Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
4 results
Search Results
Article Citation - WoS: 11Citation - Scopus: 11Enhanced Electrocaloric Effect of P(vdf-Trfe) Nanocomposites With Ca and Sn Co-Doped Batio3 Particles(Elsevier, 2023) Tokkan, Melike; Demir, Mustafa M.; Adem, UmutWe report on the enhancemenent of electrocaloric effect in solution cast polymer nanocomposites based on Poly (vinylidene fluoride-co-trifluoroethylene) [P(VDF-TrFE) 55-45] with Ca and Sn co-substituted BaTiO3 ceramic fillers (Ba0.94Ca0.06Ti0.925Sn0.075O3, BCST). Saturated hysteresis loops and normal ferroelectric behaviour of the copolymer-based nanocomposites-as opposed to the relaxor ferroelectric nature of the terpolymer-based ones-allow the utilization of the indirect method to estimate the electrocaloric properties. Both the dielectric constant and electrocaloric temperature change (AT) increases as the particle content increases. Maximum adiabatic temperature change was obtained as 6.96 K under 900 kV/cm for the 10 vol % BCST containing polymer composite around the Curie temperature of the copolymer (70 degrees C). This relatively large electrocaloric strength is slightly lower than those obtained for terpolymer-based nanocomposites.Article Ferroelectricity of Ca9fe(po4)7 and Ca9mn(po4)7 Ceramics With Polar Whitlockite-Type Crystal Structure(Sivas Cumhuriyet Üniversitesi, 2020) Adem, UmutCa9Fe(PO4)7 is a member of the double phosphate family having polar whitlockite-type crystal structure. The phase transition from the room temperature polar R3c to the high temperature non-polar R c phase has been called a ferroelectric phase transition using complementary experiments such as temperature dependent second harmonic generation and dielectric constant measurements however no ferroelectric hysteresis measurement has been reported. In order to be able to call these polar materials ferroelectric, measurement of a saturated ferroelectric hysteresis loop is necessary to demonstrate that the electrical polarization of these materials is switchable. In order to realize this goal, we have synthesized Ca9Fe(PO4)7 as well as structurally identical Ca9Mn(PO4)7 using solid state synthesis. Crystal structure of the ceramics were confirmed using Rietveld refinement of the x-ray diffraction (XRD) patterns. Differential scanning calorimetry (DSC) measurements revealed phase transition temperatures of 848 and 860 K for Ca9Fe(PO4)7 and Ca9Mn(PO4)7, respectively. Our ferroelectric hysteresis measurements and current electric field loops (I-E) derived from the hysteresis loops showed that the loops cannot be saturated and the direction of the electrical polarization of both materials cannot be switched up to the largest applied electric field of 100 kV/cm. Possible origins of this behaviour are discussed.Article Citation - WoS: 3Citation - Scopus: 4Enhancement of the Electrocaloric Effect in Pbzr0.7ti0.3o3 Ceramics Via La Doping: Driven by Phase Co-Existence or Defect Effects?(Elsevier, 2022) Gözüaçık, Namık Kemal; Bayır, Mustafa Çağrı; Okatan, Mahmut Barış; Mısırlıoğlu, I. Burç; Alkoy, Sedat; Menşur Alkoy, EbruLattice defects and their effects have been pivotal in studies of phase transitions in a wide range of materials. Introduction of such defects into a ferroelectric material through doping of secondary elements can be tailored towards specific applications but the mechanism through which the bulk properties change is seldom scrutinized. Here we study the effect of systematic La substitution into PbZr0.7Ti0.3O3 (PZT 70/30) ceramics whereby we analyzed the temperature dependent properties and estimated the temperature changes that could be induced upon application of an external electric field, namely the electrocaloric effect (ECE). Expecting the entropic changes to be maximal under an applied field, the suitability of the La doped PZT 70/30 system for EC applications had been a motivation to undertake the current task as this composition reportedly can host a rich variety of phases depending on La content including relaxor and antiferroelectric (AFE) states. An electrocaloric (EC) temperature change of 1.15 °C in a wide range of temperatures for 8% La doping at 45 kV/cm applied field was estimated from experimental data, the possible origins of which is discussed. We were able to explain the experimental results by adopting a Landau-Ginzburg based computational approach coupled with elasticity and electrostatics whereby La sites are treated as point defects in a PZT 70/30 lattice. The gradual slanting of the hystereses and reduction of the transition temperature in the samples with increasing La content is claimed to be a direct consequence of the electrical fields due to formation of dipolar defect complexes as backed by our simulations. The ECE is discussed in the light of the simulations and recent results for AFE ceramics.Article Multiferroic Materials: Physics and Properties(Elsevier Ltd., 2016) Buurma, A. J. C.; Blake, G. R.; Palstra, T. T. M.; Adem, UmutMultiferroics are materials in which magnetism and ferroelectricity coexist. They are of fundamental interest to understand electronic behavior coupling magnetic interactions and electric dipolar order. Moreover, they are of applied interest because they allow various types of novel magnetic and electric device structures. We distinguish two important classes of multiferroic materials and discuss mechanisms and materials belonging to each class separately. In the first group of multiferroics, magnetization and polarization arise independently from each other. In the second category of multiferroics, ferroelectricity is induced by magnetic order, resulting in strong magnetoelectric coupling. We also briefly discuss multiferroic thin film heterostructures showing interfacial magnetoelectric coupling interactions with potential applications in memory devices.