Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
95 results
Search Results
Review Citation - WoS: 10Citation - Scopus: 14A Review on Characterization and Recyclability of Pharmaceutical Blisters(Elsevier, 2023) Capkin, Irem Yaren; Gokelma, MertolPackaging is one of the biggest sectors in the world and the use of aluminium is widespread in the packaging industry. Pharmaceutical blister packages generate a significant amount of solid waste, typically containing plastics and aluminium as thin layers. Since these packages have a complex structure with multiple layers, they are hard to recycle. A separation process of the plastic and aluminium is needed prior to recycling. Hydrometallurgical or thermal processes can be used for the separation. This work reviews the characterization of different types of blisters and the different reagents used in the separation process of the blister layers. Parameters and results of separation processes by using hydrochloric acid, formic acid, acetic acid, organic solvents, and phosphoric acid were discussed as well as the thermal degradation.Article Citation - WoS: 3Citation - Scopus: 6Investigation of the Influence of High-Pressure Torsion and Solution Treatment on Corrosion and Tribocorrosion Behavior of Cocrmo Alloys for Biomedical Applications(MDPI, 2023) Yılmazer, Hakan; Caha, İhsan; Dikici, Burak; Toptan, Fatih; Işık, Murat; Niinomi, Mitsuo; Nakai, Masaaki; Alves, Alexandra CruzIn this study, the influence of the high-pressure torsion (HPT) processing parameters and solution treatment (ST) on the corrosion and tribocorrosion behavior of CoCrMo (CCM) alloys was investigated for possible usage in biomedical applications. The corrosion behavior of the CCM alloys was investigated by using potentiodynamic scanning (PDS) and electrochemical impedance spectroscopy (EIS) tests. Tribocorrosion tests were carried out in a reciprocating ball-on-plate tribometer at 1 Hz, 1 N load, and 3 mm stroke length for 2 h. All electrochemical measurements were performed using a potentiostat in standard phosphate-buffered saline (PBS) solution at body temperature (37 +/- 2 degrees C). The samples were characterized by using a scanning electron microscope (SEM), transmission electron microscope (TEM), optical microscope (OM), and X-ray diffraction (XRD). The deepness and width of wear tracks were examined by using a profilometer. The results showed that HPT and ST processes did not affect significantly the corrosion resistance of samples. However, the ST-treated samples had a higher material loss during sliding in standard phosphate-buffered saline (PBS) at body temperature as compared to HPT-treated samples.Article Citation - WoS: 19Citation - Scopus: 19Processing of Polymer-Derived, Aerogel-Filled, Sic Foams for High-Temperature Insulation(Wiley, 2023) Zambotti, Andrea; Ionescu, Emanuel; Gargiulo, Nicola; Caputo, Domenico; Ahmetoğlu, Çekdar Vakıf; Santhosh, Balanand; Biesuz, MattiaPorous polymer-derived ceramics (PDCs) are outperforming materials when low-density and thermal inertia are required. In this frame, thermal insulating foams such as silicon carbide (SiC) ones possess intriguing requisites for aerospace applications, but their thermal conductivity is affected by gas phase heat transfer and, in the high temperature region, by radiative mechanisms. Owing to the versatility of the PDC route, we present a synthesis pathway to embed PDC SiC aerogels within the open cells of a SiC foam, thus sensibly decreasing the thermal conductivity at 1000 degrees C from 0.371 W center dot m(-1)K(-1) to 0.243 W center dot m(-1)K(-1). In this way, it was possible to couple the mechanical properties of the foam with the insulating ability of the aerogels.The presented synthesis was optimized by selecting, among acetone, n-hexane, and cyclohexane, the proper solvent for the gelation step of the aerogel formation to obtain a proper mesoporous colloidal structure that, after ceramization at 1000 degrees C, presents a specific surface area of 193 m(2)center dot g(-1). The so-obtained ceramic composites present a lowest density of 0.18 g center dot cm(-3), a porosity of 90% and a compressive strength of 0.76 MPa.Article Citation - WoS: 20Citation - Scopus: 22Fabrication and Properties of Novel Porous Ceramic Membrane Supports From the (sig) Diatomite and Alumina Mixtures(Elsevier, 2022) Aouadja, Faycal; Bouzerara, Ferhat; Güvenç, Çetin Meriç; Demir, Mustafa M.In this paper, the manufacturing of macro-porous tubular ceramic supports for membranes is described. The novel supports are fabricated from natural diatomite and alumina raw materials using the extrusion method. The structure was analyzed by X-ray diffraction (XRD) and mercury porosimetry techniques; the presence of possible defects was investigated by scanning electron microscopy (SEM). The permeability has been measured from water flux in standard experiments. Experimental results show that the open porosity, the average pore size (APS), the pore size distribution, the strength, and the permeability of sintered supports, have been found to depend, mainly on the concentration of alumina (Al2O3) additive. Supports prepared with the addition of 10 wt.% of alumina and sintered at 1200 degrees C, can be considered as the most optimized; they have a porosity ratio of about 46%, an APS is around 7.7 mu m, a flexural strength value of about 28 MPa, and water permeability of around 15 m(3)h(-1) m(-2) bar(-1). Such materials could be of great interest in the supports fabrication for membrane application, for instance, water filtration. (C) 2021 SECV. Published by Elsevier Espana, S.L.U.Article Citation - WoS: 22Citation - Scopus: 21Preparation of Interconnected Pickering Polymerized High Internal Phase Emulsions by Arrested Coalescence(American Chemical Society, 2022) Sherborne, Colin; Reilly, Gwendolen C.; Claeyssens, Frederik; Durgut, Enes; Aldemir Dikici, BetülEmulsion templating is a method that enables the production of highly porous and interconnected polymer foams called polymerized high internal phase emulsions (PolyHIPEs). Since emulsions are inherently unstable systems, they can be stabilized either by surfactants or by particles (Pickering HIPEs). Surfactant-stabilized HIPEs form materials with an interconnected porous structure, while Pickering HIPEs typically form closed pore materials. In this study, we describe a system that uses submicrometer polymer particles to stabilize the emulsions. Polymers fabricated from these Pickering emulsions exhibit, unlike traditional Pickering emulsions, highly interconnected large pore structures, and we related these structures to arrested coalescence. We describe in detail the morphological properties of this system and their dependence on different production parameters. This production method might provide an interesting alternative to poly-surfactant-stabilized-HIPEs, in particular where the application necessitates large pore structures.Article Citation - WoS: 10Citation - Scopus: 11Improved Tribocorrosion Behavior Obtained by In-Situ Precipitation of Ti2c in Ti-Nb Alloy(MDPI, 2022) Gonçalves, Vinícius Richieri Manso; Çaha, İhsan; Alves, Alexandra Cruz; Toptan, Fatih; Rocha, L. A.Novel in-situ Ti-based matrix composites (TMCs) were developed through the reactive hot pressing of Ti + NbC powder blends. Due to the chemical reaction that occurred in the solid-state during processing, the produced samples were composed of an Nb-rich β-Ti phase that formed a metallic matrix along with Ti2C as a reinforcing phase. By employing different proportions of Ti:NbC, the phase composition of the alloys was designed to contain different ratios of α-Ti and β-Ti. The present work investigated the corrosion and tribocorrosion behavior of the composites, compared to unreinforced Ti, in a phosphate-buffered solution (PBS) at body temperature. Corrosion tests included potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). Tribocorrosion tests were carried out using a ball-on-plate tribometer with sliding performed at open circuit potential (OCP) and under anodic potentiostatic conditions. Results showed that the stabilization of the β phase in the matrix led to a decrease in the hardness. However, the formation of the in-situ reinforcing phase significantly improved the tribocorrosion behavior of the composites due to a load-carrying effect, lowering the corrosion tendency and kinetics under sliding. Furthermore, localized corrosion was not observed at the interface between the reinforcing phase and the matrix.Article Citation - WoS: 8Citation - Scopus: 11Spreadability of Metal Powders for Laser-Powder Bed Fusion Via Simple Image Processing Steps(MDPI, 2022) Ahmetoğlu, Çekdar Vakıf; Hasdemir, Beyza; Biasetto, LisaThis paper investigates the spreadability of the spherical CoCrWMo powder for laser- powder bed fusion (PBF-LB) by using image processing algorithms coded in MATLAB. Besides, it also aims to examine the spreadability dependence with the other characteristics such as powder size distribution, apparent density, angle of repose. Powder blends in four different particle size distributions are prepared, characterized, and spreadability tests are performed with the PBF-LB. The results demonstrate that an increase in fine particle ratio by volume (below 10 µm) enhances the agglomeration and decreases the flowability, causing poor spreadability. These irregularities on the spread layers are quantified with simple illumination invariant analysis. A clear relation between powder spreadability and 3D printed structures properties in terms of residual porosity could not be defined since structural defects in 3D printed parts also depends on other processing parameters such as spatter formation or powder size over layer height ratio.Article Citation - WoS: 7Citation - Scopus: 10Enhanced Light–matter Interaction in a Hybrid Photonic–plasmonic Cavity(Springer, 2021) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet NaciStrongly concentrated optical fields around a metal nanoparticle in the close vicinity of a dipole noticeably facilitate dramatic changes in the localized density of states due to hybrid photonic–plasmonic mode couplings as compared to that of the pure cavity mode fields. Significant variations of the field intensity in the presence of the metal nanoparticle elucidate enhanced light–matter interaction in a hybrid structure. The enhancement factor of the light–matter interaction is studied through the single-atom cooperativity parameter, which is directly proportional to the ratio of the fluorescence lifetimes of the off-resonant and on-resonant emission. A compact and cost-effective hybrid device, which includes a microfiber cavity, supporting whispering gallery modes, and a well-defined solid nanostructure, consisting of a gold nanoparticle core, overcoated by a silica shell, and decorated with CdS/CdSe quantum dots, is demonstrated to offer an outstanding potential for the enhancement of light–matter interaction. Surface plasmons of a gold nanoparticle, placed inside a hollow cylindrical nanostructure at the surface of a microfiber, are activated upon excitation of the dipoles of the quantum emitters, which are on-resonance with the whispering gallery mode. Time-resolved experiments demonstrate that the single-atom cooperativity parameter of the quantum dots is enhanced by a factor of about 4.8 in the presence of the gold nanoparticle being simultaneously in strong interaction with the cavity mode field and the metal nanoparticle’s surface plasmons.Correction Correction To: Enhanced Light–matter Interaction in a Hybrid Photonic–plasmonic Cavity(Springer, 2022) Gökbulut, Belkıs; İnanç, Arda; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet NaciIn this article the statement in the Funding information section was incorrect. The correct Funding information is as follows. ‘Dr Belkıs Gökbulut acknowledges TUBITAK for the financial support provided under Contract Number 120F323’.Article Citation - WoS: 10Citation - Scopus: 10Influence of Calcium Acetate Concentration in Electrolyte on Tribocorrosion Behaviour of Mao Treated Titanium(MDPI Multidisciplinary Digital Publishing Institute, 2021) Sousa, Luis; Mendes, Ana Rita; Pinto, Ana Maria Pires; Toptan, Fatih; Alves, Alexandra CruzTi-based materials are widely used for dental and orthopaedic implant applications due to their adequate mechanical properties, corrosion behaviour and biocompatibility. However, these materials are biologically inert and display poor wear resistance. In one of the most studied processes that aims to overcome these drawbacks, Ti surfaces are often covered by anodic oxide films with the incorporation of bioactive agents such as Ca and P. Although there are several works on the tribocorrosion behaviour of MAO-treated Ti surfaces, the influence of electrolyte composition on the corrosion kinetics under sliding is yet to be fully understood. In the present work, anodic oxide films were produced on cp-Ti surfaces with different calcium acetate concentrations in the electrolyte. Tribocorrosion behaviour was investigated by reciprocating sliding tests performed in 8 g/L NaCl solution at body temperature, under potentiostatic conditions. The results showed that higher concentrations of calcium acetate had a detrimental effect on tribocorrosion kinetics, however, they resulted in less mechanical damage due to alterations in the topography and structure of the MAO layer.