Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
6 results
Search Results
Article Citation - WoS: 61Citation - Scopus: 64Electrospun Gelma Fibers and P(hema) Matrix Composite for Corneal Tissue Engineering(Elsevier Ltd., 2021) Arıca, Tuğçe A.; Güzelgülgen, Meltem; Yıldız, Ahu Arslan; Demir, Mustafa MuammerThe development of biocompatible and transparent three-dimensional materials is desirable for corneal tissue engineering. Inspired from the cornea structure, gelatin methacryloyl-poly(2-hydroxymethyl methacrylate) (GelMA-p(HEMA)) composite hydrogel was fabricated. GelMA fibers were produced via electrospinning and covered with a thin layer of p(HEMA) in the presence of N,N?-methylenebisacrylamide (MBA) as cross-linker by drop-casting. The structure of resulting GelMA-p(HEMA) composite was characterized by spectrophotometry, microscopy, and swelling studies. Biocompatibility and biological properties of the both p(HEMA) and GelMA-p(HEMA) composite have been investigated by 3D cell culture, red blood cell hemolysis, and protein adsorption studies (i.e., human serum albumin, human immunoglobulin and egg white lysozyme). The optical transmittance of the GelMA-p(HEMA) composite was found to be approximately 70% at 550 nm. The GelMA-p(HEMA) composite was biocompatible with tear fluid proteins and convenient for cell adhesion and growth. Thus, as prepared hydrogel composite may find extensive applications in future for the development of corneal tissue engineering as well as preparation of stroma of the corneal material. © 2020 Elsevier B.V.Article Citation - WoS: 14Citation - Scopus: 17Spectrophotometric Characterization of Plasticizer Migration in Poly(vinyl Chloride)-Based Artificial Leather(Elsevier Ltd., 2021) Akkuş Altındağ, İffet; Akdoğan, YaşarPlasticized polyvinyl chloride (PVC) is one of the most commonly used material in the manufacture of artificial leather because of its flexibility, high durability and low cost. While hundreds of plasticizers have been produced to obtain PVC films and artificial leathers, it is important to choose the correct plasticizer to produce the desired products. Therefore, here five non-phthalate type plasticizers with three levels (40 phr, 60 phr and 80 phr); trioctyl trimelliate (TOTM), tributyl trimelliate (TBTM), dioctyl terephthalate (DOTP), dioctyl adipate (DOA) and dioctyl succinate (BIO) were used to prepare plasticized PVC films. They were studied in terms of their compabilities with PVC polymer chains, and their effects on mechanical properties of PVC films. Although, linear plasticizers e.g. BIO and DOA have higher compabilities with PVC, a branched plasticizer e.g. TOTM showed higher mechanical properties. Moreover, a new spectrophotometric method for determination of plasticizer migration from PVC polymer matrix to the surface of artifical leather was developed. According to lightness change on the surface of PVC artifical leather before and after heat treatment at 70 °C, the migration rates of used plasticizers increase in this order: TOTM < TBTM < DOTP < BIO < DOA. © 2020 Elsevier B.V.Article Citation - WoS: 19Citation - Scopus: 22Enhanced Methylene Blue Removal Efficiency of Tio2 Embedded Porous Glass(Elsevier Ltd., 2021) Ertuş, E.Burak; Vakıfahmetoğlu, Çekdar; Öztürk, AbdullahA porous glass (PG) embedded with titanium dioxide (TiO2) was produced via impregnation of the PG with Titanium (IV) Isopropoxide solution followed by crystallization. N2 sorption analyses revealed that the specific surface area (SSA) and total pore volume of the PG reached to 358 m2/g and 0.370 cm3/g, respectively. The adsorption capacity of methylene blue (MB) for the glasses was measured in the dark, instead the photocatalytic MB removal efficiency was evaluated by the degradation of MB under UV light illumination using a UV–vis spectrometer. The MB removal efficiency of the TiO2 synthesized anatase powder was only 32.3 % whereas, for TiO2 embedded PG (TiPG) it was 91.6 %, and nearly complete (> 99 %) efficacy was achieved for TiO2 embedded alkaline leached PG (TiPG-AL) under UV illumination 3 h period. Better MB removal efficiency was attributed to high SSA and dispersion of nano size anatase TiO2 crystallites within the porous structure. © 2020 Elsevier LtdArticle Citation - WoS: 40Citation - Scopus: 44Plasmon-Enhanced Photocatalytic and Antibacterial Activity of Gold Nanoparticles-Decorated Hematite Nanostructures(Elsevier Ltd., 2021) Emre, Alp; İmamoğlu, Rizvan; Savacı, Umut; Turan, Servet; Kazmalı, M. Kürşat; Genç, AzizHematite (alpha-Fe2O3) nanoparticles have received significant attention from the researchers due to their favorable and desirable properties in diverse applications. In the present study, single-crystalline hematite pseudo-nanocubes and porous nanorods were synthesized by the hydrothermal route without the usage of any surfactant agents, which were then decorated with gold nanoparticles hidrothermally in an aqueous solution in order to increase the solar energy conversion efficiency. The photocatalytic activities of synthesized nanoparticles were studied against Rhodamine B (RhB) under the illumination of AM 1.5 solar simulator. The excellent photocatalytic efficiency was obtained by changing morphological features of hematite nanostructures, along with the photocatalytic performance enhancement up to 25% thanks to the surface plasmon resonances for the gold nanoparticles-decorated hematite nanostructures. For instance, gold-nanoparticles decorated hematite pseudo-nanocubes almost completely degraded all the RhB after 30 min of illumination. It was also observed that all hematite products, with and without gold decoration, exhibited an impressive antibacterial effect and showed the lethal effect in E.coli. The same nanoparticles being photocatalytically active for organic pollutant degradation and having antibacterial effect may have a good potential for waste water remediation applications. (C) 2020 Elsevier B.V. All rights reserved.Article Citation - WoS: 103Citation - Scopus: 110Cold Sintering of Ceramics and Glasses: a Review(Elsevier Ltd., 2020) Ahmetoğlu, Çekdar Vakıf; Karacasulu, LeventTraditionally ceramic artifacts are processed at high temperatures (> 1000 degrees C) by classical sintering techniques such as solid state, liquid phase and pressure-assisted sintering. Recently, inspired from the geology, novel sintering approaches that allow the densification of ceramic components at relatively low temperatures <= 400 degrees C have been proposed. While initial efforts for such low temperature densification concept were developed in the mid-70s, the topic has become increasingly prominent in the last decade. Currently, these low temperature methods can be classified into four main groups: (i) hydrothermal reaction sintering (HRS), (ii) hydrothermal hot pressing (HHP), (iii) pressure-assisted densification techniques: room-temperature densification (RTD), cold sintering (CS), warm press (WP), and finally no-pressure assisted method called (iv) reactive hydrothermal liquid phase densification (rHLPD). Above named techniques are commonly assisted by an aqueous solution used as either reactant or transient liquid phase to assist densification. Starting from the background in traditional sintering processes, this review aims to explore in depth the existing literature about low temperature densification approaches along with their advantages & disadvantages, and probable application areas.Article Citation - WoS: 13Citation - Scopus: 16Electrocaloric Properties of Ba0. 8sr0. 2ti1-Xzrxo3 (0? X? 0.1) System: the Balance Between the Nature of the Phase Transition and Phase Coexistence(Elsevier Ltd., 2020) Şanlı, Keriman; Adem, UmutWe investigate the electrocaloric effect of Ba0.8Sr0.2Ti1-xZrxO3 (0 ≤ x ≤ 0.1) system by comparing the electrocaloric temperature change (ΔT) of different compositions belonging to the different regions of the phase diagram. We show that as the amount of Zr increases, electrocaloric temperature change initially decreases as the phase transition gets diffuse then increases again as the composition of the samples are located closer to the critical point where different ferroelectric phases coexist. Since the critical point is reached at relatively low Zr substitution levels (i.e. around x = 0.07), the phase transition doesn't get too diffuse and thefore the compositions between x = 0 and x = 0.10 (which contains higher Zr than the critical point composition) have comparable ΔT values. Electrocaloric efficiency of these compositions (x = 0.03, 0.05 and 0.07) is around 0.20 K mm/kV at 20 kV/cm. We discuss the results in terms of the balance between the nature of the phase transition and proximity to the critical point, based on the phase diagram.