Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
4 results
Search Results
Article Citation - WoS: 169Citation - Scopus: 177Thin Film Microextraction: Towards Faster and More Sensitive Microextraction(Elsevier Ltd., 2019) Ölçer, Yekta Arya; Eroğlu, Ahmet Emin; Tascon, Marcos; Eroğlu, Ahmet Emin; Boyacı, Ezel; 04.01. Department of Chemistry; 04. Faculty of Science; 01. Izmir Institute of TechnologyThin film microextraction (TFME) is an analytical tool that has been proven to be suitable for integrated sampling and sample preparation of a wide variety of routine and on-site applications. Compared to the traditional microextraction techniques, the most important advantage of TFME is its enhanced sensitivity due to the relatively larger extractive phase spread over a larger surface area. The technique, in this way, facilitates fast extraction kinetics and high extractive capacity. Moreover, TFME offers high versatility for device development over classical SPME technologies due to the plethora of available extractive phases, coating methods and geometry options. The goal of this review is to provide a comprehensive summary of the contemporary advances in this exciting field covering novel extractive phases, technological and methodological developments, and relevant cutting-edge applications. Finally, a critical discussion of the future trends on TFME is also presented. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 44Citation - Scopus: 53Smart Phone Assisted Detection and Quantification of Cyanide in Drinking Water by Paper Based Sensing Platform(Elsevier Ltd., 2017) İncel, Anıl; Akın, Osman; Demir, Mustafa Muammer; Yıldız, Ümit Hakan; Demir, Mustafa Muammer; Çağır, Ali; Yıldız, Ümit Hakan; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyAn organometallic dye, europium tetrakis dibenzoylmethide triethylammonium (EuD4TEA) and gold nanoparticles (Au NPs) impregnated paper based sensor platform have been utilized for development of fluorescence turn-on cyanide assay in aqueous media. The ordinary filter paper with 6 μ m pore size were employed as solid support that facilitates impregnation of EuD4TEA and gold nanoparticles and provides durability. Detection mechanism relying on two processes (i) dissolution of gold nanoparticles causing fluorescence recovery and (ii) ligand exchange of triethyl amine with CN group stimulating cyanide specific fluorescence enhancement. The paper platform exhibit naked eye distinguishable color transition upon CN− addition from 10−2 to 10−12 M. To standardize the methodology a homemade image processing algorithm has been developed that enabling calibration of color change and quantify CN− concentration. The described algorithm is applicable to Android smart phones and facilitate transforming these devices into a quantitative cyanide detector. The overall methodology provides instrument free cyanide detection and therefore rapid control of water quality and safety at off-field conditions.Article Citation - Scopus: 2Enthalpy-Driven Selective Loading of Cdse0.75s0.25 Nanoalloys in Triblock Copolymer Polystyrene-B(Elsevier Ltd., 2016) Aşkın, Görkem; Çeçen, Volkan; Demir, Mustafa Muammer; Özçelik, Serdar; Demir, Mustafa Muammer; Özçelik, Serdar; 04.01. Department of Chemistry; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 04. Faculty of Science; 01. Izmir Institute of TechnologyCdSe0.75S0.25 nanoalloys were blended with asymmetric triblock copolymer of polystyrene-b-polyisoprene-b-polystyrene(PS-SIS) in tetrahydrofuran. The fraction of styrene block varies from 14 to 22% with respect to isoprene by mass. The morphology of the copolymer cast film experiences a phase change from cylinder to lamella. CdSe0.75S0.25 nanoalloys were prepared by two-phase method. The surface of the nanoalloys was capped by either oleic acid (OA) or n-tri-octylphosphonic acid (TOPO) in situ. The mean diameter of the alloyed particles is around 12 nm in both systems. The chemical nature of the nanoalloy surface was found to influence the dispersion of the particles over polymer volume. The size of the nanoalloy domains in PS is 50 nm, on average, consisting of approximately 0.7 wt% nanoalloys. However, the size of the nanoalloy domains is smaller when they are loaded into PS-SIS. The structure formation is predominantly determined by enthalpic compatibilization. Atomic force microscopy results suggest that the nanoalloys capped with TOPO sequester into PS-rich domains and enlarge the domain. On the other hand, the ones capped with OA prefer to locate in polyisoprene domains. The increase of particles over 1.0 wt% distorts the lamella structure.Article Citation - WoS: 36Citation - Scopus: 36Surfactant-Assisted Formation of Organophilic Ceo2 Nanoparticles(Elsevier Ltd., 2012) Tunusoğlu, Özge; Muñoz-Espí, Rafael; Demir, Mustafa Muammer; Demir, Mustafa Muammer; 03.09. Department of Materials Science and Engineering; 03. Faculty of Engineering; 01. Izmir Institute of TechnologyWe report a simple one-pot method to prepare organically functionalized CeO 2 nanoparticles by controlled chemical precipitation. The particles were nucleated by mixing aqueous solutions of Ce(NO 3) 3·6H 2O and ammonia at room temperature. Different small organic molecules were chosen as capping agents and injected into the reaction medium at the beginning of the synthesis: 3-(mercaptopropyl) trimethoxy silane (MPS), hexadecyltrimethyl ammonium bromide (CTAB), 3-mercapto propionic acid (3-MPA), and thioglycolic acid (TGA). The resulting nanocrystals were quasi-spherical and had a narrow mean size distribution with an average size smaller than 10nm. Dynamic nuclear polarization enhanced NMR (DNP-NMR) and FTIR measurements suggested a chemical grafting of the surfactant and a homogeneous surface modification. The colloidal stabilities were characterized by dynamic light scattering and zeta potential measurements. The stabilization by aliphatic groups was tested with a frequently used hydrophobic monomer, methyl methacrylate. According to the results, CTAB is the most effective of the used stabilizing surfactant. The mechanism of formation of the organophilic CeO 2 nanoparticles is discussed.