Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
15 results
Search Results
Conference Object Citation - WoS: 1Citation - Scopus: 1Assessment of Separation and Agglomerationt Tendency of Non-Metallic Inclusions in an Electromagnetically Stirred Aluminum Melt(Springer international Publishing Ag, 2023) Li, Cong; Dang, Thien; Gokelma, Mertol; Zimmermann, Sebastian; Mitterecker, Jonas; Friedrich, BerndPresence of non-metallic inclusions (NMIs) reduces surface quality and mechanical properties of aluminum products. The development of good NMIs removal practices relies on the understanding of inclusion behaviors with respect to separation and agglomeration particularly in the turbulent flow. In the scenario of electromagnetically induced recirculated turbulent flow, the concerned behaviors of inclusions with different sizes have rarely been investigated experimentally. In the presented study funded by AMAP Open Innovation Research Cluster, reference materials were prepared with uniformly distributed NMIs (SiC and MgAl2O4) via an ultrasoundinvolved casting route. Reference materials were charged into an aluminum melt where turbulent flow was promoted via electromagnetic force. Microscopical analysis shows non-significant agglomeration tendency of SiC, MgAl2O4, and TiB2 inclusion. Time-weight filtration curve, PoDFA, and Spark Spectrometer results suggest a strong dependence of separation rate on particle size. Analytical models were established to estimate the collision rate of particles and to evaluate separation probability of different sized particles.Article Citation - WoS: 3Citation - Scopus: 5Temperature Dependent Electrical and Electrocaloric Properties of Textured 0.72pmn-0.28pt Ceramics*(Taylor & Francis, 2021) Böbrek, İrem; Berksoy Yavuz, Ayşe; Kaya, M. Yunus; Alkoy, Sedat; Okatan, Mahmut Barış; Mısırlıoğlu, İbrahim Burç; Mensur Alkoy, EbruLead magnesium niobate (PMN) - lead titanate (PT) solid solution ceramics in the ratio of 0.72PMN-0.28PT was produced by a combination of tape-casting in ⟨001⟩(pc) textured and random forms. The Lotgering factor, f, of textured ceramics was approximately calculated as 80%. Modified Curie-Weiss analysis indicated relaxor dominant behavior for both the random and textured ceramics. Development of texture led to an enhancement in the electromechanical properties with converse piezoelectric charge coefficient (d(33)*) under 20 kV/cm electric field reaching 545 pm/V for the textured ceramic. Electrocaloric (EC) behavior of random and textured ceramics were obtained from indirect measurements using temperature dependent polarization vs. electric field hysteresis loops. An EC temperature change (Delta T-EC) of similar to 0.5 K was calculated from the PMN-28PT ceramics at around 80 degrees C under an electric field of 60 kV/cm. Development of texture was demonstrated to have led to an anisotropy in the EC response.Conference Object Pre-Study of the Dissolution Behavior of Silicon Kerf Residue in Steel(Springer, 2022) Lazou, Adamantia; Nilssen, David; Gökelma, Mertol; Wallin, Maria; Tranell, GabriellaSilicon kerf residue is generated during the wafering process of pure silicon in the photovoltaic value chain. The generated by-product has a high volume, and the particle size is typically below 1 μm. Although the fine particles are partly oxidized, the material may be beneficial in different metallurgical applications such as grain refining and alloy composition adjustments. This work studies the dissolution behavior of silicon kerf in low alloy steel melts with the aim to upcycle the kerf material in the steel industry for different purposes. In this study, a steel alloy and the kerf residue were melted (at 1580 °C) in an alumina crucible placed in an induction furnace. The amount of added kerf residue was varied. The behavior of the particles in the solidified alloy was characterized by using an optical microscope, electron probe microscope (EPMA), and wavelength-dispersive X-ray spectroscopy (WDS) in order to study the dissolution behavior of the Si-kerf residue in the steel.Conference Object Citation - WoS: 2Citation - Scopus: 1The Influence of the Casting Speed in Horizontal Continuous Casting of Aluminium Alloy En Aw 6082(Springer, 2021) Obalı, Akın; Dilek, Kerem Ahmet; Akdi, Seracettin; Ürk, Deniz Kavrar; Gökelma, MertolVertical direct chill (VDC) casting is commonly used to produce slabs and billets from wrought aluminium alloys. The fact that the VDC is not a continuous process and moulds must be prepared for the next batch decreases the productivity of the process. Alternatively, horizontal direct chill (HDC) casting simplifies the process and allows a continuous production. The casting speed in the HDC casting is easier to control and can be optimized for different alloys by changing the speed. This study focuses on investigating the effects of casting speed on the macrostructure of 6082 aluminium billets with 60 mm diameter. A demo-scale casting unit was used and the casting speed was changed from 310 to 385 mm/min. Changes in surface condition, macrocracks, microporosity, and diameter of the billets were investigated. Surface quality of the billets became better with the increasing casting speed, while diameter of the billet expands. Furthermore, centreline cracks appear at the casting speed of 355 mm/min. © 2021, The Minerals, Metals & Materials Society.Article Citation - WoS: 3Citation - Scopus: 3Investigations of Flame Retardant Properties of Zinc Borate Accompanying With Huntite and Hydromagnesite in Polymer Composites(Polish Mineral Engineering Society, 2020) Atay, Hüsnügül Yılmaz; İçin, Öykü; Kuru, BuketFires have been a danger to human beings for the centuries. As people lost their lives and property in fires, they tried to fight the fire and their efforts in this area continued increasingly. Unfortunately, it is still not possible to completely reset the risk of starting the fire. But it seems likely to extinguish immediately after the fire has started, and this is very important to save people's lives. Scientists have been working in this field in recent years; they are concentrated on producing fire-resistant materials using different materials. This can be provided by different ways; either fire-resistant material can be produced new, or the fire resistivity can be provided by incorporating the additive material into a flammable material. In our previous studies, we used huntite and hydromagnesite minerals to give fire resistance property to polymer materials, very successful results were obtained. In this study, huntite and hydromagnesite minerals were used for accompanying with zinc borate in polypropylene composites in order to increase the flame retardant property of a polymeric materials. Different content of minerals were blended with polypropylene, and composites were produced by twin-screw extruder for observing synergistic effect. Scanning electron microscopy (SEM) analyses were conducted to determine the structural and morphological properties of the composites. Thermal properties were determined according to thermogravimetric analysis (TGA). Tensile and three point bending tests were carried out to obtain mechanical properties. Flame retardant performance was evaluated according to UL 94 vertically flammability test. It was concluded that very good synergistic effects were obtained that zinc borate was significantly influential with huntite/hydromagnesite in the flammability characteristics of composites because higher char formation is observed with zinc borate addtion. Moreover, the zinc borate reduced the smoke generated during combustion.Article Citation - WoS: 13Citation - Scopus: 14Landau, Ginzburg, Devonshire and Others(Taylor & Francis, 2020) Levanyuk, Arkady P.; Mısırlıoğlu, İbrahim Burç; Barış Okatan, MahmutMacroscopic modeling of ferroelectric properties refers usually to Landau-Ginzburg-Devonshire theory. This paper questions the meaningfulness of this term, discussing contributions of the three authors in the title to what is supposed to be a theory. The limitations of every contribution are analysed. In the main text and, to more extent in the Supplementary Material, the Landau theory is presented from an unusual perspective starting from simple mechanical models of spontaneous symmetry breaking and finishing by the Ising model. The aim of the presentation is to emphasize along with the qualitative breakthroughs the approximate character of macroscopic modeling associated with the above three authors. © 2020 Taylor & Francis Group, LLC.Article Citation - WoS: 18Citation - Scopus: 17Cnt Incorporated Polyacrilonitrile/Polypyrrole Nanofibers as Keratinocytes Scaffold(Trans Tech Publications, 2019) İnce Yardımcı, Atike; Aypek, Hande; Öztürk, Özgür; Yılmaz, Selahattin; Özçivici, Engin; Meşe, Gülistan; Selamet, YusufPolypyrrole (PPy) is an attractive scaffold material for tissue engineering with its non-toxic and electrically conductive properties. There has not been enough information about PPy usage in skin tissue engineering. The aim of this study is to investigate biocompatibility of polyacrilonitrile (PAN)/PPy nanofibrous scaffold for human keratinocytes. PAN/PPy bicomponent nanofibers were prepared by electrospinning, in various PPy concentrations and with carbon nanotube (CNT) incorporation. The average diameter of electrospun nanofibers decreased with increasing PPy concentration. Further, agglomerated CNTs caused beads and disordered parts on the surface of nanofibers. Biocompatibility of these PAN/PPy and PAN/PPy/CNT scaffolds were analyzed in vitro. Both scaffolds provided adhesion and proliferation of keratinocytes. Nanofiber diameter did not significantly influence the morphology of cells. However, with increasing number of cells, cells stayed among nanofibers and this affected their shape and size. In this study, we demonstrated that PAN/PPy and PAN/PPy/CNT scaffolds enabled the growth of keratinocytes, showing their biocompatibility.Conference Object Citation - Scopus: 1Spontaneous Adhesion of Dopa and Tryptophan Functionalized Peg To Polystyrene Nanobeads: an Epr Study(Trans Tech Publications, 2018) Göksel, Yaman; Kırpat, İklima; Akdoğan, YaşarWet adhesion is achieved by mussels so naturally. Their adhesion mechanism has inspired scientists to obtain wet adhesives for a long time. The amino acid 3,4-dihydroxyphenylalanine (DOPA) produced by mussels adheres to different types of surfaces and also contributes to cohesive interactions. Here, we showed the spontaneous adhesion of DOPA functionalized four armed poly(ethylene glycol) (PEG) polymer to spin labeled polystyrene (SL-PS) nanosurfaces by electron paramagnetic resonance (EPR) spectroscopy. In addition to DOPA, adhesion property of another amino acid of tryptophan (Trp) was studied. Trp attached four armed PEG polymers did not adhere to the surface of SL-PS in the force free condition. However, two armed DOPA and two armed Trp functionalized PEG adhere to the PS.Conference Object Citation - Scopus: 3Investigation of Lithium Sorption Efficiency Using Swcnt Functionalized Electrospun Fiber Mats From the Hypersaline Geothermal Brine(Trans Tech Publications, 2018) Çelik, Aslı; Topçu, Gökhan; Isık, Tuğba; Baba, Alper; Horzum, Nesrin; Demir, Mustafa MuammerGeothermal mining from brines becomes increasingly important with the increasing demand for rare earth elements in various engineering applications. Geothermal fluids contain valuable minerals and metals such as silica, zinc, lithium, and other materials that can be processed to recover these products. Solution mining by nature is challenging because of variable composition as well as the concentration of the interfering ions, particularly calcium and magnesium, and the presence of interfering ions increases the recovery costs requiring additional steps. The aim of this study is the fabrication of single-walled carbon nanotube functionalized electrospun chitosan, poly(methyl methacrylate) (PMMA), and polyacrylonitrile (PAN) fiber mats. Effect of polymer type, dilution factor, and surface modification on the sorption of lithium (Li+) ions was investigated. The maximum sorption performance was obtained with SWCNT functionalized PAN (15 wt%) fiber mats and they have sorption percentage as 55% at diluted (1/100) brine samples.Conference Object The Shape and Size Effect of the Diatom Frustule Addition on the Compression Behavior of an Epoxy(Trans Tech Publications, 2018) Zeren, Doğuş; Kesici, Kutsal; Sukatar, Atakan; Güden, MustafaThe effects of the Achnanthes Taeniata and the diatomaceous earth (diatomite) frustules addition on the compressive strength of an epoxy matrix were investigated experimentally. The Achnanthes Taeniata frustules having relatively high length/diameter aspect ratio (2-4) were isolated and cultured in laboratory. While the as-received commercial natural diatomite frustules were non-homogenous in shape and size. The filling epoxy matrix with ~6 wt% of commercial natural diatomite increased the compressive strength from 60 MPa to 67 MPa, while the Achnanthes Taeniata frustules addition increased to 79 MPa. The increased compressive strength and modulus of the the Achnanthes Taeniata frustules filled epoxy was attributed to the higher aspect ratio and relatively strong bonding with the epoxy matrix. The more effective load transfer from the matrix to the Achnanthes Taeniata frustules associated with the enhanced interface bonding was also proved microscopically. The frustules were observed to pull-out on the fracture surface of the Achnanthes Taeniata frustules filled epoxy.