Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
43 results
Search Results
Article Citation - WoS: 61Citation - Scopus: 64Electrospun Gelma Fibers and P(hema) Matrix Composite for Corneal Tissue Engineering(Elsevier Ltd., 2021) Arıca, Tuğçe A.; Güzelgülgen, Meltem; Yıldız, Ahu Arslan; Demir, Mustafa MuammerThe development of biocompatible and transparent three-dimensional materials is desirable for corneal tissue engineering. Inspired from the cornea structure, gelatin methacryloyl-poly(2-hydroxymethyl methacrylate) (GelMA-p(HEMA)) composite hydrogel was fabricated. GelMA fibers were produced via electrospinning and covered with a thin layer of p(HEMA) in the presence of N,N?-methylenebisacrylamide (MBA) as cross-linker by drop-casting. The structure of resulting GelMA-p(HEMA) composite was characterized by spectrophotometry, microscopy, and swelling studies. Biocompatibility and biological properties of the both p(HEMA) and GelMA-p(HEMA) composite have been investigated by 3D cell culture, red blood cell hemolysis, and protein adsorption studies (i.e., human serum albumin, human immunoglobulin and egg white lysozyme). The optical transmittance of the GelMA-p(HEMA) composite was found to be approximately 70% at 550 nm. The GelMA-p(HEMA) composite was biocompatible with tear fluid proteins and convenient for cell adhesion and growth. Thus, as prepared hydrogel composite may find extensive applications in future for the development of corneal tissue engineering as well as preparation of stroma of the corneal material. © 2020 Elsevier B.V.Article Citation - WoS: 14Citation - Scopus: 17Spectrophotometric Characterization of Plasticizer Migration in Poly(vinyl Chloride)-Based Artificial Leather(Elsevier Ltd., 2021) Akkuş Altındağ, İffet; Akdoğan, YaşarPlasticized polyvinyl chloride (PVC) is one of the most commonly used material in the manufacture of artificial leather because of its flexibility, high durability and low cost. While hundreds of plasticizers have been produced to obtain PVC films and artificial leathers, it is important to choose the correct plasticizer to produce the desired products. Therefore, here five non-phthalate type plasticizers with three levels (40 phr, 60 phr and 80 phr); trioctyl trimelliate (TOTM), tributyl trimelliate (TBTM), dioctyl terephthalate (DOTP), dioctyl adipate (DOA) and dioctyl succinate (BIO) were used to prepare plasticized PVC films. They were studied in terms of their compabilities with PVC polymer chains, and their effects on mechanical properties of PVC films. Although, linear plasticizers e.g. BIO and DOA have higher compabilities with PVC, a branched plasticizer e.g. TOTM showed higher mechanical properties. Moreover, a new spectrophotometric method for determination of plasticizer migration from PVC polymer matrix to the surface of artifical leather was developed. According to lightness change on the surface of PVC artifical leather before and after heat treatment at 70 °C, the migration rates of used plasticizers increase in this order: TOTM < TBTM < DOTP < BIO < DOA. © 2020 Elsevier B.V.Article Citation - WoS: 19Citation - Scopus: 22Enhanced Methylene Blue Removal Efficiency of Tio2 Embedded Porous Glass(Elsevier Ltd., 2021) Ertuş, E.Burak; Vakıfahmetoğlu, Çekdar; Öztürk, AbdullahA porous glass (PG) embedded with titanium dioxide (TiO2) was produced via impregnation of the PG with Titanium (IV) Isopropoxide solution followed by crystallization. N2 sorption analyses revealed that the specific surface area (SSA) and total pore volume of the PG reached to 358 m2/g and 0.370 cm3/g, respectively. The adsorption capacity of methylene blue (MB) for the glasses was measured in the dark, instead the photocatalytic MB removal efficiency was evaluated by the degradation of MB under UV light illumination using a UV–vis spectrometer. The MB removal efficiency of the TiO2 synthesized anatase powder was only 32.3 % whereas, for TiO2 embedded PG (TiPG) it was 91.6 %, and nearly complete (> 99 %) efficacy was achieved for TiO2 embedded alkaline leached PG (TiPG-AL) under UV illumination 3 h period. Better MB removal efficiency was attributed to high SSA and dispersion of nano size anatase TiO2 crystallites within the porous structure. © 2020 Elsevier LtdArticle Citation - WoS: 40Citation - Scopus: 44Plasmon-Enhanced Photocatalytic and Antibacterial Activity of Gold Nanoparticles-Decorated Hematite Nanostructures(Elsevier Ltd., 2021) Emre, Alp; İmamoğlu, Rizvan; Savacı, Umut; Turan, Servet; Kazmalı, M. Kürşat; Genç, AzizHematite (alpha-Fe2O3) nanoparticles have received significant attention from the researchers due to their favorable and desirable properties in diverse applications. In the present study, single-crystalline hematite pseudo-nanocubes and porous nanorods were synthesized by the hydrothermal route without the usage of any surfactant agents, which were then decorated with gold nanoparticles hidrothermally in an aqueous solution in order to increase the solar energy conversion efficiency. The photocatalytic activities of synthesized nanoparticles were studied against Rhodamine B (RhB) under the illumination of AM 1.5 solar simulator. The excellent photocatalytic efficiency was obtained by changing morphological features of hematite nanostructures, along with the photocatalytic performance enhancement up to 25% thanks to the surface plasmon resonances for the gold nanoparticles-decorated hematite nanostructures. For instance, gold-nanoparticles decorated hematite pseudo-nanocubes almost completely degraded all the RhB after 30 min of illumination. It was also observed that all hematite products, with and without gold decoration, exhibited an impressive antibacterial effect and showed the lethal effect in E.coli. The same nanoparticles being photocatalytically active for organic pollutant degradation and having antibacterial effect may have a good potential for waste water remediation applications. (C) 2020 Elsevier B.V. All rights reserved.Article Citation - WoS: 169Citation - Scopus: 177Thin Film Microextraction: Towards Faster and More Sensitive Microextraction(Elsevier Ltd., 2019) Ölçer, Yekta Arya; Tascon, Marcos; Eroğlu, Ahmet Emin; Boyacı, EzelThin film microextraction (TFME) is an analytical tool that has been proven to be suitable for integrated sampling and sample preparation of a wide variety of routine and on-site applications. Compared to the traditional microextraction techniques, the most important advantage of TFME is its enhanced sensitivity due to the relatively larger extractive phase spread over a larger surface area. The technique, in this way, facilitates fast extraction kinetics and high extractive capacity. Moreover, TFME offers high versatility for device development over classical SPME technologies due to the plethora of available extractive phases, coating methods and geometry options. The goal of this review is to provide a comprehensive summary of the contemporary advances in this exciting field covering novel extractive phases, technological and methodological developments, and relevant cutting-edge applications. Finally, a critical discussion of the future trends on TFME is also presented. (C) 2019 Elsevier B.V. All rights reserved.Article Citation - WoS: 103Citation - Scopus: 110Cold Sintering of Ceramics and Glasses: a Review(Elsevier Ltd., 2020) Ahmetoğlu, Çekdar Vakıf; Karacasulu, LeventTraditionally ceramic artifacts are processed at high temperatures (> 1000 degrees C) by classical sintering techniques such as solid state, liquid phase and pressure-assisted sintering. Recently, inspired from the geology, novel sintering approaches that allow the densification of ceramic components at relatively low temperatures <= 400 degrees C have been proposed. While initial efforts for such low temperature densification concept were developed in the mid-70s, the topic has become increasingly prominent in the last decade. Currently, these low temperature methods can be classified into four main groups: (i) hydrothermal reaction sintering (HRS), (ii) hydrothermal hot pressing (HHP), (iii) pressure-assisted densification techniques: room-temperature densification (RTD), cold sintering (CS), warm press (WP), and finally no-pressure assisted method called (iv) reactive hydrothermal liquid phase densification (rHLPD). Above named techniques are commonly assisted by an aqueous solution used as either reactant or transient liquid phase to assist densification. Starting from the background in traditional sintering processes, this review aims to explore in depth the existing literature about low temperature densification approaches along with their advantages & disadvantages, and probable application areas.Correction Citation - Scopus: 1Corrigendum To “hierarchically Porous Polymer Derived Ceramics: a Promising Platform for Multidrug Delivery Systems”[mater. Des. 140(supplement C) (2018) 37–44](Elsevier Ltd., 2018) Ahmetoğlu, Çekdar Vakıf; Zeydanlı, Damla; Özalp, Veli Cengiz; Borsa, Barı Ata; Soraru, Gian DomenicoThe authors regret to inform that The TMTVS ratios for samples were written incorrectly. The true weight ratios for PHMS/LDH/PDMS/TMTVS blends should be as follows: Bio1 = 1/0.055/0.25/0.055, and Bio2 = 1/0.055/1/0.055. The discussion in the study is not affected by this mistype and actually the previous paper [1] cited also in the paper as ref.#44 gives right values for the sample preparation. The authors would like to apologize for the inconvenience caused.Article Citation - WoS: 39Citation - Scopus: 43Tailored Electrospun Fibers From Waste Polystyrene for High Oil Adsorption(Elsevier Ltd., 2018) Isık, Tuğba; Demir, Mustafa MuammerRecent ship accidents that resulted catastrophic oil spills necessitate producing environmentally friendly, costeffective, and large-scale fabrication technology for oil-sorbent materials. Various material systems have been employed to fabricate sorbent materials; however, using fresh material components as adsorbent can lead to a secondary pollution. Therefore, recycling of plastics wastes for the fabrication of adsorbent material could be a wise approach to handle this environmental issue. In this study, foam-expanded polystyrene (f-PS), a commodity polymer used for insulation and packing materials, was electrospun from solution mixture of THF and DMF. Surface and interior porosity were achieved from individual fibers electrospun froma composition of DMF: THF (1:3) at 20-wt% of solid f-PS content. The resulting adsorbents exhibited a considerable hydrophobicity (WCA approximate to 120 degrees) and oleophilicity (CA approximate to 10 degrees), which can selectively adsorb both vegetable and engine oils from polluted waters. The porosity of the fibers has significant effect on the sorption capacity and separation efficiency up to 124 g/g and 99%, respectively. Thus, electrospun mats of the polystyrene wastes offer a promising adsorbent for the remediation of oily wastewaters. (C) 2018 Published by Elsevier B.V.Article Citation - WoS: 30Citation - Scopus: 32Perylene-Embedded Electrospun Ps Fibers for White Light Generation(Elsevier Ltd., 2019) Güner, Tuğrul; Aksoy, Erkan; Demir, Mustafa Muammer; Varlıklı, CananPerylene dyes have been employed in the fabrication of white light due to their superior photophysical properties and relatively easy synthetic methods. However, their molecular aggregation in solid state is one of the main handicaps since it causes deviation in their optical properties and quenches photoluminescence quantum yields (Phi(f)). Investigation of the photophysical properties of a green (PTE), a yellow (PDI) and a new red (DiPhAPDI) emitting perylene derivative in solution, drop-casted films, polystyrene (PS) fibers and PS fibers embedded in poly (dimethyl siloxane) (PDMS) showed that PS:dye fibers prevent aggregation to some extend and allows high Of of dyes. The Of values of PTE, PDI and DiPhAPDI were all higher than 93.0% in solution and 84.8%, 94.3% and 73.6%, respectively in PS:dye fibers. Embedding the fibers in PDMS improved the photostabilities of the dyes two folds compared to their solution phases. The prepared dye containing fibers were combined together into a single PDMS film and utilized as a frequency conversion layer on a blue LED. Fabricated samples were found to show high color rendering index (>= 90), adjustable CCT (7500 K-5000 K), and power efficiency values exceeding 2001m/W depending on the used fiber amount in mass.Article Citation - WoS: 63Citation - Scopus: 65Amidoxime Functionalized Polymers of Intrinsic Microporosity (pim-1) Electrospun Ultrafine Fibers for Rapid Removal of Uranyl Ions From Water(Elsevier Ltd., 2019) Satılmış, Bekir; Isık, Tuğba; Demir, Mustafa Muammer; Uyar, TamerThe Polymers of Intrinsic Microporosity (PIM-1) is considered as one of the most promising polymer candidates for adsorption applications owing to its high surface area and the ability to tailor the functionality for the targeted species. This study reports a facile method for the preparation of amidoxime functionalized PIM-1 fibrous membrane (AF-PIM-FM) by electrospinning technique and its practical use for the extraction of U(VI) ions from aqueous systems via column sorption under continuous flow. Fibrous membrane form of amidoxime functionalized PIM-1 (AF-PIM-FM) was prepared by electrospinning method owing to its excellent processability in dimethylformamide. Bead-free and uniform fibers were obtained as confirmed by SEM imaging and average fiber diameter was 1.69 +/- 0.34 mu m for AF-PIM-FM. In addition, electrospun PIM-1 fibrous membrane (PIM-FM) was prepared as a control group. Structural and thermal characterization of powder and membrane forms of the materials were performed using FT-IR, H-1 NMR, XPS, Elemental analyses, TGA, and DSC. The porosity of the samples was measured by N-2 sorption isotherms confirming amidoxime PIM-1 still maintain their porosity after functionalization. Amidoxime functionality along with membrane structure makes AF-PIM-FM a promising material for uranyl adsorption. First, a comparison between powder and membrane form of amidoxime functionalized PIM-1 was investigated using batch adsorption process. Although membrane form has shown slightly lower adsorption performance in the batch adsorption process, the advantage of using the membrane in column adsorption processes makes membrane form more feasible for real applications. In addition, amidoxime modification enhanced the uranium adsorption ability of PIM-FM up to 20 times. The effect of initial concentration and pH were investigated along with regeneration of the adsorbents. AF-PIM-FM was successfully used for five adsorption-desorption cycles without having any damage on the fibrous structure.