Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
7 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 10Enhanced Light–matter Interaction in a Hybrid Photonic–plasmonic Cavity(Springer, 2021) Gökbulut, Belkıs; Özçelik, Serdar; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammer; İnci, Mehmet Naci; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyStrongly concentrated optical fields around a metal nanoparticle in the close vicinity of a dipole noticeably facilitate dramatic changes in the localized density of states due to hybrid photonic–plasmonic mode couplings as compared to that of the pure cavity mode fields. Significant variations of the field intensity in the presence of the metal nanoparticle elucidate enhanced light–matter interaction in a hybrid structure. The enhancement factor of the light–matter interaction is studied through the single-atom cooperativity parameter, which is directly proportional to the ratio of the fluorescence lifetimes of the off-resonant and on-resonant emission. A compact and cost-effective hybrid device, which includes a microfiber cavity, supporting whispering gallery modes, and a well-defined solid nanostructure, consisting of a gold nanoparticle core, overcoated by a silica shell, and decorated with CdS/CdSe quantum dots, is demonstrated to offer an outstanding potential for the enhancement of light–matter interaction. Surface plasmons of a gold nanoparticle, placed inside a hollow cylindrical nanostructure at the surface of a microfiber, are activated upon excitation of the dipoles of the quantum emitters, which are on-resonance with the whispering gallery mode. Time-resolved experiments demonstrate that the single-atom cooperativity parameter of the quantum dots is enhanced by a factor of about 4.8 in the presence of the gold nanoparticle being simultaneously in strong interaction with the cavity mode field and the metal nanoparticle’s surface plasmons.Correction Correction To: Enhanced Light–matter Interaction in a Hybrid Photonic–plasmonic Cavity(Springer, 2022) Gökbulut, Belkıs; İnanç, Arda; Demir, Mustafa Muammer; Özçelik, Serdar; Özçelik, Serdar; İnci, Mehmet Naci; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyIn this article the statement in the Funding information section was incorrect. The correct Funding information is as follows. ‘Dr Belkıs Gökbulut acknowledges TUBITAK for the financial support provided under Contract Number 120F323’.Article Citation - WoS: 3Citation - Scopus: 6Hybrid Photonic-Plasmonic Mode-Coupling Induced Enhancement of the Spontaneous Emission Rate of Cds/Cdse Quantum Emitters(Elsevier, 2022) Gökbulut, Belkıs; Özçelik, Serdar; Topçu, Gökhan; Özçelik, Serdar; Demir, Mustafa Muammer; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of Technologyn this paper, a hybrid photonic-plasmonic resonator, which comprises an electrospun polymer fiber with a micrometer diameter and a core/shell nanostructure with a gold nanoparticle core, is constructed to investigate the dynamics of the coupled spontaneous emission of CdS/CdSe quantum dots (QDs). The gold nanoparticle core; covered with a silica shell, anchored with individual CdS/CdSe QDs, is placed inside a hollow cylindrical nanocavity formed on the surface of the microfiber to enable integration of the optical mode with the plasmonic effect, which is induced by the localized surface plasmons of the metal nanoparticle being present in the vicinity of the dipoles. The spontaneous emission rate of the QDs, coupled into the hybrid photonic-plasmonic mode, is measured to enhance by a factor of 23 via a time-resolved experimental technique. This result suggests that the regeneration of the optical mode-field inside the photonic-plasmonic resonator through the interaction of the dipoles with the localized surface plasmons of a metal nanoparticle strongly enhances the density of the electromagnetic states of the quantum emitters to facilitate an enhanced spontaneous emission within the host medium of the proposed polymer based-photonic structure.Article Citation - WoS: 5Citation - Scopus: 7Effect of High Salinity and Temperature on Water-Volcanic Rock Interaction(Springer, 2021) Gören, Ayşegül Yağmur; Gören, Ayşegül Yağmur; Topçu, Gökhan; Demir, Mustafa Muammer; Demir, Mustafa Muammer; Baba, Alper; Baba, Alper; 03.07. Department of Environmental Engineering; 03.03. Department of Civil Engineering; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyIn order to understand the processes occurring in natural hydrothermal systems, it was carried out a series of water-volcanic rock interaction studies in the laboratory and an intermediate volcanic rock samples from geothermal production wells in Tuzla geothermal field (TGF) in western Turkey. A high-pressure autoclave was used to conduct water-rock interaction experiments under similar conditions of the field. Rainwater and seawater were treated with volcanic rocks at 140 degrees C (reservoir temperature) and 4.5 bar pressure. The change in the ionic content of the resulting fluids was examined in terms of the type of volcanic rocks and mineral saturation index. The results indicate that talc and diopside minerals in geothermal systems may cause scaling at high temperatures depending on the geothermal fluid and pH.Article Citation - WoS: 3Citation - Scopus: 5Plasmon-Induced Spectral Tunability of Perovskite Nanowires(Elsevier, 2021) Gökbulut, Belkıs; Topçu, Gökhan; Demir, Mustafa Muammer; İnci, Mehmet Naci; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyIn this paper, plasmon-assisted spectral tunability in random media, composed of Perovskite (CsPbBr3) nanowires surrounded by Au nanoparticle clusters in polystyrene matrix, is achieved. The interaction between the surface plasmons and the quantum sources is observed to generate photoluminescence from the higher excited state energy levels of the excited semiconductor nanowires, which results in a blueshifted fluorescence emission of 50 nm. The localized surface plasmon properties are also determined to be tuned by plasmonic pumping of the quantum sources at different resonant frequencies. Thus, the first observation of the tunable blueshifted fluorescence emission of the semiconductor nanocrystals surrounded by plasmonic nanoparticle aggregates is achieved. The dramatic changes in the spectral profiles of the fluorescent nanowires are attributed to be due to the fast dynamics surface enhanced fluorescence mechanism.Article Citation - WoS: 21Citation - Scopus: 24Colloidal Films of Sio2 in Elastomeric Polyacrylates by Photopolymerization: a Strain Sensor Application(Elsevier, 2020) İnci, Ezgi; Demir, Mustafa Muammer; Topçu, Gökhan; Demir, Mustafa Muammer; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyThin layer SiO2 colloidal films show angle-dependent coloration (iridescence) based on constructive interference, rather than absorption, without the existence of pigments. The transfer of thin layered colloidal film into a transparent elastomeric matrix maintaining its color may allow the fabrication of colorimetric strain sensors. In this study, trilayer SiO2 colloidal films were prepared by Langmuir-Blodgett deposition using a binary solvent system (chloroform/methanol) and this structure is successfully transferred into poly(ethylene glycol) phenyl ether acrylate elastomer via lateral capillary force. The resulting composite films exhibit iridescence depending on the particle size, therefore, film thickness as similar in mere colloidal films with a slight difference due to change in efficient refractive index (neff). Uniaxial extension of the composite film up to 50 % strain causes a remarkable linear shift in reflection signal from 568 to 496 nm. The change in thickness of the composite film accordingly intercolloidal distance normal to the application of mechanical stretching causes variation of the reflection of light.Article Citation - WoS: 9Citation - Scopus: 10Polymeric Planar Microcavities Doped With a Europium Complex(MDPI, 2020) Lova, Paola; Demir, Mustafa Muammer; Olivieri, Marco; Emirdağ Eanes, Mehtap; Surace, Alba; Topçu, Gökhan; Emirdağ Eanes, Mehtap; Demir, Mustafa Muammer; Comoretto, Davide; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyOrgano-metallic europium complex tetrakis (dibenzoyl methide) triethylammonium (EuD(4)TEA) shows a sharp emission spectrum, which makes it interesting for photonic applications. In this work, we embedded it into all-polymeric planar microcavities and investigated the effect of the photonic environment on its emission spectrum. To this end, submicron-sized EuD(4)TEA crystals were loaded into a blend of polystyrene and carboxylic terminated polystyrene matrix, which served to stabilize the emitter in the polymer and to make the composite processable. The new composite was then casted by spin-coating as a defect layer in a polymeric planar microcavity. Spectroscopic studies demonstrate that fine spectral tuning of the cavity mode on the sharp organometal luminescence is possible and produces spectral redistribution of the fluorophore emission, along with a remarkable cavity quality factor.