Phd Degree / Doktora

Permanent URI for this collectionhttps://hdl.handle.net/11147/2869

Browse

Filters

2009 - 200912010 - 20171

Settings

Department: search.filters.department.Thesis (Doctoral)--İzmir Institute of Technology, Chemical EngineeringSubject: search.filters.subject.Thin films

Search Results

Now showing 1 - 2 of 2
  • Doctoral Thesis
    Experimental and Computational Investigation of Transport Phenomena in Initiated Chemical Vapor Deposition (icvd) Process
    (Izmir Institute of Technology, 2017) Ateş, Selcan; Ebil, Özgenç; Ebil, Özgenç; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    As a polymer thin-film deposition technique, initiated CVD (iCVD) is a heterogeneous process involving gas phase precursors and solid film formation on a solid/liquid substrates at different temperature regions. Obtaining fine-tuned film properties over different substrate geometries at different process conditions is a challenging tasks and requires experimental trials. The major goal of this study is to develop a computational model which describes all relevant transport phenomena occurring in iCVD process, and which is capable to predict the polymer film thickness at different deposition conditions for flat and/or non-flat substrates in a 3D reactor geometry. A Finite Element Analysis (FEA)-based 3D computational model, which can be applied to a variety number of iCVD reactor and substrate geometries, has been developed in the study. To validate the model, reported experimental conditions of 1H,1H,2H,2Hperfluorodecyl acrylate (PFDA) deposition with t-butyl peroxide (TBPO) initiator, and butyl acrylate (BA) deposition with t-amyl peroxide (TAPO) initiator, are applied to the model, respectively. The simulation results of both deposition processes show good agreement with experimental results reported in literature. Presented model successfully describes the relevant transport phenomena, and provides a priori predictions on polymerization rate, and film thickness on complex substrate geometries for a polymerization reaction with known kinetic data. For further studies, presented model can be modified or used as an approach for modeling of other types of CVD systems as well as facilitating process scale-up. The model can also extract valuable polymerization kinetics data provided that a sufficient number of experiments are performed at a specified substrate temperature, and process parameters and measured final film thicknesses are entered to the model.
  • Doctoral Thesis
    Preparation of Hydroxyapatite/Silk Protein Thin Film Implant Surfaces, Investigation of Their Microstructural Properties and Model Protein Interactions
    (Izmir Institute of Technology, 2009) Çiftçioğlu, Muhsin; Çiftçioğlu, Muhsin; 03.02. Department of Chemical Engineering; 03. Faculty of Engineering; 01. Izmir Institute of Technology
    Biocompatible hydroxyapatite (HAp) coatings of load bearing metallic in vivo hard tissue implants act as local scaffolds for enhanced osteoconduction, providing fast bone apposition and cementless fixation. In this study, in an attempt to exploit the potential of hydroxyapatite as a carrier of bone morphogenetic proteins for post operative accelerated healing, and implant durability, the tailored microstructural properties, and protein adsorption capabilities of thin film hydroxyapatite implant surfaces were investigated.A novel particulate sol method was used to fabricate HAp thin films on bioinert glass, and Ti6Al4V substrates by dip and spin coating. The microstructural characterization of the thin films was carried out by SEM/EDX, AFM, XRD, and FTIR, and their surface roughness, Vickers hardness and adhesion strength were determined. The effects of silk fibroin and sericin thin film layers on the HAp film microstructure, and model protein (bovine serum albumin, BSA) adsorption behavior (by the size exclusion HPLC method) were investigated. The minimum threshold solid content of the suspensions was determined as 15% by weight for a continuous HAp film structure. The silk sericin and fibroin intermediate layers drastically improved homogeneity of the HAp layer. The BSA adsorption of the glass/sericin/commercial-HAp film was 2.6 ug/cm2, more than twice of the glass/commercial-HAp, and glass/sericin/dry-milled-HAp films, evidencing the effectiveness of surface micro/nano topographical structure as well as chemical structure. The XRD patterns of spin coated commercial-HAp films on Ti6Al4V pointed out to a particular crystal orientation which increased the positive degree of cooperativity between HAp and proteins during adsorption or deposition.