Materials Science and Engineering / Malzeme Bilimi ve Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4719
Browse
8 results
Search Results
Article Citation - WoS: 7Citation - Scopus: 7Breaking the Boundaries of the Goldschmidt Tolerance Factor With Ethylammonium Lead Iodide Perovskite Nanocrystals(American Chemical Society, 2024) Güvenç, Çetin Meriç; Toso, Stefano; Ivanov, Yurii P.; Saleh, Gabriele; Balcı, Sinan; Divitini, Giorgio; Manna, LiberatoWe report the synthesis of ethylammonium lead iodide (EAPbI3) colloidal nanocrystals as another member of the lead halide perovskites family. The insertion of an unusually large A-cation (274 pm in diameter) in the perovskite structure, hitherto considered unlikely due to the unfavorable Goldschmidt tolerance factor, results in a significantly larger lattice parameter compared to the Cs-, methylammonium- and formamidinium-based lead halide perovskite homologues. As a consequence, EAPbI3 nanocrystals are highly unstable, evolving to a nonperovskite delta-EAPbI3 polymorph within 1 day. Also, EAPbI3 nanocrystals are very sensitive to electron irradiation and quickly degrade to PbI2 upon exposure to the electron beam, following a mechanism similar to that of other hybrid lead iodide perovskites (although degradation can be reduced by partially replacing the EA+ ions with Cs+ ions). Interestingly, in some cases during this degradation the formation of an epitaxial interface between (EA x Cs1-x )PbI3 and PbI2 is observed. The photoluminescence emission of the EAPbI3 perovskite nanocrystals, albeit being characterized by a low quantum yield (similar to 1%), can be tuned in the 664-690 nm range by regulating their size during the synthesis. The emission efficiency can be improved upon partial alloying at the A site with Cs+ or formamidinium cations. Furthermore, the morphology of the EAPbI3 nanocrystals can be chosen to be either nanocube or nanoplatelet, depending on the synthesis conditions.Article Citation - WoS: 10Citation - Scopus: 9Recyclability of Cspbbr3 Quantum Dot Glass Nanocomposites for Their Long-Standing Use in White Leds(2022) Vahedigharehchopogh, Naji; Erol, Erdinç; Kıbrıslı, Orhan; Genç, Aziz; Çelikbilek Ersundu, Miray; Ersundu, Ali ErçinThe embedding of CsPbBr3 perovskite quantum dots (PQDs) in an inorganic glass matrix not only protects them against chemical, thermal, and photodegradation but also provides an effective strategy to isolate toxic elements such as Pb from the environment for a long period of time. Herein, the recyclability of glass is another important feature that contributes to environmental sustainability. Hence, effective and efficient recycling technologies are needed for the widespread use of PQD glass nanocomposites (GNCs) in many commercial applications. However, studies on the recyclability of CsPbBr3 PQD GNCs have not been conducted so far. Therefore, in this work, we investigate the structural, thermal, optical, and photoluminescence properties of recycled CsPbBr3 PQD GNCs to assess their suitability as long-standing and reusable luminescent materials. For this purpose, the recyclability of GNCs is checked by three repeated melt-quenching and subsequent heat-treatment processes. Although the color emission properties of GNCs under the same heat-treatment conditions show a slight variation after each recycling step, PQD GNCs almost retain their PLQY even after the last recycling step. Ultimately, a prototype white light-emitting diode is constructed by coupling recycled PQD GNCs and a commercial red phosphor on top of a blue LED chip showing high-performance with CIE color coordinates of x = 0.3228, y = 0.3470 and a CCT value of 5920 K. The findings of this work reveal that the recyclability of PQD GNCs holds great promise for a more sustainable technology.Article Citation - WoS: 9Citation - Scopus: 18Improvement of Photophysical Properties of Cspbbr3 and Mn2+:cspb(br,cl)(3) Perovskite Nanocrystals by Sr2+ Doping for White Light-Emitting Diodes(American Chemical Society, 2022) Yüce, Hürriyet; Mandal, Mukunda; Yalçınkaya, Yenal; Andrienko, Denis; Demir, Mustafa MuammerAll-inorganic metal halide perovskite nanocrystals (NCs) having the general formula ABX(3), where A is a monovalent cation, for example, Cs+, B is a divalent cation, typically Pb2+, and X is Cl-, Br-, I-, or their binary mixture, show potential in optoelectronic devices. In this work, we explore the effect of B-site doping on the optoelectronic properties of CsPbX3 NCs (X = Br, Cl). First, the Pb2+ ions in the pristine CsPbBr3 NC are partially substituted by Mn2+ ions. The alkaline earth metal strontium is then doped on both pristine and the Mn2+-substituted NCs. We found that a small percentage of Sr2+ doping remarkably improves the photoluminescence quantum yield of CsPbBr3 and Mn2+-state emission in Mn2+:CsPb(Br,Cl)(3) NCs. Perovskite NC film/ poly(methyl methacrylate) composites with all four NC variants were used in a white light-emitting diode (WLED), where Sr2+ doping increased the luminous efficiency of the WLED by similar to 4.7%. We attribute this performance enhancement to a reduced defect density and an attenuated microstrain in the local NC structure.Article Citation - WoS: 3Citation - Scopus: 5Plasmon-Induced Spectral Tunability of Perovskite Nanowires(Elsevier, 2021) Gökbulut, Belkıs; Topçu, Gökhan; Demir, Mustafa Muammer; İnci, Mehmet NaciIn this paper, plasmon-assisted spectral tunability in random media, composed of Perovskite (CsPbBr3) nanowires surrounded by Au nanoparticle clusters in polystyrene matrix, is achieved. The interaction between the surface plasmons and the quantum sources is observed to generate photoluminescence from the higher excited state energy levels of the excited semiconductor nanowires, which results in a blueshifted fluorescence emission of 50 nm. The localized surface plasmon properties are also determined to be tuned by plasmonic pumping of the quantum sources at different resonant frequencies. Thus, the first observation of the tunable blueshifted fluorescence emission of the semiconductor nanocrystals surrounded by plasmonic nanoparticle aggregates is achieved. The dramatic changes in the spectral profiles of the fluorescent nanowires are attributed to be due to the fast dynamics surface enhanced fluorescence mechanism.Article Citation - WoS: 4Citation - Scopus: 4Color-Tunable All-Inorganic Cspbbr3 Perovskites Nanoplatelet Films for Photovoltaic Devices(American Chemical Society, 2019) Özcan, Mehmet; Özen, Sercan; Topçu, Gökhan; Demir, Mustafa Muammer; Şahin, HasanHerein, we demonstrate a novel coating approach to fabricate CsPbBr3 perovskite nanoplatelet film with heat-free process via electrospraying from precursor solution. A detailed study is carried out to determine the effect of various parameters such as ligand concentration, electric field, flow rate, etc. on the optical properties. By controlling the volume ratios of the oleylamine (OAm) and oleic acid (OA), the coalescing and thickness of the resulting nanoplatelets can be readily tuned that results in control over emission in the range of 100 nm without any antisolvent crystallization or heating processes. The varying electrical field and flow rate was found as inefficient on the emission characteristics of the films. In addition, the crystal films were obtained under ambient conditions on the ITO coated glass surfaces as in the desired pattern. As a result, we demonstrated a facile and reproducible way of synthesizing and coating of CsPbBr3 perovskite nanoplatelets which is suitable for large-scale production. In this method, the ability of tuning the degree of quantum confinement for perovskite nanoplatelets is promising approach for the one-step fabrication of crystal films that may enable the use in optoelectronics.Article Citation - WoS: 89Citation - Scopus: 85Cspbbr3 Perovskites: Theoretical and Experimental Investigation on Water-Assisted Transition From Nanowire Formation To Degradation(American Physical Society, 2018) Akbalı, Barış; Topçu, Gökhan; Güner, Tuğrul; Özcan, Mehmet; Demir, Mustafa Muammer; Şahin, HasanRecent advances in colloidal synthesis methods have led to an increased research focus on halide perovskites. Due to the highly ionic crystal structure of perovskite materials, a stability issue pops up, especially against polar solvents such as water. In this study, we investigate water-driven structural evolution of CsPbBr3 by performing experiments and state-of-the-art first-principles calculations. It is seen that while an optical image shows the gradual degradation of the yellowish CsPbBr3 structure under daylight, UV illumination reveals that the degradation of crystals takes place in two steps: transition from a blue-emitting to green-emitting structure and and then a transition from a green-emitting phase to complete degradation. We found that as-synthesized CsPbBr3 nanowires (NWs) emit blue light under a 254 nm UV source. Before the degradation, first, CsPbBr3 NWs undergo a water-driven structural transition to form large bundles. It is also seen that formation of such bundles provides longer-term environmental stability. In addition theoretical calculations revealed the strength of the interaction of water molecules with ligands and surfaces of CsPbBr3 and provide an atomistic-level explanation to a transition from ligand-covered NWs to bundle formation. Further interaction of green-light-emitting bundles with water causes complete degradation of CsPbBr3 and the photoluminescence signal is entirely quenched. Moreover, Raman and x-ray-diffraction measurements revealed that completely degraded regions are decomposed to PbBr2 and CsBr precursors. We believe that the findings of this study may provide further insight into the degradation mechanism of CsPbBr3 perovskite by water.Article Citation - WoS: 13Citation - Scopus: 12Orthorhombic Cspbi3 Perovskites: Thickness-Dependent Structural, Optical and Vibrational Properties(Elsevier, 2020) Özen, Sercan; İyikanat, Fadıl; Özcan, Mehmet; Tekneci, Gülsüm Efsun; Eren, İsmail; Sözen, Yiğit; Şahin, HasanCesium lead halide perovskites have been subject to intense investigation, mostly because of their potential to be used in optoelectronic device applications. However, regarding the need for nanoscale materials in forthcoming nanotechnology applications, understanding of how the characteristic properties of these perovskite crystals are modified through dimensional crossover is essential. In this study, thickness-dependence of the structural, electronic and vibrational properties of orthorhombic CsPbI3, which is one of the most stable phase at room temperature, is investigated by means of state-of-the-art first-principles calculations. Our results show that (i) bilayers and monolayers of CsPbI3 can be stabilized in orthorhombic crystal symmetry, (ii) among; the possible ultra-thin perovskites only structures with CsI-terminated surface are dynamically stable (iii) electronic band gap increases with decrease in perovskite thickness due to quantum size effect and (iv) reflectivity and transmissivity of the orthorhombic CsPbI3 can be tuned by varying the thickness that modifies the electron confinement. (c) 2019 Elsevier B.V. All rights reserved.Article Multiferroic Materials: Physics and Properties(Elsevier Ltd., 2016) Buurma, A. J. C.; Blake, G. R.; Palstra, T. T. M.; Adem, UmutMultiferroics are materials in which magnetism and ferroelectricity coexist. They are of fundamental interest to understand electronic behavior coupling magnetic interactions and electric dipolar order. Moreover, they are of applied interest because they allow various types of novel magnetic and electric device structures. We distinguish two important classes of multiferroic materials and discuss mechanisms and materials belonging to each class separately. In the first group of multiferroics, magnetization and polarization arise independently from each other. In the second category of multiferroics, ferroelectricity is induced by magnetic order, resulting in strong magnetoelectric coupling. We also briefly discuss multiferroic thin film heterostructures showing interfacial magnetoelectric coupling interactions with potential applications in memory devices.