Phd Degree / Doktora

Now showing 1 - 2 of 2

Properties of Hybrid Fiber Reinforced Concrete for Impact Loading
(Izmir Institute of Technology, 2021) Alami, Mohammad Musa; Saatçi, Selçuk; Erdem, Tahir Kemal
Concrete is a brittle material and does not have significant energy absorption capacity before its fracture. Adding fibers to a concrete mix increases its ductility. Recently, there is significant development in the concrete technology to produce a concrete that can exhibit deflection hardening and show high energy absorption capacity. In this thesis, two kinds of cement based composites with high energy absorption capacity were studied: 1. Engineered Cementitious Composites (ECC). This material can exhibit deflection hardening under bending and it is produced only with synthetic fibers and fine aggregate, 2. Hybrid Fiber Reinforced Concrete (HyFRC). This material can exhibit deflection hardening under bending. It was produced with fine and coarse aggregates and hybrid fibers (both steel and synthetic fibers). The experimental program of this study consists of two main stages. The first stage is to design these composites and test their basic properties in fresh and hardened states, such as compressive strength, flexural behavior, freezing-thawing resistance, chloride ion permeability and sorptivity. In the second stage, dynamic tests (drop tests on small size specimens and pendulum impact tests on real size new generation road concrete barriers with a selected HyFRC mixture) were carried out to determine their energy absorption capacities. Based on the ECC results, fly ash/cement ratio of 1.2 and 20% perlite replacement of sand were selected for HyFRC mixtures. According to the mechanical behavior and durability test results of HyFRC, ST3,0.75_P0.25_D16 mixture (steel fiber type= ST3, steel fiber volume=0.75%, PVA volume=0.25%, Dmax=16mm) was found to have the best performance, and accordingly, this composite was selected for the real-size barrier pendulum test. The same mixture without fibers was also tested under pendulum test as control normal concrete since the present road barriers in the market do not employ fibers. As a result of this study, the HyFRC barrier was found to perform higher impact resistance.
Modeling of Concrete Under High Strain Rate Conditions Using Nonlinear Finite Element Method
(Izmir Institute of Technology, 2017) Çankaya, Mehmet Alper; Saatcı, Selçuk; Taşdemirci, Alper
In this study, a comprehensive experimental and numerical study was undertaken to model concrete under high strain rate conditions. Concrete cylinder specimens, all obtained from the same batch, were tested both under ststic and high strainrate conditions. 15 eylinder specimens were tested under 3.55x10-5, 3.23x10-4, 2.97x10-3 1/s strain rates, whereas three identical specimens were tested using a Split Hopkinson Pressure Bar SHPB) tes setup under 235, 245, 260 1/s strain rates. Used SHPB setup was modified to include quartz crystal stress developed in the specimens werw directly obtained, eliminating common isssues regarding stress readings in a conventional setup. Stress-strain behavior and other material parameters that would be necessary for numerical modeling were obtained under various strain rates. Test samples were modeled using an explicit finite element program LS-DYNA, using Holmquist-Johnson-Cook model with experimentally obtained model parameters. To verify the obtained parameters further, drop tower test on concrete plates were also performed and modeled. Numerical modeling of both SHPB samples and concrete plates were successful in capturing the observed behavior. The study also provided the literature with a reliable test data with complete parameters that can be used for further studies in the area.

Phd Degree / Doktora

Browse

Filters

Settings

Sort By

Results per page

Search Results