Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği

Permanent URI for this collectionhttps://hdl.handle.net/11147/4719

Browse

Filters

2019 - 201912020 - 202420

Settings

Publisher: search.filters.publisher.Springer

Search Results

Now showing 1 - 10 of 21
  • Article
    Citation - WoS: 1
    Citation - Scopus: 1
    Bioavailability Assessment of the Novel Gsh-Functionalized Feb Nanoparticles Via Oxidative Stress and Trace Element Metabolism in Vitro: Promising Tools for Biomedical Applications
    (Springer, 2024) Aydemir, Duygu; Aribuga, Dilara; Hashemkhani, Mahshid; Acar, Havva Yagci; Çağıran, Özge Balcı; Ulusu, Nuriye Nuray
    Iron-based magnetic nanoparticles (NPs) have attracted significant attention in biomedical research, particularly for applications such as cancer detection and therapy, targeted drug delivery, magnetic resonance imaging (MRI), and hyperthermia. This study focuses on the synthesis and glutathione (GSH) functionalization of iron boride (FeB) nanoparticles (NPs) for prospective biomedical use. The GSH-functionalized FeB NPs (FeB@GSH) demonstrated ferromagnetic behavior, with a saturation magnetization (Ms) of 45.8 emu/g and low coercivity (Hc = 1000 Oe), indicating desirable magnetic properties for biomedical applications. Transmission electron microscopy (TEM) analysis of the FeB@GSH revealed well-dispersed nanoparticles with diameters smaller than 30 nm. Comprehensive nanotoxicity and biocompatibility assessments were performed using various healthy and cancer cell lines, including 293 T, HeLa, 3T3, MCF7, HCT116, and CFPAC-1. Cytotoxicity assays were conducted on FeB@GSH-treated cells over a dose range of 0-300 mu g/mL during 24-h incubations. Results indicated no significant differences in cell viability between treated and untreated control groups, confirming the biocompatibility of FeB@GSH. Further nanotoxicity evaluations were carried out on 3T3, 293 T, and CFPAC-1 cell lines, focusing on oxidative stress markers and cellular metabolism by measuring antioxidant enzyme activity. Additionally, ion release and mineral metabolism were assessed using inductively coupled plasma mass spectrometry (ICP-MS), revealing no notable variations between the treated and control groups. These findings suggest that FeB@GSH NPs exhibit excellent biocompatibility, making them promising candidates for diverse biomedical applications, including medical imaging, drug delivery systems, and therapeutic interventions.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 3
    Effects of Different Precursors on the Aging and Electrocaloric Properties of Mn-Doped Ba0.95sr0.05tio3 Ceramics
    (Springer, 2023) Karakaya, Merve; Erdem, Emre; Akdoğan, Yaşar; Adem, Umut
    In this study, the effects of different types of Mn precursors (MnO2 and Mn2O3) and sintering temperature on the defect dipole formation, ferroelectric aging and electrical properties were investigated by using Ba0.95Sr0.05TiO3 ceramics as the base. Both Mn precursors were substituted to the Ti-site as 1 mol% and two different sintering temperatures of 1325 and 1400 degrees C were used to study the effect of grain size. We deduced that slightly higher amounts of Mn2+ can be incorporated into the perovskite structure when MnO2 is used as the precursor, by using X-ray diffraction and electron paramagnetic resonance spectroscopy. Mn-doped samples sintered at 1325 degrees C age faster than those sintered at 1400 degrees C. Aging caused a decrease in the electrocaloric effect whereas Mn-doping increased it. This study shows that Mn precursor used for the acceptor doping affects the amount of Mn incorporated into the structure and therefore electrical properties of the resulting ceramics.
  • Article
    Citation - WoS: 5
    Citation - Scopus: 7
    Characterization and Separation Behavior of Multi-Layers in Aluminum-Rich Waste Pharmaceutical Blisters
    (Springer, 2023) Çapkın, İrem Yaren; Gökelma, Mertol
    Al-rich waste pharmaceutical blisters (WPBs) have a multi-layer structure that contains aluminum and polymer-based fractions. Although the aluminum mass in WPBs is less than typical aluminum packaging products such as beverage cans, establishing a feasible recycling procedure is possible by separating the fractions to recover both metal and plastic. Hydrometallurgical methods are mostly preferred for the separation of aluminum and plastic in multi-layered structures. This work reports the characterization of Al-rich WPBs and the separation behavior of aluminum and plastic layers. The effects of hydrochloric acid, acetic acid, formic acid, sulfuric acid, ethanol, acetone, and organic solvent (benzene–ethanol–water) on the separation behavior of layers were studied at different temperatures. Furthermore, the recycling yield of the aluminum fraction was experimentally assessed. © 2023, The Minerals, Metals & Materials Society.
  • Article
    Citation - WoS: 1
    Citation - Scopus: 2
    An Investigation on Inclusions Forming During Remelting of Aluminum and Magnesium Scraps Under a Salt Flux
    (Springer, 2023) Çapkın, İrem Yaren; Gökelma, Mertol
    Due to increasing environmental and economic concerns, the recycling of metals has been increasing in the last decades. Aluminum saves up to 95% of energy when recycled, and magnesium is one of the most common alloying elements in aluminum alloys, contributing to oxidation behavior. Both aluminum and magnesium have a high oxidation tendency during remelting, which raises the necessity for salt flux usage. Salt fluxes remove oxides and other surface contaminants from the target metal. Salt fluxes allow molten metal pieces to coagulate and form the molten bath. Furthermore, it prevents further oxidation of the metal. The presence of fluorides increases the metal yield by promoting coalescence. Although metals and salts are frequently interacting in such processes, there is still a lack of knowledge of the final and intermediate products of the interaction reactions. This study aims to contribute to the literature by investigating the interaction of aluminum and magnesium scraps with salt flux. As a result of the experiments, AlF3, MgF2, Al2O3, MgO, and MgAl2O4 were observed as the main phases in the aluminum and magnesium scraps dross. The presence of CaF2 in the salt flux, which is insoluble in water, was also observed in the analysis results. In addition, fluorine-containing compounds were observed as a result of chemical interactions among the F-, K-, and oxide layers.
  • Article
    Citation - WoS: 4
    Citation - Scopus: 5
    The Effect of Geometrical Characteristics of Tio2 Nanotube Arrays on the Photocatalytic Degradation of Organic Pollutants
    (Springer, 2023) Kartal, Uğur; Uzunbayır, Begüm; Doluel, Eyyüp Can; Yurddaşkal, Metin; Erol, Mustafa
    Highly ordered TiO2 nanotube arrays (TNAs) were fabricated by electrochemical anodization under varying durations and voltages. The effects of the anodizing parameters on geometrical properties were investigated. The results showed that as the anodizing time increased from 15 to 45 min, the length of the nanotubes increased, but there was no change in their diameter, hence the surface area increased while the open porosity did not change. When the effect of the anodizing voltage was examined, it was observed that both the length and diameter increased as the voltage increased from 15 to 45 V. Thus, a significant increase in open porosity and surface area was observed. The UV-Vis spectrophotometer was used to evaluate the effects of all geometrical characteristics on the photodegradation of methylene blue (MB). The results showed that the anodizing parameters were highly effective on the photocatalytic degradation of MB. With the decrease of the anodizing voltage, the photocatalytic activity increased because of the geometrical characteristics of TNAs. Accordingly, TNAs with the surface area of 25 m(2)/g and the open porosity of 35% obtained by anodizing for 45 min at 15 V showed the highest photocatalytic activity with a degradation efficiency of similar to 81% in 7 h.
  • Article
    Citation - WoS: 3
    Citation - Scopus: 4
    Development of Textured Lead-Free Nbt-Based Piezoelectric Materials in a Matrix, Synthesized by an Alternative Route, Via Templated Grain Growth
    (Springer, 2023) Çoban Tetik, Hatice Şule; Suvacı, Ender; Avcı, A. Murat; Adem, Umut; Karakaya, Merve
    In this study, (1−x)(K0.5Bi0.5TiO3-BaTiO3)−xNa0.5Bi0.5TiO3 KBT:BT = 2:1 where x = 0.8 (KBT-BT-NBT) (001) textured lead-free piezoelectric ceramics were fabricated using BT template by templated grain growth with tape casting. Unlike the commonly used matrix preparation method, which is the calcination of all raw materials in one step, the matrix phase was prepared in a different way by first preparing KBT, BT and NBT powders separately and then by calcining the mixtures of these powders, so that effect of the matrix, synthesized by this alternative route, on texture development properties was evaluated. In addition, the effect of BT template content on the grain orientation with different sintering temperature and time, structure evolution, phase stability and piezoelectric properties were investigated to assess the materials’ actuating performance. The highest Lotgering factor of 81% was achieved for the textured ceramics with 10 wt% BT templates sintered at 1150 °C for 48 h. Compared to the one-step synthesis method, similar Lotgering factor values were obtained at lower sintering temperatures in the matrix, synthesized by the alternative 2-step method. The highest piezoelectric constant, remnant polarization, strain value and depolarization temperature were also obtained from the same sample, as ~ 190 pC/N, 30 kV/cm, 25% at 50 kV/cm and ~ 165 °C, respectively. The results show that the textured, lead free K0.5Bi0.5TiO3-BaTiO3-Na0.5Bi0.5TiO3 (KBT-BT-NBT) ceramics that are developed by using the matrix, synthesized by the alternative 2-step method, can be very promising lead-free electroceramics for high performance actuator applications.
  • Article
    Citation - WoS: 10
    Citation - Scopus: 7
    Assessment of Melt Cleanliness of Secondary 5000 Aluminum Alloy Via Non-Metallic Inclusions Characterization
    (Springer, 2023) Li, Cong; Dang, Thien; Huang, Jinxian; Huang, Chunfa; Li, Jianguo; Friedrich, Bernd; Gökelma, Mertol
    The extensive energy consumption of primary aluminum production stimulates increasing need of producing primary-quality alloys with secondary sources, during which process amount of non-metallic inclusions (NMIs) in the alloy must be strictly controlled. In the present study funded by AMAP Open Innovation Research Cluster, NMIs generated during remelting a 5000 Al-Mg alloy was investigated to offer benchmarking characters of NMIs with respect to type, morphology, size, composition, and concentration. Under different remelting conditions NMIs formed in the melt ahead of solidification were concentrated using Porous Disc Filtration Apparatus (PoDFA) and characterized microstructurally and quantitatively. Investigated conditions included heating cycle, organic contaminations, and refractory materials. Results suggested oxide films and cuboid particles as typical oxides with, respectively, different compositions. The amount of formed oxides declined with the increase of heating rate. With respect to aluminum carbide (Al4C3), organic contaminations were confirmed to lead to an increased amount of its formation. The carbon-containing refractory material contributed more significantly than organic contaminations on the formation of Al4C3 at melt temperatures over 760 & DEG;C. Formulas were derived based on trial results to enable translation of NMIs PoDFA value [mm(2)/kg] into their mass fraction [ppm] in the melt.
  • Article
    Citation - WoS: 49
    Citation - Scopus: 54
    Highly Porous Poly(o-Phenylenediamine) Loaded Magnetic Carboxymethyl Cellulose Hybrid Beads for Removal of Two Model Textile Dyes
    (Springer, 2022) Arıca, Tuğçe Aybüke; Balcı, Fadime Mert; Balcı, Sinan; Arıca, Mehmet Yakup
    Ensuring the removal of complex dyes from wastewater is a topic of great interest as it is vital for the environment. The present study reports a facile preparation method for poly(o-phenylenediamine) [p(o-PDA)] micro-particles loaded to magnetic carboxymethyl cellulose (CMC) hydrogel beads as adsorbents. The prepared products were characterized by FTIR, TGA, VSM, SEM, BET, and zeta sizer. The Fe3O4@p(o-PDA)@CMC beads were used for the removal of Reactive Blue 4 (RB-4) and Congo Red (CR) textile dyes from an aqueous medium. Different factors, such as adsorbent dose, initial pH, ionic strength, contact time, temperatures, and initial RB-4 and CR concentrations were examined. The maximum adsorption capacities of the RB-4 dye and CR at optimum pH 5 reached 398.7 and 524.6 mg/g in 120 min, respectively. The adsorption of RB-4 and CR on the hybrid magnetic beads can be due to the electrostatic, hydrogen bonding, and π-π interactions. Moreover, the magnetic hybrid beads showed easy regeneration ability and good reusability. The adsorbent can be a very good candidate for the efficient removal of micro-pollutant from wastewater.
  • Article
    Citation - WoS: 9
    Citation - Scopus: 9
    Polymer-derived ceramic molten metal filters
    (Springer, 2022) Dizdar, Kerem Can; Kulkarni, Apoorv; Dışpınar, Derya; Soraru, Gian Domenico; Ahmetoğlu, Çekdar Vakıf; Semerci, Tuğçe
    This paper reports the synthesis and the performance of polymer-derived ceramic filters for molten metal filtration. Two different filter types were studied: foam filters produced from flexible polyurethane (PU) foams and additive manufacturing (AM) filters produced from thermoplastic polyurethane (TPU) cellular structure, and the results from all filter types were compared with that of the commercially used SiC foam filters. In both cases, the urethane-based polymeric template was impregnated with the preceramic solution, followed by pyrolysis. The produced ceramic components were then used to filter a molten Al alloy (A357), and the resulting Al samples were characterized for their mechanical properties. When filters were used, more reproducible and reliable mechanical properties were achieved compared to the samples obtained without any filtration. Among the different filters tested, the foam filters demonstrated better performance in comparison with the AM ceramic filters due probably to the three-dimensional interconnected porosity compared with the unidirectional cellular structure of the AM ceramic filters.
  • Article
    Citation - WoS: 9
    Citation - Scopus: 9
    Zno Nanostructures for Photocatalytic Degradation of Methylene Blue: Effect of Different Anodization Parameters
    (Springer, 2022) Öksüz, Ahmet Emrecan; Yurddaşkal, Metin; Kartal, Uğur; Dikici, Tuncay; Erol, Mustafa
    In this paper, the photocatalytic activity of ZnO nanostructures formed by anodization method with different parameters was investigated. The synthesis of ZnO nanostructures with different morphology by varying anodic oxidation parameters containing electrolytes, molarity, voltage, and duration was analyzed. ZnO nanostructures were prepared through different parameters consisting of six samples. The produced ZnO nanostructures were investigated by using X-ray diffraction, scanning electron microscopy, diffuse reflectance spectroscopy, and UV-Vis spectrophotometer. It was found that the morphology of ZnO structures was formed as nanorods, needle-like, flower-like, heterogeneous, and homogeneous of mixed structures. ZnO nanostructures were identified by matching X-Ray diffraction peaks due to the international center for diffraction data database. Experiments on photocatalytic degradation of methylene blue demonstrated that the photocatalytic activity of ZnO samples. The best photocatalytic performance was observed by the sample anodized for an hour in 0.05 M of KHCO3 electrolytes with 40 V electrical potential. It was observed that the removal of methylene blue increased 3 times (photocatalytic degradation efficiency similar to 31% for methylene blue vs similar to 90% by the best sample) thanks to the obtained ZnO nanostructured photocatalysts. The results showed that an increment of the voltage has a significant effect on the photocatalytic activity of ZnO while keeping other parameters including molarity, time, and electrolyte type constant.