Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
7 results
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Influence of Processing Method of Cocrmo Dental Alloy on the Corrosion Behavior in Artificial Saliva(Wiley, 2022) Pontes, Joana R.; Pinto, Ana M. P.; Ariza, Edith; Alves, Alexandra C.; Toptan, FatihRemovable or fixed dental frameworks are usually made of CoCr alloys. The CoCr dental alloys are produced traditionally by lost-wax casting. However, alternative processing routes, such as hot-pressing, are being studied for dental applications. The purpose of the present work was to assess the corrosion resistance of CoCrMo dental alloy produced by conventional lost-wax casting and hot-pressing. The corrosion behavior was studied in artificial saliva at 37°C by potentiodynamic polarisation tests. Immersion tests were performed to evaluate the growth of the passive film where electrochemical impedance spectroscopy was used at different immersion periods. Results showed slightly better corrosion resistance in terms of ipass for CoCrMo samples obtained by hot-pressing. On the other hand, the immersion tests showed a more stable and thicker passive film formed on hot-pressed CoCrMo dental alloy, pointing out that hot-pressing may be considered a promising technique to produce CoCrMo dental structures.Article Citation - WoS: 1Citation - Scopus: 2Preparation and Photocatalytic Performances of Zno Nanostructures: Effects of Anodization Voltage and Time(Wiley, 2022) Öksüz, Ahmet Emrecan; Yurddaşkal, Metin; Doluel, Eyyup Can; Kartal, Uğur; Dikici, TuncayIn this study, ZnO nanostructures with different morphologies were produced by varying anodizing parameters (time and voltage), and the photocatalytic activities of these structures were examined. ZnO nanostructures were fabricated through different voltage and duration consisting of nine samples with KHCO3 solution as an electrolyte. The produced ZnO nanostructures were investigated by using X-ray diffraction (XRD), scanning electron microscopy, X-ray photoelectron spectroscopy, and UV–vis spectrophotometer. It was found that the morphology of ZnO was formed as nanosponge, nanoflower, nanowire, heterogeneous structures. ZnO nanostructures were identified by matching XRD peaks due to the ICDD database. Experiments on photocatalytic degradation of methylene blue demonstrated the photocatalytic activity of ZnO samples. The best photocatalytic performance of the samples was observed by S1 sample, which was anodized for 30 min in 0.05 M of KHCO3 electrolyte at 20 V, after 420 min exposure of the UV–vis light source with the degradation rate of 87.3%. Such ZnO nanostructures exhibit unique properties and have high potential for wastewater treatment.Article Citation - WoS: 2Citation - Scopus: 1Effects of Electrospraying Parameters on Deposition of La0.3sr0.7fe0.7cr0.3o3−δ Cathode Layer on Gdc(Wiley, 2022) Akkurt, Sedat; Sındıraç, Can; Özmen Egesoy, Tuğçe; Atıcı, Gökçe; Erişman, Elif; Erğen, Emre; Büyükaksoy, AligülHigh performance in intermediate temperature solid oxide fuel cells requires improvements especially in the microstructure of the cathode layer. New cobalt-free cathode materials are used because cobalt-containing cathodes have higher thermal expansion coefficients, poor long-term chemical stability, and lower mechanical stability. Recently cobalt-free cathodes have been proposed to solve these issues by using deposition methods other than electrospray deposition (ESD). In this study, ESD method is used to develop a cobalt-free cathode layer. The electrolyte layer is gadolinium-doped ceria that is deposited with La0.3Sr0.7Fe0.7 Cr0.3O3−δ (LSFCr) prepared by 2-butoxyethanol and ethylene glycol solvents as opposed to conventional solvents. Experimental ESD parameters are tested at different levels and combinations by applying statistical experimental design methods to optimize the microstructure. Coating deposited as such demonstrated higher electrochemical performance than similar electrodes fabricated by other methods.Article Citation - WoS: 3Citation - Scopus: 4Partial Austenitisation and Tbf Steel Composed of Ferrite, Bainitic Ferrite, and Austenite(Taylor & Francis, 2022) Erişir, Ersoy; Bilir, Oğuz Gürkan; Sözer, Yunus Emre; Ararat, Özge; Davut, KemalA TRIP-aided bainitic-ferritic (TBF) steel with a chemical composition of Fe-0.19C-1.7Mn-1.09Si-0.51Al-0.05Nb (wt-%) was partially austenitised from a hot-rolled martensitic initial microstructure. After the hot rolling, the martensitic specimens were reheated to different intercritical temperatures and then austempered at 350 degrees C. Thus, the effect of the initial microstructure of TBF steel on intercritical austenite formation during partial austenitisation was studied. The microstructures were investigated by scanning electron microscopy and electron backscatter diffraction (EBSD), and the tensile properties were tested. Microstructural observations revealed that a final microstructure of fine ferrite, bainitic ferrite, and retained austenite can be obtained. The steel partial austenitised at 770 degrees C showed a good combination of ultimate tensile strength and total elongation.Article Citation - WoS: 4Citation - Scopus: 6Electrospinning of Fatty Acid-Based and Metal Incorporated Polymers for the Fabrication of Eco-Friendly Fibers(Wiley, 2022) Erdem, Çağlar; Isık, Tuğba; Horzum, Nesrin; Hazer, Baki; Demir, Mustafa MuammerAccumulation of plastic wastes occupies large space in gyres of the oceans called the 7th continent. This high-level concentration of toxic plastic wastes causes harmful consequences for marine life, therefore petroleum-originated plastics must be replaced (or at least partially) with natural resources. The environmental trends in material preparation promote the utilization of greener methods and materials when the limited primary sources are considered. Starting from the fatty acid macroperoxide initiators, synthesis of bio-based polymers using less commercial chemicals and stepwise green synthesis schemes could be possible in the near future. In this research, autoxidized vegetable oil initiators (castor, limonene, and soybean oil) containing metal nanoparticles (silver, platinum, and gold) are employed for free radical polymerization of vinyl monomers. The metal loaded and vegetable oil-based polymers are processed by electrospinning and end up with the successful fabrication of continuous fibers. Ag-loaded ricinoleic acid based polymers show notable antibacterial activity against Escherichia coli. This approach offers a remarkable minimization of the initiator consumption in the synthesis of such synthetic macromolecules as well as nanoparticle containing polymer composites while still maintaining the ease of processing. Transforming the obtained graft copolymers to electrospun nanofibers facilitates the use as support materials for antibacterial surfaces.Article Citation - WoS: 5Citation - Scopus: 4Characterization of Water Solubility and Binding of Spin Labeled Drugs in the Presence of Albumin Nanoparticles and Proteins by Electron Paramagnetic Resonance Spectroscopy(Wiley-Blackwell, 2022) Sözer, Sümeyra Çiğdem; Akdoğan, YaşarElectron paramagnetic resonance (EPR) spectroscopy is an advantageous technique to monitor solubility of drugs in an aqueous solution. In the presence of a drug carrier, the bound and unbound drug fractions can be determined in the same sample simultaneously. To enhance the solubility of hydrophobic drugs, a transporter protein of bovine serum albumin (BSA) can be used directly or in the form of nanoparticle. Moreover, a cationic BSA can be used to enhance anionic drug loading. Here, drugs with different water solubility, salicylic acid (high), ibuprofen (low) and chlorambucil (none) were spin labeled and studied with EPR spectroscopy. Remarkably, it has been shown that albumin nanoparticles are much more effective than albumin proteins in dissolving hydrophobic drugs in water. Furthermore, different drug loading methods were compared, and different from other techniques drug release can be monitored directly from the NPs pellet dissolution by EPR spectroscopy.Article Citation - WoS: 3Citation - Scopus: 1Transition Metal Salt Promoted, Green, and High-Yield Synthesis of Silver Nanowires for Flexible Transparent Conductive Electrodes(Wiley-Blackwell, 2021) Sarısözen, Sema; Tertemiz, Necip Ayhan; Arıca, Tuğçe Aybüke; Polat, Nahit; Kocabaş, Çoşkun; Mert Balcı, Fadime; Balcı, SinanSilver nanowires (AgNWs) have attracted considerable interest from both academia and industry owing to their excellent electrical, optical, and chemical properties. For large-scale synthesis of AgNWs, the polyol method involving ethylene glycol, a toxic alcohol, has been widely used. We herein report on a facile, green, high yield, transition metal salt promoted, open atmosphere method for the synthesis of high quality AgNWs in a glycerol-water mixture. We have shown that transition metal salts have a strong influence on the morphology of AgNWs. Importantly, in the presence of copper(II) chloride, AgNWs with a high aspect ratio of around 400 (length, 36 μm; diameter, 90 nm) were obtained. Additionally, for the first time, we have demonstrated AgNWs based flexible transparent conductive electrodes (TCEs) on poly(sodium 4-styrenesulfonate) (PSS) treated polyethylene terephthalate (PET) substrate with a sheet resistance of 34 Ω/sq and transmittance of 91 % at 550 nm. The PSS layer on the PET substrate generated a highly hydrophilic surface, which boosts interaction of AgNWs with the PET surface. We envision that our results would play a significant role both in the synthesis of AgNWs with high aspect ratio and also in designing new rigid and flexible TCEs having high transmittance and low sheet resistance for applications especially in printable solar cells, organic light emitting diodes, and high performance flexible electronics.