Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
13 results
Search Results
Article Citation - WoS: 13Citation - Scopus: 14Synthesis of Albumin Nanoparticles in a Water-Miscible Ionic Liquid System, and Their Applications for Chlorambucil Delivery To Cancer Cells(Elsevier, 2022) Akdoğan, Yaşar; Sözer, Sümeyra Çiğdem; Akyol, Cansu; Başol, Merve; Karakoyun, Çiğdem; Çakan Akdoğan, GülçinSerum albumin has been a preferred protein to generate biodegradable and non-toxic nanoparticles (NPs) for drug delivery applications. Different methods applied for the preparation of serum albumin NPs mostly used organic solvents. Here, we prepared serum albumin NPs in an ionic liquid (IL) system. ILs are considered to be green and designer solvents with unique properties that can replace organic solvents in the synthesis of albumin NPs. Bovine serum albumin (BSA) proteins dissolved in water were transformed into BSA NPs in a water/ Triton™X (TX-100), 1-butanol/1-butyl-3-methylimidazolium trifluoromethanesulfonate (BmimCF3SO3) microemulsion-like system by using a high-speed homogenizer and crosslinker glutaraldehyde. The obtained BSA NPs have been used in drug loading and release studies with a hydrophobic anticancer drug chlorambucil (Chl). Drug loading increased as increasing the ratio of Chl incubated with BSA NPs. Monitoring the drug release by UV–Vis spectroscopy revealed a burst release at first 4 h, but two-thirds of drugs stayed with NPs upon diffusion method. On the other hand, cellular uptake of Chl loaded BSA NPs caused a significant MCF7 breast cancer cell death, whereas free Chl and unloaded BSA NPs did not have a significant effect on the cell viability. Furthermore, in vivo toxicity assessment of BSA NPs obtained in the IL system was conducted in the zebrafish animal model. It showed that zebrafish body is able to eliminate BSA NPs without any toxic side effects and encapsulation of Chl into NPs reduced the toxicity of free Chl. In summary, we showed that BSA NPs with size smaller than 200 nm could be prepared in BmimCF3SO3 mediated system. They can be used for Chl loading (up to 6.9 wt%) with a sustainable release and they induce significant cell death in Chl sensitive cancer cells up to 45% in 24 h. These results indicate that BSA NPs could be prepared alternatively in IL systems and used in drug delivery studies.Article Citation - WoS: 45Citation - Scopus: 48Recrystallization and Grain Growth Kinetics of In718 Manufactured by Laser Powder Bed Fusion(Elsevier, 2022) Doğu, Merve Nur; Davut, Kemal; Obeidi, Muhannad Ahmed; Yalçın, Mustafa Alp; Gu, Hengfeng; Low, Thaddeus Song En; Ginn, Jon; Brabazon, DermotThe recrystallization and grain growth behaviour of IN718 alloy additively manufactured by laser powder bed fusion (L-PBF) is presented herein. The effects of three different temperatures (1050, 1150 and 1250 °C) and holding times (15, 45 and 90 min) were investigated. The texture evolution of the samples was recorded via electron backscatter diffraction (EBSD). The as-built sample is composed of bowl-shaped melt pools, a chessboard-like grain pattern and has a cube texture {100}<001>. Recrystallized grains were observed in the samples treated at 1150 °C for 15 min, as well as the samples treated for longer periods and at higher temperatures. Recrystallization was observed to start from high dislocation density regions, including the overlapping melt pools and the borders of the chessboard-like pattern. The initial cube texture transforms into a first-generation cube-twin texture {122}<212> via a twinning-assisted recrystallization mechanism. Then, those recrystallization nuclei sweep through the high defect density matrix; during which almost no new twins are formed. The samples treated at 1250 °C are almost completely recrystallized, which forms a weaker cube texture and a stronger P-orientation {011}<112>. However, the growth of recrystallized grains is very limited due to the presence of non-coherent precipitates.Article Citation - WoS: 28Citation - Scopus: 33Cold Sintering as a Promising Isru Technique: a Case Study of Mars Regolith Simulant(Elsevier, 2023) Karacasulu, Levent; Karl, David; Gurlo, Aleksander; Ahmetoğlu, Çekdar VakıfMars regolith simulant (MGS-1) was densified for the first time via a cold sintering process (CSP) as a novel in-situ resource utilization (ISRU) concept. The technique comprises the utilization of NaOH solution as a liquid media during the densification of simulant powder with <100 μm particle size. In as short as 30 min, with the increase in the NaOH concentration (from 3 M to 10 M) and processing temperature (from 150 °C to 250 °C), the relative densities of the regolith compacts and the mechanical properties were enhanced. The artifacts produced with Mars regolith simulant powder at 250 °C using 10 M NaOH solution yielded a relative density of around 88% and compressive strength reaching ∼45 MPa.Article Citation - WoS: 10Citation - Scopus: 10An in Vivo Zebrafish Model Reveals Circulating Tumor Cell Targeting Capacity of Serum Albumin Nanoparticles(Elsevier, 2022) Çakan Akdoğan, Gülçin; Ersöz, Esra; Sözer, Sümeyra Çiğdem; Gelinci, EmineNanoparticles are promising tools of drug delivery in modern medicine. There is a need for fast and reliable models for in vivo validation of newly developed nanocarriers. Here, we report a fast and easy zebrafish larval model to study the biodistribution and cancer cell targeting capacity of serum albumin nanoparticles in vivo. Fluorescently tagged Bovine Serum Albumin Nanoparticles (BSA-NPs) delivered intravenously to the zebrafish larvae, can be used to study the biodistribution via live imaging. We showed that the BSA-NPs were instantly distributed to the larval vasculature including the brain, without causing any toxicity. The clearance of nanoparticles from the body occurred within few days, which gives sufficient time to study anti-cancer efficiency of the BSA-NPs. Next, we asked whether the BSA-NPs can target the cancer cells in circulation. We established a circulating tumor cell (CTC) xenograft model and described a quantitative method for colocalization and cancer cell death analysis in the intact live organism. We showed that BSA-NPs effectively found and localized to MCF7 cells in vasculature which were killed upon doxorubicin delivery. Interestingly, folic acid coating of BSA-NPs caused faster colocalization but did not increase the overall cell death. This is the first report of the biodistribution, toxicity and anti-cancer effectiveness of serum albumin-based nanoparticles in the zebrafish model. Moreover, here we report for the first time that BSA-NPs are able to target the CTCs in an in vivo model. The zebrafish CTC model and the analysis protocol reported here can be used to assess CTC targeting capacity of nanoparticles and devise patient specific CTC targeting tests.Article Citation - WoS: 2Citation - Scopus: 5Experimental Modeling of Antimony Sulfides-Rich Geothermal Deposits and Their Solubility in the Presence of Polymeric Antiscalants(Elsevier, 2022) Karaburun, Emre; Sözen, Yiğit; Çiftçi, Celal; Şahin, Hasan; Baba, Alper; Akbey, Ümit; Yeşilnacar, Mehmet İrfan; Erdim, Eray; Regenspurg, Simona; Demir, Mustafa MuammerAntimony (Sb)-rich geothermal deposits have been observed in many geothermal power plants worldwide. They occur as red-colored, sulfidic precipitates disturbing energy-harvesting by clogging the geothermal installations. In order to prevent the formation of this scale, information on its physicochemical features is needed. For this purpose, Sb-rich sulfide-based deposits were synthesized at controlled conditions in a pressurized glass reactor at geothermal conditions (135 °C and 3.5 bar). Various polymeric antiscalants with different functional groups, such as acrylic acid, sulphonic acid, and phosphonic acid groups were tested for their effect on Sb sulfide solubility. An additional computational study was performed to determine the binding energy of Sb and S atoms to these groups. The results suggest that sulfonic acid groups are the most affective. Therefore, it was concluded that these macromolecule containing sulfonic acid groups and poly (vinyl sulfonic acid) derivatives could potentially act as antiscalants for the formation of antimony sulfide.Article Citation - WoS: 3Citation - Scopus: 4Enhancement of the Electrocaloric Effect in Pbzr0.7ti0.3o3 Ceramics Via La Doping: Driven by Phase Co-Existence or Defect Effects?(Elsevier, 2022) Gözüaçık, Namık Kemal; Bayır, Mustafa Çağrı; Okatan, Mahmut Barış; Mısırlıoğlu, I. Burç; Alkoy, Sedat; Menşur Alkoy, EbruLattice defects and their effects have been pivotal in studies of phase transitions in a wide range of materials. Introduction of such defects into a ferroelectric material through doping of secondary elements can be tailored towards specific applications but the mechanism through which the bulk properties change is seldom scrutinized. Here we study the effect of systematic La substitution into PbZr0.7Ti0.3O3 (PZT 70/30) ceramics whereby we analyzed the temperature dependent properties and estimated the temperature changes that could be induced upon application of an external electric field, namely the electrocaloric effect (ECE). Expecting the entropic changes to be maximal under an applied field, the suitability of the La doped PZT 70/30 system for EC applications had been a motivation to undertake the current task as this composition reportedly can host a rich variety of phases depending on La content including relaxor and antiferroelectric (AFE) states. An electrocaloric (EC) temperature change of 1.15 °C in a wide range of temperatures for 8% La doping at 45 kV/cm applied field was estimated from experimental data, the possible origins of which is discussed. We were able to explain the experimental results by adopting a Landau-Ginzburg based computational approach coupled with elasticity and electrostatics whereby La sites are treated as point defects in a PZT 70/30 lattice. The gradual slanting of the hystereses and reduction of the transition temperature in the samples with increasing La content is claimed to be a direct consequence of the electrical fields due to formation of dipolar defect complexes as backed by our simulations. The ECE is discussed in the light of the simulations and recent results for AFE ceramics.Article Citation - WoS: 6Citation - Scopus: 6A Numerical Methodology for Monitoring Stress Distributions and Experimental Proof of the Concept on Metal Embedded Thin Polymer-Matrix Composites Using X-Ray Diffraction(Elsevier, 2022) Demir, Eralp; Sas, Hatice S.; Işık, Murat; Aydoğan Güngör, Eda; Davut, KemalIn this study, a numerical methodology is developed to monitor stress distributions and an experimental technique is investigated to measure stresses on metal embedded polymer matrix fiber-reinforced composite materials using X-ray diffraction (XRD) method. The numerical method successfully predicts the stress distributions using only a few data points with an average accuracies of 11.6% and 11.8%, respectively for tapered and open hole tensile sample geometries. Experimental part of this study investigates different methodologies to measure stresses on surfaces of polymer composites materials of thin walled structures by XRD. For this reason, metallic materials were integrated onto the surface and near-surface of polymer matrix composites in three different configurations as in the forms of metal foil, metal powder, and metal wire mesh. In-situ experiments of measured and applied stresses revealed metal powder embedded composite materials as a promising material configuration for reliable monitoring of stresses.Article Citation - WoS: 39Citation - Scopus: 41Effect of Post Fabrication Aging Treatment on the Microstructure, Crystallographic Texture and Elevated Temperature Mechanical Properties of In718 Alloy Fabricated by Selective Laser Melting(Elsevier, 2022) Özer, Seren; Bilgin, Güney Mert; Davut, Kemal; Esen, Ziya; Dericioğlu, Arcan.FThe effect of building direction and post fabrication aging treatment on the microstructure, crystallographic texture and high temperature mechanical properties of Inconel 718 (IN718) alloy fabricated by selective laser melting (SLM) method was investigated. After aging, arc-shaped structures seen in as-fabricated samples disappeared and converted into a mixture of columnar and equiaxed grains. Nano-sized γ″ and/or γ′ precipitates were formed upon aging; however, MC type carbides and Laves phase encountered in as-fabricated samples were not dissolved completely after aging. Moreover, aging did not alter the texture ((001)//building direction (BD)) of as-fabricated samples. Mechanical properties of the alloys under tension were influenced by the build direction, aging time and test temperature. As-fabricated samples produced in vertical direction exhibited higher room temperature strengths with lower ductility due to orientation of overlapped prior melt pools. Room temperature tensile test results revealed that peak aging caused a significant improvement in ultimate tensile strength (UTS), from 1066.5 MPa and 998.4 MPa to 1408.5 MPa and 1330.4 MPa whereas elongation values decreased from 27.5% and 32.2% to 19.6% and 23.7% in vertically and horizontally built samples, respectively. Peak-aged samples (aged at 700 °C for 8 h) tested at 600 °C displayed serrated regions in their stress-strain curves due to dynamic strain aging (DSA). Although strength values of the samples displayed an expected decrease by temperature, ductility of the samples reduced to minimum at temperatures around 700–800 °C, which was attributed to intermediate temperature embrittlement.Article Citation - WoS: 20Citation - Scopus: 20Preliminary Tribo-Electrochemical and Biological Responses of the Ti-Tib In-Situ Composites Intended for Load-Bearing Biomedical Implants(Elsevier, 2022) Sousa, Lia; Toptan, Fatih; Alves, Alexandra C.; Costa, N. A.; Gemini Piperni, Sara; Rossi, Andre Linhares; Ribeiro, Ana R.; Simöes, Sönia; Toptan, FatihPoor tribocorrosion resistance of Ti and its alloys remains as a concern for load-bearing biomedical implants. Despite being an effective method to improve tribocorrosion resistance, titanium matrix composites (TMCs) have yet to be used in this type of applications. In-situ TiB (titanium boride) and TiC (titanium carbide) reinforcement phases have been considered as one of the best options to produce TMCs once these phases present high compatibility and strong interfacial bonding with Ti. Although the effect of these phases on the mechanical properties of Ti has been thoroughly researched in the last years, their effect on corrosion, tribocorrosion and biocompatibility of Ti is yet to be fully understood. In this work, in-situ Ti-TiB-TiCx composites obtained by reactive hot pressing showed identical corrosion response compared to the unreinforced Ti but displayed improved tribocorrosion behaviour. Under 0.5 N load, composites presented as average a reduction of 51% in wear volume loss and under 10 N the reduction was up to 93%. Early biological tests showed promising results, as composites were biocompatible and induced osteoblasts spreading and possibly proliferation most probably due to composite chemistry and surface hardness.Article Citation - WoS: 30Energy Harvesting Nanogenerators: Electrospun Β-Pvdf Nanofibers Accompanying Zno Nps and Zno@ag Nps(Elsevier, 2021) Zeyrek Ongun, Merve; Oğuzlar, Sibel; Kartal, Uğur; Yurddaşkal, Metin; Cihanbeğendi, Özge; Zeyrek Ongun, Merve; Oğuzlar, Sibel; Kartal, Uğur; Yurddaşkal, Metin; Cihanbeğendi, ÖzgeThis paper aims to demonstrate that synthesized nano-scale zinc oxide (ZnO) and different concentrations (1, 3 and 5 wt%) of silver-doped zinc oxide (ZnO@Ag) nanoparticles (NPs), which were employed to enhance the piezoelectric content of the electrospun β-phase poly (vinylidene fluoride) PVDF nanofibers, may be an alternative for usual semiconductor dopant. The structural and morphological properties of all the synthesized materials were investigated. The impedance and the capacitance values of the manufactured nanogenerators were also investigated at room temperature. The peak-to-peak amplitude output voltage data of ZnO NPs and ZnO@Ag NPs doped PVDF-based electrospun nanomats were measured using digital oscilloscope while a finger-tapping action at a frequency of ∼1 Hz was conducted. The electrical output of 5 wt% Ag-doped ZnO-based β-PVDF nanofibers increased from 0.5 to 1.5 V compared to undoped β-PVDF samples. These findings have a wide range of auspicious applications, including energy harvesting devices, portable electronic systems, and self-powered electrical gadgets that can be worn.