Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
36 results
Filters
Settings
Search Results
Article Citation - WoS: 1Citation - Scopus: 1Bioavailability Assessment of the Novel Gsh-Functionalized Feb Nanoparticles Via Oxidative Stress and Trace Element Metabolism in Vitro: Promising Tools for Biomedical Applications(Springer, 2024) Aydemir, Duygu; Aribuga, Dilara; Hashemkhani, Mahshid; Acar, Havva Yagci; Çağıran, Özge Balcı; Ulusu, Nuriye NurayIron-based magnetic nanoparticles (NPs) have attracted significant attention in biomedical research, particularly for applications such as cancer detection and therapy, targeted drug delivery, magnetic resonance imaging (MRI), and hyperthermia. This study focuses on the synthesis and glutathione (GSH) functionalization of iron boride (FeB) nanoparticles (NPs) for prospective biomedical use. The GSH-functionalized FeB NPs (FeB@GSH) demonstrated ferromagnetic behavior, with a saturation magnetization (Ms) of 45.8 emu/g and low coercivity (Hc = 1000 Oe), indicating desirable magnetic properties for biomedical applications. Transmission electron microscopy (TEM) analysis of the FeB@GSH revealed well-dispersed nanoparticles with diameters smaller than 30 nm. Comprehensive nanotoxicity and biocompatibility assessments were performed using various healthy and cancer cell lines, including 293 T, HeLa, 3T3, MCF7, HCT116, and CFPAC-1. Cytotoxicity assays were conducted on FeB@GSH-treated cells over a dose range of 0-300 mu g/mL during 24-h incubations. Results indicated no significant differences in cell viability between treated and untreated control groups, confirming the biocompatibility of FeB@GSH. Further nanotoxicity evaluations were carried out on 3T3, 293 T, and CFPAC-1 cell lines, focusing on oxidative stress markers and cellular metabolism by measuring antioxidant enzyme activity. Additionally, ion release and mineral metabolism were assessed using inductively coupled plasma mass spectrometry (ICP-MS), revealing no notable variations between the treated and control groups. These findings suggest that FeB@GSH NPs exhibit excellent biocompatibility, making them promising candidates for diverse biomedical applications, including medical imaging, drug delivery systems, and therapeutic interventions.Article Citation - Scopus: 3A Brief Overview on Geothermal Scaling(General Directorate of Mineral Research and Exploration (MTA), 2023) Isık, Tuğba; Baba, Alper; Chandrasekharam, Dornadula; Demir, Mustafa M.; Isık, Tuğba; Baba, Alper; Demir, Mustafa MuammerHot spring waters are rich in terms of minerals. Since there are dramatic changes in thermodynamic parameters in geothermal power plants, such as a decrease in temperature and pressure, severe precipitation occurs throughout the system components in an uncontrolled manner. There are three main chemistries in deposits: carbonates (mainly calcium carbonates), silicates (metal silicates), and sulphides (antimony sulphide-stibnite). Energy harvesting is remarkably reduced out of the insulating nature of the deposit. Various actions need to be taken to mitigate this undesirable issue of scaling in geothermal systems. Geothermal systems are in fact quite complex, and the composition of brine and, accordingly, the chemistry of the deposit are not identical. Therefore, each system should be studied individually, and a tailor-made remedy should be developed. In this overview, the types of deposits in terms of chemistry and the actions (pH modification or antiscalant dosing) that should be taken to reduce scaling are mentioned, and potential chemistries of antiscalants are given.Article Citation - WoS: 1Citation - Scopus: 1Effect of Compaction and Fluoride Content on the Remelting Efficiency of Pure Magnesium Chips(Taylor & Francis, 2023) Yörük, Pınar; Gökelma, Mertol; Derin, BoraMagnesium is widely used in industries, such as automotive, aerospace, and medical fields. The demand on magnesium has been growing, although the production and melt treatment is complex due to strong oxidation tendency. Recycling of magnesium scraps is crucial due to the criticality of magnesium-containing raw materials in Europe as well as increasing environmental concerns. Remelting of magnesium is typically conducted under a salt flux which absorbs the impurities and protects the melt against oxidation. This study investigates the effect of compaction, fused salt flux, and salt composition on remelting behavior of magnesium chips. Metal yield and coagulation efficiency were calculated after remelting, and samples were characterized by using Scanning Electron Microscope and X-ray Diffraction. The liquidus temperature and density of fluxes were analyzed by FactSage software. Remelting of compacted chips under a fused salt flux with 5 wt.% CaF2 showed the highest magnesium recovery with a yield of 97.7%. Le magnesium est largement utilise dans une variete d'industries, telles que les domaines de l'automobile, de l'aerospatiale et de la medecine. La demande en magnesium s'est accrue, bien que la production et le traitement du bain soient complexes en raison de sa forte tendance a l'oxydation. Le recyclage des dechets de magnesium est crucial en raison de la criticite des matieres premieres contenant du magnesium en Europe ainsi que des preoccupations environnementales croissantes. La refusion du magnesium est effectuee typiquement sous un flux de sel qui absorbe les impuretes et protege le bain contre l'oxydation. Cette etude examine l'effet du compactage, du flux de sel fondu et de la composition du sel sur le comportement a la refusion des copeaux de magnesium. On a calcule le rendement en metal et l'efficacite de la coagulation apres des experiences de refusion, et l'on a caracterise les echantillons a l'aide d'un microscope electronique a balayage et de la diffraction des rayons X. On a analyse la temperature du liquidus (Tliq) et la densite des flux de sel avec le logiciel FactSage. La refusion des copeaux compactes sous un flux de sel fondu avec 5% en poids de CaF2 a montre la recuperation de magnesium la plus elevee avec un rendement de 97.7%Article Citation - WoS: 5Citation - Scopus: 7Characterization and Separation Behavior of Multi-Layers in Aluminum-Rich Waste Pharmaceutical Blisters(Springer, 2023) Çapkın, İrem Yaren; Gökelma, MertolAl-rich waste pharmaceutical blisters (WPBs) have a multi-layer structure that contains aluminum and polymer-based fractions. Although the aluminum mass in WPBs is less than typical aluminum packaging products such as beverage cans, establishing a feasible recycling procedure is possible by separating the fractions to recover both metal and plastic. Hydrometallurgical methods are mostly preferred for the separation of aluminum and plastic in multi-layered structures. This work reports the characterization of Al-rich WPBs and the separation behavior of aluminum and plastic layers. The effects of hydrochloric acid, acetic acid, formic acid, sulfuric acid, ethanol, acetone, and organic solvent (benzene–ethanol–water) on the separation behavior of layers were studied at different temperatures. Furthermore, the recycling yield of the aluminum fraction was experimentally assessed. © 2023, The Minerals, Metals & Materials Society.Article Citation - WoS: 1Citation - Scopus: 2An Investigation on Inclusions Forming During Remelting of Aluminum and Magnesium Scraps Under a Salt Flux(Springer, 2023) Çapkın, İrem Yaren; Gökelma, MertolDue to increasing environmental and economic concerns, the recycling of metals has been increasing in the last decades. Aluminum saves up to 95% of energy when recycled, and magnesium is one of the most common alloying elements in aluminum alloys, contributing to oxidation behavior. Both aluminum and magnesium have a high oxidation tendency during remelting, which raises the necessity for salt flux usage. Salt fluxes remove oxides and other surface contaminants from the target metal. Salt fluxes allow molten metal pieces to coagulate and form the molten bath. Furthermore, it prevents further oxidation of the metal. The presence of fluorides increases the metal yield by promoting coalescence. Although metals and salts are frequently interacting in such processes, there is still a lack of knowledge of the final and intermediate products of the interaction reactions. This study aims to contribute to the literature by investigating the interaction of aluminum and magnesium scraps with salt flux. As a result of the experiments, AlF3, MgF2, Al2O3, MgO, and MgAl2O4 were observed as the main phases in the aluminum and magnesium scraps dross. The presence of CaF2 in the salt flux, which is insoluble in water, was also observed in the analysis results. In addition, fluorine-containing compounds were observed as a result of chemical interactions among the F-, K-, and oxide layers.Article Citation - Scopus: 10Development of Lightweight Geopolymer Composites Containing Perlite and Vermiculite(International OCSCO World Press, 2023) Korniejenko, Kinga; Pławecka, Kinga; Bulut, Alperen; Şahin, Baran; Azizağaoğlu, Göksu; Figiela, BeataPurpose: The aim of this work was to prepare and characterise geopolymer composites containing lightweight aggregates-perlite and vermiculite. Design/methodology/approach: The geopolymer matrix was prepared on the basis of fly ash, sand and a 6M sodium hydroxide solution with sodium silicate. The properties of the materials were tested 28 days after the preparation of the samples. The following research methods were used to characterise the composites: compressive and flexural strength tests, microstructural tests using a scanning electron microscope, and thermal conductivity were measured. Findings: The results obtained showed a slight effect of the additives on the strength properties. Lightweight aggregates are characterised by good coherence with the matrix material. Their addition allowed to reduce the density and lowered the thermal conductivity of the materials. The results obtained indicate that the proposed additives can improve the properties of the geopolymer composite for use in the construction industry. Research limitations/implications: Further research should focus on geopolymer composites with perlite and involve fire-resistant and water-absorption tests. Practical implications: The production of lightweight building materials brings a number of benefits, such as reducing the density of building elements and, at the same time, the entire structure, which results in a reduction in their weight, as well as lower transport costs. Such elements have better thermal and acoustic insulation, reflected in the parameters of buildings. An additional advantage is the reduced environmental impact through better insulation properties, lower fuel consumption during transport, etc. Originality/value: The density of the material can be reduced by using lightweight aggregates or obtaining porous material in the foamed process. In the case of geopolymer composites, a number of studies related to foamed materials have been provided, but there is only a few previous research connected with lightweight aggregates such as perlite and vermiculite. © by International OCSCO World Press. All rights reserved. 2023.Article Citation - WoS: 5Citation - Scopus: 6Effect of Coiling Temperature on the Structure and Properties of Thermo-Mechanically Rolled S700mc Steel(Technical Faculty in Bor, 2022) Di Nunzio, P. E.; Cesile, M. C.; Oktay, S.; Davut, Kemal; Şeşen, M. K.The boron-free S700MC steel is usually produced by exploiting the properties of a ferrite-bainite mixed microstructure formed by coiling the strips at a temperature of about 450 degrees C, i.e.below the bainite starting temperature. With the aim of further enhancing the mechanical properties of 6 to 10 mm thick strips, industrial tests were carried out at a coiling temperature of 600 degrees C to promote the formation of a structure of ferrite and carbides, which is also acceptable for this type of steel. Unexpectedly, a microstructure composed of ferrite and martensite was obtained. Compared to the ferritic-bainitic grade, the new structure is characterized by a slight decrease of the yield point but by an increase of the ultimate tensile strength by no less than 80 MPa, with a transition from a quasi-discontinuous to a clearly continuous yielding behaviour. Accordingly, the ratio of yield strength to tensile strength decreases from 0.90 to 0.75 and the impact energy decreases by 35 J and 60 J for the two gauge levels, respectively. The mechanical behaviour of the strips coiled at high temperature is explained as a direct consequence of the dual phase structure with a hard phase interspersed in a soft ferrite matrix. The presence of martensite is explained by the so-called incomplete bainite reaction. The partial transformation into ferrite after coiling and the long time required for the coil to cool down stabilize the untransformed austenite due to the carbon enrichment making bainite formation at lower temperatures impossible.Article Citation - WoS: 1Citation - Scopus: 1Influence of Processing Method of Cocrmo Dental Alloy on the Corrosion Behavior in Artificial Saliva(Wiley, 2022) Pontes, Joana R.; Pinto, Ana M. P.; Ariza, Edith; Alves, Alexandra C.; Toptan, FatihRemovable or fixed dental frameworks are usually made of CoCr alloys. The CoCr dental alloys are produced traditionally by lost-wax casting. However, alternative processing routes, such as hot-pressing, are being studied for dental applications. The purpose of the present work was to assess the corrosion resistance of CoCrMo dental alloy produced by conventional lost-wax casting and hot-pressing. The corrosion behavior was studied in artificial saliva at 37°C by potentiodynamic polarisation tests. Immersion tests were performed to evaluate the growth of the passive film where electrochemical impedance spectroscopy was used at different immersion periods. Results showed slightly better corrosion resistance in terms of ipass for CoCrMo samples obtained by hot-pressing. On the other hand, the immersion tests showed a more stable and thicker passive film formed on hot-pressed CoCrMo dental alloy, pointing out that hot-pressing may be considered a promising technique to produce CoCrMo dental structures.Article Citation - WoS: 1Citation - Scopus: 2Preparation and Photocatalytic Performances of Zno Nanostructures: Effects of Anodization Voltage and Time(Wiley, 2022) Öksüz, Ahmet Emrecan; Yurddaşkal, Metin; Doluel, Eyyup Can; Kartal, Uğur; Dikici, TuncayIn this study, ZnO nanostructures with different morphologies were produced by varying anodizing parameters (time and voltage), and the photocatalytic activities of these structures were examined. ZnO nanostructures were fabricated through different voltage and duration consisting of nine samples with KHCO3 solution as an electrolyte. The produced ZnO nanostructures were investigated by using X-ray diffraction (XRD), scanning electron microscopy, X-ray photoelectron spectroscopy, and UV–vis spectrophotometer. It was found that the morphology of ZnO was formed as nanosponge, nanoflower, nanowire, heterogeneous structures. ZnO nanostructures were identified by matching XRD peaks due to the ICDD database. Experiments on photocatalytic degradation of methylene blue demonstrated the photocatalytic activity of ZnO samples. The best photocatalytic performance of the samples was observed by S1 sample, which was anodized for 30 min in 0.05 M of KHCO3 electrolyte at 20 V, after 420 min exposure of the UV–vis light source with the degradation rate of 87.3%. Such ZnO nanostructures exhibit unique properties and have high potential for wastewater treatment.Article Citation - WoS: 2Citation - Scopus: 1Effects of Electrospraying Parameters on Deposition of La0.3sr0.7fe0.7cr0.3o3−δ Cathode Layer on Gdc(Wiley, 2022) Akkurt, Sedat; Sındıraç, Can; Özmen Egesoy, Tuğçe; Atıcı, Gökçe; Erişman, Elif; Erğen, Emre; Büyükaksoy, AligülHigh performance in intermediate temperature solid oxide fuel cells requires improvements especially in the microstructure of the cathode layer. New cobalt-free cathode materials are used because cobalt-containing cathodes have higher thermal expansion coefficients, poor long-term chemical stability, and lower mechanical stability. Recently cobalt-free cathodes have been proposed to solve these issues by using deposition methods other than electrospray deposition (ESD). In this study, ESD method is used to develop a cobalt-free cathode layer. The electrolyte layer is gadolinium-doped ceria that is deposited with La0.3Sr0.7Fe0.7 Cr0.3O3−δ (LSFCr) prepared by 2-butoxyethanol and ethylene glycol solvents as opposed to conventional solvents. Experimental ESD parameters are tested at different levels and combinations by applying statistical experimental design methods to optimize the microstructure. Coating deposited as such demonstrated higher electrochemical performance than similar electrodes fabricated by other methods.