Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/4719

Browse

Filters

2016 - 201932020 - 20231

Settings

Has files: NoWoS Q: search.filters.wosQuartile.N/A

Search Results

Now showing 1 - 4 of 4
  • Conference Object
    Citation - WoS: 1
    Citation - Scopus: 1
    Assessment of Separation and Agglomerationt Tendency of Non-Metallic Inclusions in an Electromagnetically Stirred Aluminum Melt
    (Springer international Publishing Ag, 2023) Li, Cong; Dang, Thien; Gokelma, Mertol; Zimmermann, Sebastian; Mitterecker, Jonas; Friedrich, Bernd
    Presence of non-metallic inclusions (NMIs) reduces surface quality and mechanical properties of aluminum products. The development of good NMIs removal practices relies on the understanding of inclusion behaviors with respect to separation and agglomeration particularly in the turbulent flow. In the scenario of electromagnetically induced recirculated turbulent flow, the concerned behaviors of inclusions with different sizes have rarely been investigated experimentally. In the presented study funded by AMAP Open Innovation Research Cluster, reference materials were prepared with uniformly distributed NMIs (SiC and MgAl2O4) via an ultrasoundinvolved casting route. Reference materials were charged into an aluminum melt where turbulent flow was promoted via electromagnetic force. Microscopical analysis shows non-significant agglomeration tendency of SiC, MgAl2O4, and TiB2 inclusion. Time-weight filtration curve, PoDFA, and Spark Spectrometer results suggest a strong dependence of separation rate on particle size. Analytical models were established to estimate the collision rate of particles and to evaluate separation probability of different sized particles.
  • Research Project
    Darbe altında ışıma yapan polimerik filmler ve lif demetlerinin üretilmesi ve uygulamaları
    (2016) Demir, Mustafa M.; İncel, Anıl
    Tribolüminesans (TL) malzemeler darbe altında ışıma özelliğine sahip kristal yapılardır. Bu projede, organik ve metal yapıları bir arada bulunduran iki TL kristal (EuD4TEA ve Cu(NCS)(py)2(PPh3)) elde edilmiş ve mikrometre büyüklüğündeki tanecikler PMMA (poli metil metakrilat), PS (polistiren), PU (poliüretan) ve PVDF (polivinilflorür) saydam özellikteki polimerler kullanılarak ince-katmanlı film, elektrospun lif demetleri ve nano boyutundaki tanecikler elde edilen matrisler ile entegre edilmiştir. Kompozit malzemelerin elde edilmesi için iki farklı deneysel metod geliştirilmiştir: i) yükleme işlemi ve ii) yüzeye depolama işlemi. Kompozit malzemelerin TL performansları bu tez için özel tasarlanan atış kule sistemi ile ölçülmüştür. Bunun yanı sıra, atomik kuvvet mikroskobu (AFM), taramalı elektron mikroskobu (SEM) polimerlerin ve kompozit malzemelerin topografik ve morfolojik özellklerini değerlendirmek için kullanılmıştır. Ayrıca, flüoresans mikroskobu kullanılarak kompozit malzemelerin emisyon sırasındaki renk sinyalleri belirlenmiştir. Son olarak piezoelektrik özellikleri osiloskop kullanılarak belirlenmiştir. Tüm bu cihazlardan elde edilen sonuçlar değerlendirildiğinde, deneysel prosedür, kristal taneciklerin boyutları, polimer malzemenin formu ve yüzey özelliği, kullanılan kristallerin kompozit içindeki miktarı bu çalışmada temel parametreler olarak belirlenmiştir. PU esaslı elde edilen film ve lif demeti kompozitler PMMA, PS, ve PVDF esaslı kompozitlerden daha iyi sonuç göstermiştir. Bunun nedeni olarak, film esaslı kompozitler için ince katmanlı PU filmin daha engebeli ve saydam bir yüzey olması; lif esaslı kompozitler için elektrospun PU liflerin daha küçük yapılardan oluşması, tüm bunlara ek olarak PU’nın kimyasal olarak TL özellikteki iki kristalle kimyasal etkileşim oluşturulması gösterilebilir.
  • Conference Object
    Development of Graphene Nanoplatelets Reinforced Aluminium Matrix Nanocomposites by a Combination of Semi-Solid Stirring and Ultrasonic Treatment
    (European Conference on Composite Materials, 2016) Kandemir, Sinan; Aydoğan, Yücel
    Graphene Nanoplatelets (GNPs) consisting of graphene layers with a thickness less than 100 nm have recently emerged as a promising reinforcement type owing to their excellent physical and mechanical properties to improve mechanical properties of alloys beyond ceramic nanoparticles. Although there are numerous studies on GNPs reinforced polymer matrix composites in the literature, the number of studies related to the incorporation of GNPs in metal matrices is limited. It is a challenging task to incorporate and uniformly distribute GNPs into liquid metals due to their poor wettability and large surface-to-volume ratio. The purpose of this study is to effectively disperse GNPs into liquid aluminium. 0.5 wt.% GNPs with an average thickness of 50-100 nm and size of 5 ?m were first incorporated into A360 aluminium alloy under semi-solid stirring, and then the composite was ultrasonically treated in fully liquid state. The microstructural investigation of the nanocomposites by optical and scanning electron microscopy may suggest that relatively uniform distribution and effective deagglomeration of GNPs in the matrix were achieved. The hardness of the GNPs reinforced nanocomposites increased in comparison with that of semi-solid stirred and ultrasonically processed A360 alloy without reinforcement, indicating the potential of GNPs for strengthening metals. © 2016, European Conference on Composite Materials, ECCM. All rights reserved.
  • Conference Object
    Reversible Energy Transfer Between a Single Defect in Hbn and Graphene
    (OSA - The Optical Society, 2019) Özçeri, Elif; Arı, Ozan; Balcı, Sinan; Kocabaş, Coşkun; Ateş, Serkan
    We present a reversible energy transfer between a single defect in hBN and graphene. Dynamic control of Fermi level of graphene results in switching on and off single photon emission from a single quantum emitter. © OSA 2019 © 2019 The Author(s)