSage software. Remelting of compacted chips under a fused salt flux with 5 wt.% CaF2 showed the highest magnesium recovery with a yield of 97.7%. Le magnesium est largement utilise dans une variete d'industries, telles que les domaines de l'automobile, de l'aerospatiale et de la medecine. La demande en magnesium s'est accrue, bien que la production et le traitement du bain soient complexes en raison de sa forte tendance a l'oxydation. Le recyclage des dechets de magnesium est crucial en raison de la criticite des matieres premieres contenant du magnesium en Europe ainsi que des preoccupations environnementales croissantes. La refusion du magnesium est effectuee typiquement sous un flux de sel qui absorbe les impuretes et protege le bain contre l'oxydation. Cette etude examine l'effet du compactage, du flux de sel fondu et de la composition du sel sur le comportement a la refusion des copeaux de magnesium. On a calcule le rendement en metal et l'efficacite de la coagulation apres des experiences de refusion, et l'on a caracterise les echantillons a l'aide d'un microscope electronique a balayage et de la diffraction des rayons X. On a analyse la temperature du liquidus (Tliq) et la densite des flux de sel avec le logiciel FactSage. La refusion des copeaux compactes sous un flux de sel fondu avec 5% en poids de CaF2 a montre la recuperation de magnesium la plus elevee avec un rendement de 97.7%Article Citation - WoS: 5Citation - Scopus: 7Characterization and Separation Behavior of Multi-Layers in Aluminum-Rich Waste Pharmaceutical Blisters(Springer, 2023) Çapkın, İrem Yaren; Gökelma, MertolAl-rich waste pharmaceutical blisters (WPBs) have a multi-layer structure that contains aluminum and polymer-based fractions. Although the aluminum mass in WPBs is less than typical aluminum packaging products such as beverage cans, establishing a feasible recycling procedure is possible by separating the fractions to recover both metal and plastic. Hydrometallurgical methods are mostly preferred for the separation of aluminum and plastic in multi-layered structures. This work reports the characterization of Al-rich WPBs and the separation behavior of aluminum and plastic layers. The effects of hydrochloric acid, acetic acid, formic acid, sulfuric acid, ethanol, acetone, and organic solvent (benzene–ethanol–water) on the separation behavior of layers were studied at different temperatures. Furthermore, the recycling yield of the aluminum fraction was experimentally assessed. © 2023, The Minerals, Metals & Materials Society.Article Citation - WoS: 1Citation - Scopus: 2An Investigation on Inclusions Forming During Remelting of Aluminum and Magnesium Scraps Under a Salt Flux(Springer, 2023) Çapkın, İrem Yaren; Gökelma, MertolDue to increasing environmental and economic concerns, the recycling of metals has been increasing in the last decades. Aluminum saves up to 95% of energy when recycled, and magnesium is one of the most common alloying elements in aluminum alloys, contributing to oxidation behavior. Both aluminum and magnesium have a high oxidation tendency during remelting, which raises the necessity for salt flux usage. Salt fluxes remove oxides and other surface contaminants from the target metal. Salt fluxes allow molten metal pieces to coagulate and form the molten bath. Furthermore, it prevents further oxidation of the metal. The presence of fluorides increases the metal yield by promoting coalescence. Although metals and salts are frequently interacting in such processes, there is still a lack of knowledge of the final and intermediate products of the interaction reactions. This study aims to contribute to the literature by investigating the interaction of aluminum and magnesium scraps with salt flux. As a result of the experiments, AlF3, MgF2, Al2O3, MgO, and MgAl2O4 were observed as the main phases in the aluminum and magnesium scraps dross. The presence of CaF2 in the salt flux, which is insoluble in water, was also observed in the analysis results. In addition, fluorine-containing compounds were observed as a result of chemical interactions among the F-, K-, and oxide layers.Article Citation - Scopus: 10Development of Lightweight Geopolymer Composites Containing Perlite and Vermiculite(International OCSCO World Press, 2023) Korniejenko, Kinga; Pławecka, Kinga; Bulut, Alperen; Şahin, Baran; Azizağaoğlu, Göksu; Figiela, BeataPurpose: The aim of this work was to prepare and characterise geopolymer composites containing lightweight aggregates-perlite and vermiculite. Design/methodology/approach: The geopolymer matrix was prepared on the basis of fly ash, sand and a 6M sodium hydroxide solution with sodium silicate. The properties of the materials were tested 28 days after the preparation of the samples. The following research methods were used to characterise the composites: compressive and flexural strength tests, microstructural tests using a scanning electron microscope, and thermal conductivity were measured. Findings: The results obtained showed a slight effect of the additives on the strength properties. Lightweight aggregates are characterised by good coherence with the matrix material. Their addition allowed to reduce the density and lowered the thermal conductivity of the materials. The results obtained indicate that the proposed additives can improve the properties of the geopolymer composite for use in the construction industry. Research limitations/implications: Further research should focus on geopolymer composites with perlite and involve fire-resistant and water-absorption tests. Practical implications: The production of lightweight building materials brings a number of benefits, such as reducing the density of building elements and, at the same time, the entire structure, which results in a reduction in their weight, as well as lower transport costs. Such elements have better thermal and acoustic insulation, reflected in the parameters of buildings. An additional advantage is the reduced environmental impact through better insulation properties, lower fuel consumption during transport, etc. Originality/value: The density of the material can be reduced by using lightweight aggregates or obtaining porous material in the foamed process. In the case of geopolymer composites, a number of studies related to foamed materials have been provided, but there is only a few previous research connected with lightweight aggregates such as perlite and vermiculite. © by International OCSCO World Press. All rights reserved. 2023.Article Citation - WoS: 7Citation - Scopus: 8Seed-Mediated Synthesis of Colloidal 2d Halide Perovskite Nanoplatelets(Wiley, 2021) Güvenç, Çetin Meriç; Balcı, SinanColloidal synthesis of two-dimensional lead halide perovskite nanoplatelets (2D LHP NPLs) with a general formula of L-2[APbX(3)](n-1)PbX4 has been widely performed by using hot-injection or ligand assisted reprecipitation methods. Herein, for the first time, we report on seed-mediated synthesis of two and three monolayers (n=2, 3) lead halide perovskite nanoplatelets without using A-site cation halide salt (AX; A=Cesium, methylammonium, formamidinium and, X=Cl, Br, I) and long chain alkylammonium halide salts (LX; L=oleylammonium, octylammonium, butylammonium and, X=Cl, Br, I). The nanocrystal seeds have been prepared by reacting lead (II) halide salt and coordinating ligands in a nonpolar solvent and then they have been reacted with cesium oleate, formamidinium oleate or methylamine. Our facile synthesis route enabling further understanding of the growth dynamics of LHP NPLs provides highly stable, monodisperse NPLs with very narrow absorption and emission linewidths (min. 68 meV), and high PLQY (max. 37.6%).Conference Object X-Ray Fluorescence Spectroscopic Determination of Heavy Metal and Trace Element Concentrations of Origanum Sipyleum From Turkey(Georg Thieme Verlag, 2015) Erdoğan, T. F.; Gönenç, T. M.; Kayalar, H.; Durmuşkahya, Cenk; Hortooğlu, Zehra Sinem; Toktaş, Ümit; Boyalı, F.[No abstract available]