Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
5 results
Search Results
Article Citation - WoS: 3Citation - Scopus: 5Physically Unclonable Security Patterns Created by Electrospinning, and Authenticated by Two-Step Validation Method(IOP Publishing, 2022) Taşcıoğlu, Didem; Atçı, Arda; Sevim Ünlütürk, Seçil; Özçelik, SerdarCounterfeiting is a growing economic and social problem. For anticounterfeiting, random and inimitable droplet/fiber patterns were created by the electrospinning method as security tags that are detectable under UV light but invisible in daylight. To check the authenticity of the original security patterns created; images were collected with a simple smartphone microscope and a database of the recorded original patterns was created. The originality of the random patterns was checked by comparing them with the patterns recorded in the database. In addition, the spectral signature of the patterns in the droplet/fiber network was obtained with a simple and hand-held spectrometer. Thus, by reading the spectral signature from the pattern, the spectral information of the photoluminescent nanoparticles was verified and thus a second-step verification was established. In this way, anticounterfeiting technology that combines ink formula, unclonable security pattern creation and two-level verification is developed.Article Citation - WoS: 2Citation - Scopus: 2Mn2+ Ions Incorporated Into Znsxse1-X Colloidal Quantum Dots: Controlling Size and Composition of Nanoalloys and Regulating Magnetic Dipolar Interactions(IOP Publishing, 2021) Ünlütürk, Seçil Sevim; Akdoğan, Yaşar; Özçelik, SerdarA facile synthesis method is introduced how to prepare magnetically active ultraviolet emitting manganese ions incorporated into ZnSxSe1-x colloidal quantum dot (nanoalloy) at 110 degrees C in aqueous solutions. The reaction time is the main factor to control the hydrodynamic size from 3 to 10 nm and the precursor ratio is significant to tune the alloy composition. ZnS shell layer on the ZnSxSe1-x core was grown to passivate environmental effects. The nanoalloy has ultraviolet emission at 380 nm having a lifetime of 80 ns and 7% quantum yield. The incorporation of Mn2+ ions into the nanoalloys induced magnetic activity but did not modify the structure and photophysical properties of the nanoalloys. Colloidal and powdery samples were prepared and analyzed by electron paramagnetic resonance (EPR) spectroscopy. In the colloidal dispersions, EPR spectra showed hyperfine line splitting regardless of the Mn2+ ion fractions, up to 6%, indicating that Mn2+ ions incorporated into the nanoalloys were isolated. EPR signals of the powdery samples were broadened when the fraction of Mn2+ ions was higher than 0.1%. The EPR spectra were simulated to reveal the locations and interactions of Mn2+ ions. The simulations suggest that the Mn2+ ions are located on the nanoalloy surfaces. These findings infer that the magnetic dipolar interactions are regulated by the initial mole ratio of Mn/Zn and the physical state of the nanoalloys adjusted by preparation methods.Article Citation - WoS: 11Citation - Scopus: 11Enhanced Room Temperature Energy Storage Density of Bi(li1/3ti2 Substituted Bi0.5na0.5tio3-Batio3 Ceramics(IOP Publishing, 2021) Karakaya, Merve; Adem, UmutFor high power electronics applications, relaxor ferroelectrics are promising materials due to their superior energy storage properties. In this study, we investigate the energy storage properties of novel lead free relaxor ferroelectric ceramics (1-x)(0.92Bi(0.5)Na(0.5)TiO(3)-0.08BaTiO(3))-xBi(Li1/3Ti2/3)O-3 (abbreviated as BNT-8BT-xBLT). BNT-8BT composition which is close to morphotropic phase boundary was chosen as the base due to its large maximum polarization (P-m) and higher ratio of weakly polar tetragonal phase which is expected to facilitate ergodic relaxor behavior and improve energy storage density. The substitution of BLT to the BNT-8BT strongly disrupts the correlations between the polar nanoregions and the transition from nonergodic to ergodic relaxor state occurs already at x = 0.02 BLT at room temperature. Largest energy density (W-rec) at 61 kV cm(-1) was obtained for x = 0.02 sample (0.656 J cm(-3)), followed by x = 0.03 (W-rec = 0.614 J cm(-3)) and x = 0.05 (W-rec= 0.559 J cm(-3)). The x = 0.02 sample keeps its energy storage density at high temperatures (i.e. W-rec= 0.88 J cm(-3,) eta = 97%, E-m= 65 kV cm(-1) at 125 degrees C), while larger electric field (up to 89 kV cm(-1)) could be applied to the x = 0.05 sample with the smallest grain size and energy density of 1.03 J cm(-3) was reached at room temperature. Energy storage density values of BLT substituted materials normalized per unit applied electric field are promising among BNT-based materials.Article Citation - WoS: 21Citation - Scopus: 22Green Function, Quasi-Classical Langevin and Kubo-Greenwood Methods in Quantum Thermal Transport(IOP Publishing, 2019) Sevinçli, Haldun; Roche, S.; Cuniberti, G.; Brandbyge, M.; Gutierrez, R.; Sandonas, L. MedranoWith the advances in fabrication of materials with feature sizes at the order of nanometers, it has been possible to alter their thermal transport properties dramatically. Miniaturization of device size increases the power density in general, hence faster electronics require better thermal transport, whereas better thermoelectric applications require the opposite. Such diverse needs bring new challenges for material design. Shrinkage of length scales has also changed the experimental and theoretical methods to study thermal transport. Unsurprisingly, novel approaches have emerged to control phonon flow. Besides, ever increasing computational power is another driving force for developing new computational methods. In this review, we discuss three methods developed for computing vibrational thermal transport properties of nano-structured systems, namely Green function, quasi-classical Langevin, and Kubo-Green methods. The Green function methods are explained using both nonequilibrium expressions and the Landauer-type formula. The partitioning scheme, decimation techniques and surface Green functions are reviewed, and a simple model for reservoir Green functions is shown. The expressions for the Kubo-Greenwood method are derived, and Lanczos tridiagonalization, continued fraction and Chebyshev polynomial expansion methods are discussed. Additionally, the quasi-classical Langevin approach, which is useful for incorporating phonon-phonon and other scatterings is summarized.Article Citation - WoS: 8Citation - Scopus: 10Microstructures and Mechanical Properties of Graphene Platelets-Reinforced Spark Plasma Sintered Tantalum Diboride-Silicon Carbide Composites(IOP Publishing, 2019) Gürcan, Kübra; İnci, Ezgi; Saçkan, İbrahim; Ayaş, Erhan; Gasan, HakanGraphene nanoplates reinforcement (GNPs) TaB2-SiC composites were fabricated with Spark Plazma sintering (SPS) at 1850 degrees C with a-uniaxial pressure of 50 MPa and 10 min dwell time. Systematic investigation on the effect of GNP amount of densification, microstructural and mechanical properties (microhardness and fracture toughness) of the composites were presented. Density and hardness of composites decreased with the addition of GNP, while similar to 35% increase of fracture toughness value was obtained with GNP addition. The microstructural evaluation indicated that overlapped and agglomerated GNPs increased with an increasing amount of GNP in the composites and caused to decrease of density and hardness. On the other hand, GNP was retained in the composite form even with high process temperature (1850 degrees C) and cause toughening of composites with changing the fracture mode from transgranular to transgranular/intergranular fracture. GNP pull out, crack branching, crack bridging and crack deflection were observed as main toughening mechanisms.