Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
5 results
Search Results
Article Citation - WoS: 40Citation - Scopus: 44Geological and Hydrogeochemical Properties of Geothermal Systems in the Southeastern Region of Turkey(Elsevier Ltd., 2019) Baba, Alper; Şaroğlu, Fuat; Akkuş, I.; Özel, Nedret; Yeşilnacar, Mehmet İrfan; Nalbantçılar, Mahmut Tahir; Demir, Mustafa Muammer; Gökçen, Gülden; Arslan, Ş.; Dursun, N.; Uzelli, Taygun; Yazdani, HamidrezaThe Anatolia region is one of the most seismically active regions in the world. It has a considerably high level of geothermal energy potential thanks to its geological and tectonic settings. The Southeastern Anatolia Region (GAP) is located in the south of Bitlis-Zagros Suture Zone (BZSZ) which is in the Arabian foreland. During the neotectonic period, the folded structures have been developed under the influence of tectonic compression from the Upper Miocene in the GAP Region where it is closely related to active tectonics. These tectonic activities produce more geothermal resources. Few studies have been carried out in this region for geothermal energy. Limited portions of the geothermal resources have been used both for thermal tourism and greenhouses in the GAP region. The aim of this study is to determine geological, tectonic and hydrogeochemical properties of a geothermal system in the GAP Region. The result indicates that the surface temperatures of geothermal fluids are from 20 to 84.5 °C A large number of abandoned oil wells, whose temperature reaches 140 °C, are found in the region. Also, hydrogeochemical results show that deep circulated geothermal fluids are enriched with Na-Cl and shallow geothermal system fluids have Na−HCO 3 and Ca-SO 4 characters because of cold water mixing and water-rock interaction. Cold waters are generally of Ca-Mg−HCO 3 and Ca−HCO 3 type. Cation geothermometers were used for determining reservoir temperature of the geothermal resources in the region. The results show that the reservoir temperature of these geothermal resources ranges from 50 °C to 200 °C. The isotope data (oxygen-18, deuterium and tritium) suggests that geothermal fluid is formed by local recharge and deep circulation.Article Citation - WoS: 13Citation - Scopus: 16The Injection of Co2 To Hypersaline Geothermal Brine: a Case Study for Tuzla Region(Elsevier Ltd., 2019) Topçu, Gökhan; Koç, Gonca A.; Baba, Alper; Demir, Mustafa MuammerScaling is a serious issue for geothermal power plants since it remarkably decreases the harvesting of energy. The reduction of pH by organic acids whose structure is close to CO2 for instance formic acid has been an effective solution for the minimization of scaling. Herein, the effect of CO2 injection on the formation of scaling particularly metal-silicates was investigated for the model case of Tuzla Geothermal Field (TGF) located in the northwest of Turkey. CO2 has an acidic character in aqueous systems because it leads to the formation of carbonic acid. The injection of 20.6 m3/s CO2 (approximately 88 ppm) to hypersaline brine of TGF is a promising green approach for both mitigation of scaling by reducing pH from 7.2 to 6.2 at the well-head and the minimization of potential corrosion compared to the use of formic acid (55 ppm).Article Citation - WoS: 21Citation - Scopus: 27Increasing Solubility of Metal Silicates by Mixed Polymeric Antiscalants(Elsevier Ltd., 2019) Topçu, Gökhan; Çelik, Aslı; Kandemir, Ali; Baba, Alper; Şahin, Hasan; Demir, Mustafa MuammerThe increase of silicate solubility is a big challenge for both hot and cold water because it reduces the deposition of metal silicates frequently observed in such systems and causes operational obstacles. The deposition of silicate coats the inner surface of the pipelines in an uncontrolled manner and reduces the harvesting of energy from brines. In this work, the solubility performance of two commercial water-soluble polymeric agents (poly(ethylene glycol) (PEG) and poly(vinyl alcohol) (PVA)) of various molecular weights employing dosage from 25 to 100 mg/L was examined. Along with dispersant-type antiscalant, poly(acrylamide) (PAM), poly(vinylsulfonic acid, sodium salt) (PVSA), and poly(vinylphosphonic acid) (PVPA) having chelating acidic groups were employed. Metal silicate deposits were obtained artificially in the lab-scale pressurized reactor. The experimental conditions employed were quite similar to a model power plant located in Çanakkale, Turkey. The concentration of dissolved silica was increased from 130 to 420 mg/L when 100 mg/L PEG 1500 and 25 mg/L PVSA were employed as a mixture. For the atomic-level understanding of the interaction of chelating groups with metal cations, DFT calculations were performed too.Article Citation - WoS: 13Citation - Scopus: 16Experimental Modeling of Silicate-Based Geothermal Deposits(Elsevier Ltd., 2017) Çelik, Aslı; Topçu, Gökhan; Baba, Alper; Akdoğan, Yaşar; Şentürk, Ufuk; Demir, Mustafa MuammerScaling by metal silicates represents a major obstacle for geothermal systems. A composition that enables the fabrication of artificial deposits is necessary for the rapid testing of potential inhibitors. In this work, artificial deposits were synthesized by employing experimental conditions similar to those in the Tuzla Geothermal Field in Turkey. Although refluxing enabled the formation of a precipitate that was similar to naturally formed deposits in color and texture, their elemental composition and morphology showed a mismatch. An autoclave enabled the production of a precipitate that more closely resembled naturally formed deposits in color, texture, elemental composition, and structure.Article Citation - WoS: 30Citation - Scopus: 36Hydrogeological Properties of Hyper-Saline Geothermal Brine and Application of Inhibiting Siliceous Scale Via Ph Modification(Elsevier Ltd., 2015) Baba, Alper; Demir, Mustafa Muammer; Koç, Gonca A.; Tuğcu, CelalScaling is a major obstacle in harnessing of geothermal energy from the geothermal resources. This paper presents a case study for inhibition of metal silicate scaling using formic acid, harvesting more energy in particular case of Tuzla Geothermal Field (TGF), located on Biga Peninsula, in the northwestern of Turkey. TGF is 5. km far from Aegean Sea and 80. km south of Çanakkale. Geothermal fluid of TGF has high salinity (EC. > 91. mS/cm) and medium temperature (reservoir temperature is 173. °C). The acidification of high-salinity brine to mitigate silicate scaling is examined. Results of the study showed that a compromise between scaling and corrosion is achieved by reducing pH of brine to <6 using 55. ppm formic acid.