Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
126 results
Search Results
Article Citation - Scopus: 1Audio-magnetotelluric (amt) studies over rajapur hot spring in west coast maharashtra, India(indian Acad Sciences, 2024) Deshmukh, Vasu; Kumar, P. V. Vijaya; Chandrasekaram, D.; Raju, Khasi; Sathishkumar, S.; Srinivas, Y.; Rao, P. B. V. SubbaIn the west coast geothermal provinces, the Rajapur hot spring, located in the southern part of western Maharashtra, is well thought to originate from the interaction of meteoric water with the granitic basement. A 3D AMT survey was conducted to determine the geo-electrical structure of the hot spring. Dimensionality analysis carried out by phase tensor analysis reveals complex subsurface 3D structures. 2D and 3D modelling have yielded three distinct resistivity layers in the Rajapur geothermal field. These layers include a moderately resistive surface layer representing weathered Deccan traps having a thickness of about 100 m, a conductive second layer with a thickness of about 100-400 m represents Kaladgi sediments and a deeper high resistive layer (0.5-1.0 km) representing granitic gneisses basement. High conductivity anomaly within the Kaladgi sediments represents a hydrothermal reservoir that is associated with faults/fractures beneath the Deccan Traps.Review Citation - WoS: 10Citation - Scopus: 14A Review on Characterization and Recyclability of Pharmaceutical Blisters(Elsevier, 2023) Capkin, Irem Yaren; Gokelma, MertolPackaging is one of the biggest sectors in the world and the use of aluminium is widespread in the packaging industry. Pharmaceutical blister packages generate a significant amount of solid waste, typically containing plastics and aluminium as thin layers. Since these packages have a complex structure with multiple layers, they are hard to recycle. A separation process of the plastic and aluminium is needed prior to recycling. Hydrometallurgical or thermal processes can be used for the separation. This work reviews the characterization of different types of blisters and the different reagents used in the separation process of the blister layers. Parameters and results of separation processes by using hydrochloric acid, formic acid, acetic acid, organic solvents, and phosphoric acid were discussed as well as the thermal degradation.Article Citation - WoS: 3Citation - Scopus: 3Effects of Different Precursors on the Aging and Electrocaloric Properties of Mn-Doped Ba0.95sr0.05tio3 Ceramics(Springer, 2023) Karakaya, Merve; Erdem, Emre; Akdoğan, Yaşar; Adem, UmutIn this study, the effects of different types of Mn precursors (MnO2 and Mn2O3) and sintering temperature on the defect dipole formation, ferroelectric aging and electrical properties were investigated by using Ba0.95Sr0.05TiO3 ceramics as the base. Both Mn precursors were substituted to the Ti-site as 1 mol% and two different sintering temperatures of 1325 and 1400 degrees C were used to study the effect of grain size. We deduced that slightly higher amounts of Mn2+ can be incorporated into the perovskite structure when MnO2 is used as the precursor, by using X-ray diffraction and electron paramagnetic resonance spectroscopy. Mn-doped samples sintered at 1325 degrees C age faster than those sintered at 1400 degrees C. Aging caused a decrease in the electrocaloric effect whereas Mn-doping increased it. This study shows that Mn precursor used for the acceptor doping affects the amount of Mn incorporated into the structure and therefore electrical properties of the resulting ceramics.Article Citation - WoS: 9Citation - Scopus: 9Cold Sintering Assisted Two-Step Sintering of Potassium Sodium Niobate (knn) Ceramics(Elsevier, 2023) Karacasulu, Levent; Ahmetoğlu, Çekdar VakıfPotassium sodium niobate (KNN) ceramics were densified using a multiple-stage sintering process in which initially applied cold sintering process (CSP) was followed by the solid-state sintering between 1100 and 1120 °C. Comparative assessments demonstrated that multi-step sintered samples yielded better properties than conventionally sintering ones. The highest relative density (94.7%) and the best electrical properties were obtained from the sample subjected to cold sintering at 120 °C/1 h using 5 wt% deionized water subsequently heat-treated at 1120 °C/2 h, resulting in a monolithic KNN ceramic having a piezoelectric coefficient of 120 pC/N. © 2023 Elsevier B.V.Article Citation - WoS: 4Citation - Scopus: 4The Peculiar Potential of Transition Metal Dichalcogenides for Thermoelectric Applications: a Perspective on Future Computational Research(American Institute of Physics, 2023) Özbal, Gözde; Sarıkurt, Sevil; Sevinçli, Haldun; Sevik, CemThe peculiar potential transition metal dichalcogenides in regard to sensor and device applications have been exhibited by both experimental and theoretical studies. The use of these materials, thermodynamically stable even at elevated temperatures, particularly in nano- and optoelectronic technology, is about to come true. On the other hand, the distinct electronic and thermal transport properties possessing unique coherency, which may result in higher thermoelectric efficiency, have also been reported. However, exploiting this potential in terms of power generation and cooling applications requires a deeper understanding of these materials in this regard. This perspective study, concentrated with this intention, summarizes thermoelectric research based on transition metal dichalcogenides from a broad perspective and also provides a general evaluation of future theoretical investigations inevitable to shed more light on the physics of electronic and thermal transport in these materials and to lead future experimental research. © 2023 Author(s).Article Citation - WoS: 3Citation - Scopus: 6Investigation of the Influence of High-Pressure Torsion and Solution Treatment on Corrosion and Tribocorrosion Behavior of Cocrmo Alloys for Biomedical Applications(MDPI, 2023) Yılmazer, Hakan; Caha, İhsan; Dikici, Burak; Toptan, Fatih; Işık, Murat; Niinomi, Mitsuo; Nakai, Masaaki; Alves, Alexandra CruzIn this study, the influence of the high-pressure torsion (HPT) processing parameters and solution treatment (ST) on the corrosion and tribocorrosion behavior of CoCrMo (CCM) alloys was investigated for possible usage in biomedical applications. The corrosion behavior of the CCM alloys was investigated by using potentiodynamic scanning (PDS) and electrochemical impedance spectroscopy (EIS) tests. Tribocorrosion tests were carried out in a reciprocating ball-on-plate tribometer at 1 Hz, 1 N load, and 3 mm stroke length for 2 h. All electrochemical measurements were performed using a potentiostat in standard phosphate-buffered saline (PBS) solution at body temperature (37 +/- 2 degrees C). The samples were characterized by using a scanning electron microscope (SEM), transmission electron microscope (TEM), optical microscope (OM), and X-ray diffraction (XRD). The deepness and width of wear tracks were examined by using a profilometer. The results showed that HPT and ST processes did not affect significantly the corrosion resistance of samples. However, the ST-treated samples had a higher material loss during sliding in standard phosphate-buffered saline (PBS) at body temperature as compared to HPT-treated samples.Article Citation - WoS: 19Citation - Scopus: 19Processing of Polymer-Derived, Aerogel-Filled, Sic Foams for High-Temperature Insulation(Wiley, 2023) Zambotti, Andrea; Ionescu, Emanuel; Gargiulo, Nicola; Caputo, Domenico; Ahmetoğlu, Çekdar Vakıf; Santhosh, Balanand; Biesuz, MattiaPorous polymer-derived ceramics (PDCs) are outperforming materials when low-density and thermal inertia are required. In this frame, thermal insulating foams such as silicon carbide (SiC) ones possess intriguing requisites for aerospace applications, but their thermal conductivity is affected by gas phase heat transfer and, in the high temperature region, by radiative mechanisms. Owing to the versatility of the PDC route, we present a synthesis pathway to embed PDC SiC aerogels within the open cells of a SiC foam, thus sensibly decreasing the thermal conductivity at 1000 degrees C from 0.371 W center dot m(-1)K(-1) to 0.243 W center dot m(-1)K(-1). In this way, it was possible to couple the mechanical properties of the foam with the insulating ability of the aerogels.The presented synthesis was optimized by selecting, among acetone, n-hexane, and cyclohexane, the proper solvent for the gelation step of the aerogel formation to obtain a proper mesoporous colloidal structure that, after ceramization at 1000 degrees C, presents a specific surface area of 193 m(2)center dot g(-1). The so-obtained ceramic composites present a lowest density of 0.18 g center dot cm(-3), a porosity of 90% and a compressive strength of 0.76 MPa.Article Citation - WoS: 20Citation - Scopus: 22Fabrication and Properties of Novel Porous Ceramic Membrane Supports From the (sig) Diatomite and Alumina Mixtures(Elsevier, 2022) Aouadja, Faycal; Bouzerara, Ferhat; Güvenç, Çetin Meriç; Demir, Mustafa M.In this paper, the manufacturing of macro-porous tubular ceramic supports for membranes is described. The novel supports are fabricated from natural diatomite and alumina raw materials using the extrusion method. The structure was analyzed by X-ray diffraction (XRD) and mercury porosimetry techniques; the presence of possible defects was investigated by scanning electron microscopy (SEM). The permeability has been measured from water flux in standard experiments. Experimental results show that the open porosity, the average pore size (APS), the pore size distribution, the strength, and the permeability of sintered supports, have been found to depend, mainly on the concentration of alumina (Al2O3) additive. Supports prepared with the addition of 10 wt.% of alumina and sintered at 1200 degrees C, can be considered as the most optimized; they have a porosity ratio of about 46%, an APS is around 7.7 mu m, a flexural strength value of about 28 MPa, and water permeability of around 15 m(3)h(-1) m(-2) bar(-1). Such materials could be of great interest in the supports fabrication for membrane application, for instance, water filtration. (C) 2021 SECV. Published by Elsevier Espana, S.L.U.Article Citation - WoS: 3Citation - Scopus: 4Development of Textured Lead-Free Nbt-Based Piezoelectric Materials in a Matrix, Synthesized by an Alternative Route, Via Templated Grain Growth(Springer, 2023) Çoban Tetik, Hatice Şule; Suvacı, Ender; Avcı, A. Murat; Adem, Umut; Karakaya, MerveIn this study, (1−x)(K0.5Bi0.5TiO3-BaTiO3)−xNa0.5Bi0.5TiO3 KBT:BT = 2:1 where x = 0.8 (KBT-BT-NBT) (001) textured lead-free piezoelectric ceramics were fabricated using BT template by templated grain growth with tape casting. Unlike the commonly used matrix preparation method, which is the calcination of all raw materials in one step, the matrix phase was prepared in a different way by first preparing KBT, BT and NBT powders separately and then by calcining the mixtures of these powders, so that effect of the matrix, synthesized by this alternative route, on texture development properties was evaluated. In addition, the effect of BT template content on the grain orientation with different sintering temperature and time, structure evolution, phase stability and piezoelectric properties were investigated to assess the materials’ actuating performance. The highest Lotgering factor of 81% was achieved for the textured ceramics with 10 wt% BT templates sintered at 1150 °C for 48 h. Compared to the one-step synthesis method, similar Lotgering factor values were obtained at lower sintering temperatures in the matrix, synthesized by the alternative 2-step method. The highest piezoelectric constant, remnant polarization, strain value and depolarization temperature were also obtained from the same sample, as ~ 190 pC/N, 30 kV/cm, 25% at 50 kV/cm and ~ 165 °C, respectively. The results show that the textured, lead free K0.5Bi0.5TiO3-BaTiO3-Na0.5Bi0.5TiO3 (KBT-BT-NBT) ceramics that are developed by using the matrix, synthesized by the alternative 2-step method, can be very promising lead-free electroceramics for high performance actuator applications.Article Citation - WoS: 10Citation - Scopus: 7Assessment of Melt Cleanliness of Secondary 5000 Aluminum Alloy Via Non-Metallic Inclusions Characterization(Springer, 2023) Li, Cong; Dang, Thien; Huang, Jinxian; Huang, Chunfa; Li, Jianguo; Friedrich, Bernd; Gökelma, MertolThe extensive energy consumption of primary aluminum production stimulates increasing need of producing primary-quality alloys with secondary sources, during which process amount of non-metallic inclusions (NMIs) in the alloy must be strictly controlled. In the present study funded by AMAP Open Innovation Research Cluster, NMIs generated during remelting a 5000 Al-Mg alloy was investigated to offer benchmarking characters of NMIs with respect to type, morphology, size, composition, and concentration. Under different remelting conditions NMIs formed in the melt ahead of solidification were concentrated using Porous Disc Filtration Apparatus (PoDFA) and characterized microstructurally and quantitatively. Investigated conditions included heating cycle, organic contaminations, and refractory materials. Results suggested oxide films and cuboid particles as typical oxides with, respectively, different compositions. The amount of formed oxides declined with the increase of heating rate. With respect to aluminum carbide (Al4C3), organic contaminations were confirmed to lead to an increased amount of its formation. The carbon-containing refractory material contributed more significantly than organic contaminations on the formation of Al4C3 at melt temperatures over 760 & DEG;C. Formulas were derived based on trial results to enable translation of NMIs PoDFA value [mm(2)/kg] into their mass fraction [ppm] in the melt.