Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
8 results
Search Results
Article Citation - Scopus: 1Audio-magnetotelluric (amt) studies over rajapur hot spring in west coast maharashtra, India(indian Acad Sciences, 2024) Deshmukh, Vasu; Kumar, P. V. Vijaya; Chandrasekaram, D.; Raju, Khasi; Sathishkumar, S.; Srinivas, Y.; Rao, P. B. V. SubbaIn the west coast geothermal provinces, the Rajapur hot spring, located in the southern part of western Maharashtra, is well thought to originate from the interaction of meteoric water with the granitic basement. A 3D AMT survey was conducted to determine the geo-electrical structure of the hot spring. Dimensionality analysis carried out by phase tensor analysis reveals complex subsurface 3D structures. 2D and 3D modelling have yielded three distinct resistivity layers in the Rajapur geothermal field. These layers include a moderately resistive surface layer representing weathered Deccan traps having a thickness of about 100 m, a conductive second layer with a thickness of about 100-400 m represents Kaladgi sediments and a deeper high resistive layer (0.5-1.0 km) representing granitic gneisses basement. High conductivity anomaly within the Kaladgi sediments represents a hydrothermal reservoir that is associated with faults/fractures beneath the Deccan Traps.Article Citation - WoS: 1Citation - Scopus: 1Effect of Compaction and Fluoride Content on the Remelting Efficiency of Pure Magnesium Chips(Taylor & Francis, 2023) Yörük, Pınar; Gökelma, Mertol; Derin, BoraMagnesium is widely used in industries, such as automotive, aerospace, and medical fields. The demand on magnesium has been growing, although the production and melt treatment is complex due to strong oxidation tendency. Recycling of magnesium scraps is crucial due to the criticality of magnesium-containing raw materials in Europe as well as increasing environmental concerns. Remelting of magnesium is typically conducted under a salt flux which absorbs the impurities and protects the melt against oxidation. This study investigates the effect of compaction, fused salt flux, and salt composition on remelting behavior of magnesium chips. Metal yield and coagulation efficiency were calculated after remelting, and samples were characterized by using Scanning Electron Microscope and X-ray Diffraction. The liquidus temperature and density of fluxes were analyzed by FactSage software. Remelting of compacted chips under a fused salt flux with 5 wt.% CaF2 showed the highest magnesium recovery with a yield of 97.7%. Le magnesium est largement utilise dans une variete d'industries, telles que les domaines de l'automobile, de l'aerospatiale et de la medecine. La demande en magnesium s'est accrue, bien que la production et le traitement du bain soient complexes en raison de sa forte tendance a l'oxydation. Le recyclage des dechets de magnesium est crucial en raison de la criticite des matieres premieres contenant du magnesium en Europe ainsi que des preoccupations environnementales croissantes. La refusion du magnesium est effectuee typiquement sous un flux de sel qui absorbe les impuretes et protege le bain contre l'oxydation. Cette etude examine l'effet du compactage, du flux de sel fondu et de la composition du sel sur le comportement a la refusion des copeaux de magnesium. On a calcule le rendement en metal et l'efficacite de la coagulation apres des experiences de refusion, et l'on a caracterise les echantillons a l'aide d'un microscope electronique a balayage et de la diffraction des rayons X. On a analyse la temperature du liquidus (Tliq) et la densite des flux de sel avec le logiciel FactSage. La refusion des copeaux compactes sous un flux de sel fondu avec 5% en poids de CaF2 a montre la recuperation de magnesium la plus elevee avec un rendement de 97.7%Article Citation - WoS: 4Citation - Scopus: 4The Peculiar Potential of Transition Metal Dichalcogenides for Thermoelectric Applications: a Perspective on Future Computational Research(American Institute of Physics, 2023) Özbal, Gözde; Sarıkurt, Sevil; Sevinçli, Haldun; Sevik, CemThe peculiar potential transition metal dichalcogenides in regard to sensor and device applications have been exhibited by both experimental and theoretical studies. The use of these materials, thermodynamically stable even at elevated temperatures, particularly in nano- and optoelectronic technology, is about to come true. On the other hand, the distinct electronic and thermal transport properties possessing unique coherency, which may result in higher thermoelectric efficiency, have also been reported. However, exploiting this potential in terms of power generation and cooling applications requires a deeper understanding of these materials in this regard. This perspective study, concentrated with this intention, summarizes thermoelectric research based on transition metal dichalcogenides from a broad perspective and also provides a general evaluation of future theoretical investigations inevitable to shed more light on the physics of electronic and thermal transport in these materials and to lead future experimental research. © 2023 Author(s).Article Citation - WoS: 3Citation - Scopus: 2Effects of Interphase Boundaries in Ginzburg-Landau One-Dimensional Model of Two-Phase States in Clamped Systems(American Institute of Physics, 2021) Levanyuk, Arkady P.; Minyukov, Sergey A.; Mısırlıoğlu, İbrahim Burç; Okatan, Mahmut BarışPrevious Landau-type models of two-phase state formation in clamped systems whose material exhibits first-order phase transitions in free state neglects the existence of interphase boundaries. Here, we take them into account in the framework of a Ginzburg-Landau one-dimensional model to study the dependence of characteristics of the two-phase state on system size. Unlike earlier works, we find that the transition to the two-phase state from both the symmetrical and nonsymmetrical phases is not continuous but abrupt. For a one-dimensional system with length L studied in this work, we show that the formation of two-phase state begins with a region whose size is proportional to root L. The latent heat of the transition is also proportional to root L -> infinity, recovering the earlier result for infinite systems. The temperature width of the two-phase region decreases with decreasing of L, but we are unable to answer the question about the critical length for two-phase state formation because the approximation used in analytical calculations is valid for sufficiently large L. A region of small values of L was studied partially to reveal the limits of validity of the analytical calculations. The main physical results are also obtainable within a simple approximation that considers the energy of interphase boundary as a fixed value, neglecting its temperature dependence and the thickness of the boundary. A more involved but consistent treatment provides the same results within the accepted approximation and sheds light on the reason of validity of the simplified approach.Article Citation - WoS: 3Citation - Scopus: 4Experimental and First-Principles Investigation of Cr-Driven Color Change in Cesium Lead Halide Perovskites(American Institute of Physics, 2019) Özen, Sercan; Güner, Tuğrul; Topçu, Gökhan; Özcan, Mehmet; Demir, Mustafa Muammer; Şahin, HasanHerein, we report room temperature Cr-doping for all-inorganic perovskites that have attracted great attention in recent years due to their extraordinary optical properties, low cost, and ease of synthesis. Incorporation of Cr 3 + ions into the perovskite crystal lattices is achieved by following a facile route involving an antisolvent recrystallization method at room temperature. It is shown that both Cr-doping and formation of crystals in the CsPbBr x Cl 3 - x phase are provided by increasing the concentration of the CrCl 3 solution. It is also observed that the doping procedure leads to the emergence of three types of distinctive peaks in the PL spectrum originating from CsPbBr x Cl 3 - x domains (476-427nm), Cr-strained host lattices (515nm), and midgap states formed by Cr dopants (675-775nm). It is also found that the Cr-doped perovskites emitting a dark violaceous color change their color to white with a high color rendering index (88) in 30-day time intervals. Easy-tunable optical properties of all-inorganic Cs perovskites indicate their great potential for future optoelectronic device applications.Article Citation - WoS: 5Citation - Scopus: 5Enhancement of the Spontaneous Emission Rate of Perovskite Nanowires Coupled Into Cylindrical Hollow Nanocavities Formed on the Surface of Polystyrene Microfibers(American Chemical Society, 2019) Gökbulut, Belkis; İnanç, Arda; Topçu, Gökhan; Güner, Tuğrul; Demir, Mustafa Muammer; İnci, M. NaciFluorescent CsPbBr3 nanowires are uniformly integrated into a porous polystyrene matrix in the form of microfibers to investigate the changes in their spontaneous emission rate. Cylindrical hollow nanocavities, ranging from 75 to 160 nm in diameter, are grown on the surface of the polymer microfibers during the fabrication process, which allow coupling light that is emitted from the excited CsPbBr3 nanowires. Time-resolved experiments elucidate that the spontaneous emission rate of the perovskite nanowires is observed to increase by a factor of 4.9, upon coupling of the excited optical modes into the nanocavities, which is demonstrated to be in good agreement with our theoretical calculations.Article Citation - WoS: 72Citation - Scopus: 77Gd3+-Doped Alpha-Cspbi3 Nanocrystals With Better Phase Stability and Optical Properties(American Chemical Society, 2019) Güvenç, Çetin Meriç; Yalçınkaya, Yenal; Özen, Sercan; Şahin, Hasan; Demir, Mustafa MuammerBlack alpha-CsPbI3 perovskites are unable to maintain their phase stability under room conditions; hence, the alpha-CsPbI3 phase transforms into a thermodynamically stable yellow delta-CsPbI3 phase within a few days, which has a nonperovskite structure and high band gap for optoelectronic applications. This phase transformation should be prevented or at least retarded to make use of superior properties of alpha-CsPbI3 in optoelectronic applications. In this study, Gd3+ doping was employed with the aim of increasing the stability of alpha-CsPbI3. All doped alpha-CsPbI3 nanocrystals with various levels of Gd3+, between 5 and 15 mol %, have shown greater phase stability than that of the pure alpha-CsPbI3 phase from 5 days up to 11 days under ambient conditions. This prolonged phase stability can be attributed to three potential reasons: increased tolerance factor of the perovskite structure, distorted cubic symmetry, and decreased defect density in nanocrystals. Urbach energy values suggest the reduction of defect density in the doped nanocrystals. Also, use of 10 mol % Gd3+ as a dopant material increases the photoluminescence quantum yield from 70 to 80% and fluorescence lifetime of alpha-CsPbI3 from 47.4 to 64.4 ns. Further, density functional theory calculations are in a good agreement with the experimental results.Article Citation - WoS: 5Citation - Scopus: 6Manufacturing Radar-Absorbing Composite Materials by Using Magnetic Co-Doped Zinc Oxide Particles Synthesized by Sol-Gel(SAGE Publications Inc., 2020) Atay, Hüsnügül Yılmaz; İçin, ÖyküAn indicator of being a strong country in today's world is that they have powerful weapons. In this sector where science is used exceedingly, the "stealth" takes an important place. Radar-absorbing materials are used in stealth technology to disguise an object from radar detection, such that it can allow a plane to be perceived as a bird. In this study, Co-doped zinc oxide reinforced styrofoam sheet composites were manufactured as radar-absorbing materials. For this purpose, Co-doped zinc-ZnO particles were synthesized via the Sol-Gel method with doping concentrations of 0%, 3%, 6%, 9%, and 12%. They were embedded in a styrofoam matrix with different loading levels to see the concentration dependence. The as-prepared powders were characterized by using X-ray diffraction and Scanning Electron Microscope-Energy Dispersive Spectroscopy. Magnetic characterization of samples was carried out using a vibrating sample magnetometer. Finally, the radar-absorbing test was applied with a network analyzer to achieve the main purpose of this research. It was concluded that Co-doped zinc oxide reinforced composites have electromagnetic properties that indicate potential applications in the radar-absorbing area.