Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
11 results
Search Results
Article Citation - WoS: 8Citation - Scopus: 10Impact of Simulated Inflammation and Food Breakdown on the Synergistic Interaction Between Corrosion and Wear on Titanium(Elsevier, 2024) Lima, A.R.; Pinto, A.M.P.; Toptan, F.; Alves, A.C.This paper investigates the impact of lactic acid and phosphoric acid additives in artificial saliva (AS), simulating inflammation and food breakdown, on the electrochemical and tribo-electrochemical behavior of titanium. The results showed that, unlike lactic acid, phosphoric acid significantly reduced corrosion resistance, mainly due to local damage and heterogeneities on the passive film. Non-additivated AS caused greater wear volume loss, with mechanical wear identified as the main mechanism. However, when additives were present, a synergistic interplay between corrosion and wear was observed. The study concludes that prolonged exposure to food breakdown could accelerate material degradation in titanium. © 2024 Elsevier LtdConference Object Citation - WoS: 1Citation - Scopus: 1Assessment of Separation and Agglomerationt Tendency of Non-Metallic Inclusions in an Electromagnetically Stirred Aluminum Melt(Springer international Publishing Ag, 2023) Li, Cong; Dang, Thien; Gokelma, Mertol; Zimmermann, Sebastian; Mitterecker, Jonas; Friedrich, BerndPresence of non-metallic inclusions (NMIs) reduces surface quality and mechanical properties of aluminum products. The development of good NMIs removal practices relies on the understanding of inclusion behaviors with respect to separation and agglomeration particularly in the turbulent flow. In the scenario of electromagnetically induced recirculated turbulent flow, the concerned behaviors of inclusions with different sizes have rarely been investigated experimentally. In the presented study funded by AMAP Open Innovation Research Cluster, reference materials were prepared with uniformly distributed NMIs (SiC and MgAl2O4) via an ultrasoundinvolved casting route. Reference materials were charged into an aluminum melt where turbulent flow was promoted via electromagnetic force. Microscopical analysis shows non-significant agglomeration tendency of SiC, MgAl2O4, and TiB2 inclusion. Time-weight filtration curve, PoDFA, and Spark Spectrometer results suggest a strong dependence of separation rate on particle size. Analytical models were established to estimate the collision rate of particles and to evaluate separation probability of different sized particles.Conference Object Pre-Study of the Dissolution Behavior of Silicon Kerf Residue in Steel(Springer, 2022) Lazou, Adamantia; Nilssen, David; Gökelma, Mertol; Wallin, Maria; Tranell, GabriellaSilicon kerf residue is generated during the wafering process of pure silicon in the photovoltaic value chain. The generated by-product has a high volume, and the particle size is typically below 1 μm. Although the fine particles are partly oxidized, the material may be beneficial in different metallurgical applications such as grain refining and alloy composition adjustments. This work studies the dissolution behavior of silicon kerf in low alloy steel melts with the aim to upcycle the kerf material in the steel industry for different purposes. In this study, a steel alloy and the kerf residue were melted (at 1580 °C) in an alumina crucible placed in an induction furnace. The amount of added kerf residue was varied. The behavior of the particles in the solidified alloy was characterized by using an optical microscope, electron probe microscope (EPMA), and wavelength-dispersive X-ray spectroscopy (WDS) in order to study the dissolution behavior of the Si-kerf residue in the steel.Conference Object Citation - WoS: 2Citation - Scopus: 1The Influence of the Casting Speed in Horizontal Continuous Casting of Aluminium Alloy En Aw 6082(Springer, 2021) Obalı, Akın; Dilek, Kerem Ahmet; Akdi, Seracettin; Ürk, Deniz Kavrar; Gökelma, MertolVertical direct chill (VDC) casting is commonly used to produce slabs and billets from wrought aluminium alloys. The fact that the VDC is not a continuous process and moulds must be prepared for the next batch decreases the productivity of the process. Alternatively, horizontal direct chill (HDC) casting simplifies the process and allows a continuous production. The casting speed in the HDC casting is easier to control and can be optimized for different alloys by changing the speed. This study focuses on investigating the effects of casting speed on the macrostructure of 6082 aluminium billets with 60 mm diameter. A demo-scale casting unit was used and the casting speed was changed from 310 to 385 mm/min. Changes in surface condition, macrocracks, microporosity, and diameter of the billets were investigated. Surface quality of the billets became better with the increasing casting speed, while diameter of the billet expands. Furthermore, centreline cracks appear at the casting speed of 355 mm/min. © 2021, The Minerals, Metals & Materials Society.Book Part Citation - WoS: 11Recent Progresses in Perovskite Solar Cells(Intech Europe, 2017) Demiç, Şerafettin; Özcivan, Ahmet Nuri; Can, Mustafa; Özbek, Cebrail; Karakaya, MervePerovskite solar cell (PSC) can be regarded as a continuation of dye sensitized solar cell (DSSC) in terms of the sensitization phenomena that occurred in the functioning molecules. In 2012, a breakthrough propose has been made for the sensitization of PSCs, in which a solid-state structure is offered as an equivalent sensitizer used in DSSC. The power conversion efficiency (PCE) of those solid-state cells reached about twofold of its initial value during the past several years. Immediately after, the researchers followed this propose worldwide. They have introduced an improved efficiency of as much as 20%, which was originally started from its initial value of 4%, just in 4 years. Thus, the new concept, solid perovskite molecules, has eliminated the need for the liquid electrolyte in DSSC while still carrying the advantages of organic solar cells (OSCs). Therefore, the distinctive material of PSC-the organometallic halide molecules (also known as OMH or organic-inorganic trihalides)-inclined an unexpected reputation for solar cell (SC) researches. Hence, it seems that we will witness a new age for solar conversion devices depending on the recent hopeful progresses on PSCs. The high rate of photovoltaic (PV) conversion capacity in PSC is generally expressed by the basic properties possessed by the organic-inorganic perovskite crystal, such as better optical properties and well diffused charges along huge distances during the charge transport. In addition, a low temperature processing is applicable during its production. Moreover, the perovskite layer provides a tunable band gap. Therefore, depending on better developments on designed molecules, PSC may gain extreme performances compared to the other competitors, such as OSC or DSSC devices. This chapter starts with a general discussion on the need for an affordable clean energy conversion device that is urgent for the future of humanity, due to publicly well-known global warming issue. In Section 2, basic properties of PSC are mentioned together with their structure and working principles. Section 3 continues with an overview on organometallic perovskite molecules after a brief introductory history is presented. The absorption and band gap properties are also discussed. Since most perovskite materials need a hole transporting material (HTMs) within the PSC, the kinds of HTMs that are designed for PSCs are described in Section 3. The rendering of long-term stabilization has special importance for PSCs since the instability issue remained idle in spite of those recent increased efficiency values attained by various research groups. Therefore, the stability issues are discussed in a separate part in Section 4. We finally close the chapter discussing the challenges and opportunities relying on the chapter content. We note that the recent investigations on PSCs have special importance for its large-scale realization in order to make them ready for the photovoltaic industry of the future. Hence, there are various announced meetings focusing on its mass production due to the unexpected sharp rise of the perovskite efficiency in the last 6 years. Hence, all the new cutting-edge scientific findings are also dealt with commercialization issues now, in order to attain the desired low cost fabrication, including the yield of high purity and the formation of smooth films during the continual manufacture of perovskite layers.Book Part Future Applications of Artificially-Synthesized Organic Molecules Containing Transition-Metal Atoms(Elsevier, 2018) Mayda, Selma; Kandemir, Zafer; Bulut, NejatArtificially-synthesized organic molecules which contain transition-metal atoms offer new possibilities for applications in the electronics, pharmaceutical, and chemical industries. Hence, developing an understanding of the electronic properties of this kind of organic molecules is important. With this purpose, here we study the electronic properties of metalloproteins, metalloenzymes, and Ru-based dye molecules as examples for this kind of organic molecules. In particular, we perform combined Hartree-Fock (HF) and quantum Monte Carlo (HF+QMC) calculations, as well as combined density functional theory (DFT) and QMC (DFT+QMC) calculations to study the electronic properties of these molecules. Our results show that new electronic states named as impurity bound states (IBS) form in metalloproteins, metalloenzymes, and Ru-based dye molecules. We show that the electron occupancy of IBS is critically important in determining the low-energy electronic properties of these molecules. In this respect, the IBS may play a central role in developing new applications based on artificially-synthesized organic molecules containing transition-metal atoms. © 2018 Elsevier Inc. All rights reserved.Conference Object Citation - WoS: 1Citation - Scopus: 4Polymer Nanofiber-Carbon Nanotube Network Generating Circuits(SPIE, 2018) Mutlu, Mustafa Umut; Akın, Osman; Yıldız, Ümit HakanThe polymer nanofiber carbon nanotube (CNT) based devices attracts attention since they promise high performance for next generation devices such as wearable electronics, ultra-light weighted appliances and foldable devices. This abstract describes the utilization of polymer nanofibers and CNT as major component of low cost foldable photo-resistor. We use polymer nanofiber as template guiding CNTs to generate nanocircuits and conductive sensing network. The controlled combination of CNTs and polymer nanofibers provide opportunities for device miniaturization without loss of performance. The nanofiber-CNT network based photo-resistor exhibits broad band response 400 to 1600 nm that holding promises for ultra-thin devices and new sensing platforms.Conference Object Citation - WoS: 2Citation - Scopus: 4Monitoring Excimer Formation of Perylene Dye Molecules Within Pmma-Based Nanofiber Via Flim Method(SPIE, 2016) İnci, Mehmet Naci; Açıkgöz, Sabriye; Demir, Mustafa MuammerConfocal fluorescence lifetime imaging microscopy method is used to obtain individual fluorescence intensity and lifetime values of aromatic Perylene dye molecules encapsulated into PMMA based nanofibers. Fluorescence spectrum of aromatic hydrocarbon dye molecules, like perylene, depends on the concentration of dye molecules and these dye molecules display an excimeric emission band besides monomeric emission bands. Due to the dimension of a nanofiber is comparable to the monomer emission wavelength, the presence of nanofibers does not become effective on the decay rates of a single perylene molecule and its lifetime remains unchanged. When the concentration of perylene increases, molecular motion of the perylene molecule is restricted within nanofibers so that excimer emission arises from the partially overlapped conformation. As compared to free excimer emission of perylene, time-resolved experiments show that the fluorescence lifetime of excimer emission of perylene, which is encapsulated into NFs, gets shortened dramatically. Such a decrease in the lifetime is measured to be almost 50 percent, which indicates that the excimer emission of perylene molecules is more sensitive to change in the surrounding environment due to its longer wavelength. Fluorescence lifetime measurements are typically used to confirm the presence of excimers and to construct an excimer formation map of these dye molecules.Article Fabrication of Bi2212 Single Crystal Bolometer for Detection of Terahertz Waves(Springer Verlag, 2017) Semerci, Tuğçe; Demirhan, Yasemin; Miyakawa, Nobuaki; Wang, Huabing; Özyüzer, LütfiTerahertz (THz) radiation is in powerful region of electromagnetic spectrum because of prosperous application areas yet deficiency still exists about sources and detectors in despite of improvements of the research field in this range. This gap can be filled by focusing on development of THz detectors. Therefore, bolometers were preferred through many detectors due to detection sensitivity above 1 THz. In this study, Bi2Sr2CaCu2O8+δ (Bi2212) single crystals were used to fabricate THz bolometric detector. Bi2212 single crystals were transferred on sapphire substrate by cleavage process and e-beam lithography and ion beam etching were used to fabricate the microchip clean room facilities. Customdesigned cryogenic cryostat was used for a-b axis electrical and THz response measurements with liquid nitrogen cooled system. After electrical measurements, Bi2212 microchips detected the signals using Stefan-Boltzmann Lamp and response time were calculated. This study have shown with our experimental results that Bi2212 single crystals are potential candidates for THz bolometric detectors.Article Citation - WoS: 3Citation - Scopus: 3Growth and Characterization of Cdte Absorbers on Gaas by Mbe for High Concentration Pv Solar Cells(John Wiley and Sons Inc., 2015) Arı, Ozan; Polat, Mustafa; Karakaya, Merve; Selamet, YusufCdTe based II-VI absorbers are promising candidates for high concentration PV solar cells with an ideal band gap for AM1.5 solar radiation. In this study, we propose single crystal CdTe absorbers grown on GaAs substrates with a molecular beam epitaxy (MBE) which is a clean deposition technology. We show that high quality CdTe absorber layers can be grown with full width half maximum of X-ray diffraction rocking curves (XRD RC) as low as 227 arc-seconds with 0.5% thickness uniformity that a 2 μm layer is capable of absorbing 99% of AM1.5 solar radiation. Bandgap of the CdTe absorber is found as 1.483 eV from spetroscopic ellipsometry (SE) measurements. Also, high absorption coefficient is calculated from the results, which is ∼5 x 105cm-1 in solar radiation spectrum.