Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
11 results
Search Results
Book Part Citation - Scopus: 1A Recycling Route of Plastics Via Electrospinning: From Daily Wastes To Functional Fibers(Walter de Gruyter GmbH, 2019) Isık, Tuğba; Horzum,N.; Demir, Mustafa MuammerSince large-scale plastic production has begun in the 1940s, plastics have been produced and used globally, bringing many advantages to modern life. The consumption of plastics has increased exponentially due to their low cost, chemical resistance, lightness, durability and ability to combine with other materials. However, plastic materials represent high tonnage in urban wastes, and it is known that these plastics discarded at the end of their useful life by filling the landfill sites. Electrospinning is a well-established and versatile technique for the fabrication of submicron fibers. In addition, it is a promising approach for the recycling of waste polymers without using complex methodologies. In this chapter, utilization of electrospinning approach for the recycling of daily wastes will be discussed. The literature about the daily wastes of both synthetic materials and natural/agricultural materials will be analyzed, and the applications of these materials will be given in detail. © 2019 Walter de Gruyter GmbH, Berlin/Boston. All rights reserved.Article Citation - WoS: 8Citation - Scopus: 10Impact of Simulated Inflammation and Food Breakdown on the Synergistic Interaction Between Corrosion and Wear on Titanium(Elsevier, 2024) Lima, A.R.; Pinto, A.M.P.; Toptan, F.; Alves, A.C.This paper investigates the impact of lactic acid and phosphoric acid additives in artificial saliva (AS), simulating inflammation and food breakdown, on the electrochemical and tribo-electrochemical behavior of titanium. The results showed that, unlike lactic acid, phosphoric acid significantly reduced corrosion resistance, mainly due to local damage and heterogeneities on the passive film. Non-additivated AS caused greater wear volume loss, with mechanical wear identified as the main mechanism. However, when additives were present, a synergistic interplay between corrosion and wear was observed. The study concludes that prolonged exposure to food breakdown could accelerate material degradation in titanium. © 2024 Elsevier LtdArticle Citation - WoS: 9Citation - Scopus: 7Understanding the Impact of Sri2 Additive on the Properties of Sn-Based Halide Perovskites(Elsevier, 2022) Yüce, Hürriyet; Perini, Carlo A. R.; Hidalgo, Juanita; Castro-Mendez, Andres-Felipe; Evans, Caria; Demir, Mustafa MuammerOrganic-inorganic halide perovskites have been identified as favorable candidates for the next generation of photovoltaics. Adding alkali metal halides to perovskite films has been shown to be a viable option to improve the perovskite film quality and to modulate their fundamental properties. In this work, we perform optical and electron-beam based characterizations of mixed Sn/Pb based perovskite films to investigate the effect of the addition of the alkaline metal halide SrI2. By analyzing structural (X-ray diffraction), morphological (Scanning Electron Microscopy), optical (photoluminescence), and chemical properties (X-ray photoelectron spectroscopy), we show a complex interplay of effects upon addition of Sr2+ into the perovskite solution. Low concentrations of Sr2+ increases lattice strain, which hints at incorporation of the additive into the perovskite lattice and improves the film optoelectronic properties. As the additive concentration increases beyond 0.5 mol %, microstrain decreases. At concentrations >0.5 mol %, Sr2+ induces significant reduction of the average domain size, which impacts both structural and optical properties of the perovskite film.Article Citation - WoS: 61Citation - Scopus: 64Electrospun Gelma Fibers and P(hema) Matrix Composite for Corneal Tissue Engineering(Elsevier Ltd., 2021) Arıca, Tuğçe A.; Güzelgülgen, Meltem; Yıldız, Ahu Arslan; Demir, Mustafa MuammerThe development of biocompatible and transparent three-dimensional materials is desirable for corneal tissue engineering. Inspired from the cornea structure, gelatin methacryloyl-poly(2-hydroxymethyl methacrylate) (GelMA-p(HEMA)) composite hydrogel was fabricated. GelMA fibers were produced via electrospinning and covered with a thin layer of p(HEMA) in the presence of N,N?-methylenebisacrylamide (MBA) as cross-linker by drop-casting. The structure of resulting GelMA-p(HEMA) composite was characterized by spectrophotometry, microscopy, and swelling studies. Biocompatibility and biological properties of the both p(HEMA) and GelMA-p(HEMA) composite have been investigated by 3D cell culture, red blood cell hemolysis, and protein adsorption studies (i.e., human serum albumin, human immunoglobulin and egg white lysozyme). The optical transmittance of the GelMA-p(HEMA) composite was found to be approximately 70% at 550 nm. The GelMA-p(HEMA) composite was biocompatible with tear fluid proteins and convenient for cell adhesion and growth. Thus, as prepared hydrogel composite may find extensive applications in future for the development of corneal tissue engineering as well as preparation of stroma of the corneal material. © 2020 Elsevier B.V.Book Citation - Scopus: 19Advanced Sensor and Detection Materials(John Wiley and Sons Inc., 2014) Tiwari, Ashutosh; Demir, Mustafa MuammerPresents a comprehensive and interdisciplinary review of the major cutting-edge technology research areas-especially those on new materials and methods as well as advanced structures and properties-for various sensor and detection devices. The development of sensors and detectors at macroscopic or nanometric scale is the driving force stimulating research in sensing materials and technology for accurate detection in solid, liquid, or gas phases; contact or non-contact configurations; or multiple sensing. The emphasis on reduced-scale detection techniques requires the use of new materials and methods. These techniques offer appealing perspectives given by spin crossover organic, inorganic, and composite materials that could be unique for sensor fabrication. The influence of the length, composition, and conformation structure of materials on their properties, and the possibility of adjusting sensing properties by doping or adding the side-groups, are indicative of the starting point of multifarious sensing. The role of intermolecular interactions, polymer and ordered phase formation, as well as behavior under pressure and magnetic and electric fields are also important facts for processing ultra-sensing materials. The 15 chapters written by senior researchers in Advanced Sensor and Detection Materials cover all these subjects and key features under three foci: 1) principals and perspectives, 2) new materials and methods, and 3) advanced structures and properties for various sensor devices. © 2014 Scrivener Publishing LLC. All rights reserved.Conference Object Development of Graphene Nanoplatelets Reinforced Aluminium Matrix Nanocomposites by a Combination of Semi-Solid Stirring and Ultrasonic Treatment(European Conference on Composite Materials, 2016) Kandemir, Sinan; Aydoğan, YücelGraphene Nanoplatelets (GNPs) consisting of graphene layers with a thickness less than 100 nm have recently emerged as a promising reinforcement type owing to their excellent physical and mechanical properties to improve mechanical properties of alloys beyond ceramic nanoparticles. Although there are numerous studies on GNPs reinforced polymer matrix composites in the literature, the number of studies related to the incorporation of GNPs in metal matrices is limited. It is a challenging task to incorporate and uniformly distribute GNPs into liquid metals due to their poor wettability and large surface-to-volume ratio. The purpose of this study is to effectively disperse GNPs into liquid aluminium. 0.5 wt.% GNPs with an average thickness of 50-100 nm and size of 5 ?m were first incorporated into A360 aluminium alloy under semi-solid stirring, and then the composite was ultrasonically treated in fully liquid state. The microstructural investigation of the nanocomposites by optical and scanning electron microscopy may suggest that relatively uniform distribution and effective deagglomeration of GNPs in the matrix were achieved. The hardness of the GNPs reinforced nanocomposites increased in comparison with that of semi-solid stirred and ultrasonically processed A360 alloy without reinforcement, indicating the potential of GNPs for strengthening metals. © 2016, European Conference on Composite Materials, ECCM. All rights reserved.Book Part Future Applications of Artificially-Synthesized Organic Molecules Containing Transition-Metal Atoms(Elsevier, 2018) Mayda, Selma; Kandemir, Zafer; Bulut, NejatArtificially-synthesized organic molecules which contain transition-metal atoms offer new possibilities for applications in the electronics, pharmaceutical, and chemical industries. Hence, developing an understanding of the electronic properties of this kind of organic molecules is important. With this purpose, here we study the electronic properties of metalloproteins, metalloenzymes, and Ru-based dye molecules as examples for this kind of organic molecules. In particular, we perform combined Hartree-Fock (HF) and quantum Monte Carlo (HF+QMC) calculations, as well as combined density functional theory (DFT) and QMC (DFT+QMC) calculations to study the electronic properties of these molecules. Our results show that new electronic states named as impurity bound states (IBS) form in metalloproteins, metalloenzymes, and Ru-based dye molecules. We show that the electron occupancy of IBS is critically important in determining the low-energy electronic properties of these molecules. In this respect, the IBS may play a central role in developing new applications based on artificially-synthesized organic molecules containing transition-metal atoms. © 2018 Elsevier Inc. All rights reserved.Conference Object Reversible Energy Transfer Between a Single Defect in Hbn and Graphene(OSA - The Optical Society, 2019) Özçeri, Elif; Arı, Ozan; Balcı, Sinan; Kocabaş, Coşkun; Ateş, SerkanWe present a reversible energy transfer between a single defect in hBN and graphene. Dynamic control of Fermi level of graphene results in switching on and off single photon emission from a single quantum emitter. © OSA 2019 © 2019 The Author(s)Conference Object Citation - WoS: 1Citation - Scopus: 4Polymer Nanofiber-Carbon Nanotube Network Generating Circuits(SPIE, 2018) Mutlu, Mustafa Umut; Akın, Osman; Yıldız, Ümit HakanThe polymer nanofiber carbon nanotube (CNT) based devices attracts attention since they promise high performance for next generation devices such as wearable electronics, ultra-light weighted appliances and foldable devices. This abstract describes the utilization of polymer nanofibers and CNT as major component of low cost foldable photo-resistor. We use polymer nanofiber as template guiding CNTs to generate nanocircuits and conductive sensing network. The controlled combination of CNTs and polymer nanofibers provide opportunities for device miniaturization without loss of performance. The nanofiber-CNT network based photo-resistor exhibits broad band response 400 to 1600 nm that holding promises for ultra-thin devices and new sensing platforms.Article Citation - WoS: 24Citation - Scopus: 29Hydrophobic Coatings From Photochemically Prepared Hydrophilic Polymethacrylates Via Electrospraying(John Wiley and Sons Inc., 2017) Işık, Tuğba; Demir, Mustafa Muammer; Aydoğan, Cansu; Çiftçi, Mustafa; Yağcı, YusufLinear poly(hydroxyethyl methacrylate-co-methyl methacrylate) P(HEMA-co-MMA) and poly(dimehylaminoethyl methacrylate-co-methyl methacrylate) P(DMAEMA-co-MMA) and their corresponding hyperbranched copolymers were synthesized by conventional photoinitiated free radical polymerization and self-condensing vinyl polymerization (SCVP) using Type I and Type II photoinitiators, respectively. Then, the polymers were processed by electrospraying in N, N-dimethylformamide. The surface of the resulting electrospray coatings was examined by SEM, XPS, and WCA then compared with those prepared by drop casting. Regardless of the structural nature of the polymers, electrospraying allows the preparation of rough surface that shows more hydrophobic behavior. Electrospray coatings with linear and hyperbranched copolymers exhibited WCA as ∼150° and ∼130°, respectively, indicating that branching reduces the WCA.