Energy Systems Engineering / Enerji Sistemleri Mühendisliği
Permanent URI for this collectionhttps://hdl.handle.net/11147/4752
Browse
21 results
Search Results
Article Citation - WoS: 22Citation - Scopus: 24Design, Evaluation, and Optimization of an Integrated Proton Exchange Membrane and Double Flash Geothermal Based Organic Rankine Cycle Multi-Generation System Fed by a Biomass-Fueled Gasifier(Elsevier, 2024) Taheri, Muhammad Hadi; Seker, Utku; Akkurt, Gulden Gokcen; Mohammadpourfard, MousaThis study introduces an innovative approach by formulating and evaluating a synergistic biomass-geothermal structure, emphasizing optimized inter-component connections. The research stands out for its thorough analysis of parameter impacts on the system and variables, addressing an unexplored aspect in integrated energy systems. The multi-generation systems are the integration of a combined gasification gas turbine cycle, double flash geothermal cycle, and proton exchange membrane cycle for the generating power and hydrogen. The overall system and its subsystems are studied to explore how the performance of thermodynamics and the total cost rate are influenced by operating parameters. The best operational conditions for both subsystems and the overall system have been determined by analyzing the impact of operating parameters on the thermodynamic behavior and environmental impact through parametric studies. The findings indicate while Sabalan's current efficiency is 16.26 %, the system energy efficiency reached 24.89 % when coupled with other renewable source. To enhance the system's efficiency, a genetics algorithm was utilized to simultaneously optimize the total cost of exergy destruction and investment cost. The outcome of the multi-objective optimization revealed that the exergy efficiency of optimal point for the system is 29.8 % and a total investment cost is 6 (M$/year).Erratum Author Correction: the Influence of Nano Filter Elements on Pressure Drop and Pollutant Elimination Efficiency in Town Border Stations(Nature Research, 2023) Heris, S.Z.; Ebadiyan, H.; Mousavi, S.B.; Nami, S.H.; Mohammadpourfard, MousaThe original version of this Article contained an error in the order of the author names, which was incorrectly given as Hamed Ebadiyan, Saeed Zeinali Heris, Seyed Borhan Mousavi, Shamin Hosseini Nami & Mousa Mohammadpourfard. Consequently, in the Author Contributions section, “H.E. Investigation. S.Z.H. Supervision, Conceptualization, Methodology, Validation. S.B.M. Formal analysis, Writing original draft. S.H.N. Formal analysis, Writing original draft. M.M. Validation.” now reads: “S.Z.H. Supervision, Conceptualization, Methodology, Validation. H.E. Investigation. S.B.M. Formal analysis, Writing original draft. S.H.N. Formal analysis, Writing original draft. M.M. Validation.” The original Article has been corrected. © 2023, The Author(s).Article Citation - WoS: 8Citation - Scopus: 11Design, Thermodynamic and Economic Evaluation, and Optimization of Gasoline Production From Refinery Furnaces Flue Gas(Elsevier, 2023) Nazerifard, Reza; Mohammadpourfard, Mousa; Heris, Saeed ZeinaliIn this paper, the conversion of refinery furnaces’ flue gas into gasoline through the MTG process is investigated. This approach not only reduces greenhouse gas emissions, but also produces a high-value product, providing economic incentives to adopt this technology. The proposed integrated system comprises an organic Rankine cycle, an amine-based carbon capture unit, a methanol synthesis unit, and an MTG unit. In this study, we evaluated the technical and economic aspects of this conversion process, including the thermodynamic and cost analysis, to assess its viability as a sustainable solution for mitigating CO2 emissions from refineries. Also, using response surface methodology combined with the Box-Behnken design, the proposed integrated system was optimized to minimize the gasoline production cost. The thermodynamic assessment concludes that the energy and exergy efficiencies of the overall system are 73.12% and 85.24%, respectively. The proposed system yields an annual gasoline production rate of >184 million liters. The estimated total capital investment for the proposed system is 172.16 M$, which the methanol synthesis unit with a share of 48.65% is the most expensive one. The results give a gasoline production cost of 1.58 $/kg or 4.28 $/gal for the optimized case. Also, hydrogen has the highest contribution in the production cost, so with a 20% decrease in the price of hydrogen, the production cost of gasoline decreases by 18.71%. With this rate of technological improvement, reductions in the price of hydrogen seem inevitable in not-so-distant years, which makes the proposed system of converting refinery furnaces’ flue gas into gasoline became desirable. © 2023 Elsevier LtdReview Citation - WoS: 21Citation - Scopus: 23A Comprehensive Review of Computational Fluid Dynamics Simulation Studies in Phase Change Materials: Applications, Materials, and Geometries(Springer, 2023) Soodmand, A. Mohammadian; Azimi, B.; Nejatbakhsh, S.; Pourpasha, H.; Farshchi, M. Ebrahimi; Aghdasinia, H.; Mohammadpourfard, Mousa; Heris, S. ZeinaliThermal energy storage systems (TESS) have emerged as significant global concerns in the design and optimization of devices and processes aimed at maximizing energy utilization, minimizing energy loss, and reducing dependence on fossil fuel energy for both environmental and economic reasons. Phase change materials (PCMs) are widely recognized as promising candidates due to their high latent heat storage (LHS) capacity. This review thoroughly evaluates the computational fluid dynamics (CFD) studies conducted in various sections, encompassing materials, modeling, simulation, as well as the results, advantages, and disadvantages of these works. The study is organized into three distinct sections. The first section discusses the applications of PCMs in various areas, including lithium-ion batteries, solar applications, building applications, electronics, and heating and cooling systems. The second section provides a comprehensive summary of cylindrical, rectangular, spherical, arbitrary shapes, and packed-bed geometries employed in TESS. The third section investigates the different types of materials used as PCMs. Based on the findings of this study, it can be concluded that industrial applications of hybrid nanocomposites incorporating PCMs in different geometries pose challenges, particularly in three-dimensional (3D) settings, where instability becomes a significant concern. Hence, further research and investigation are necessary to address these challenges adequately. In conclusion, this study serves as a reference review for future research endeavors in the field of simulating various PCMs in different geometries and applications. It provides valuable insights into the current state of knowledge, highlights potential areas for improvement, and offers guidance for advancing simulation techniques related to PCMs.Article Citation - WoS: 103Citation - Scopus: 113Preparation and Characterizations of Tio2/Zno Nanohybrid and Its Application in Photocatalytic Degradation of Tetracycline in Wastewater(Elsevier, 2023) Zeinali Heris, Saeed; Etemadi, Martin; Mousavi, Seyed Borhan; Mohammadpourfard, Mousa; Ramavandi, BahmanThe photodegradation of tetracycline antibiotics (TC) in an aqueous solution, using the TiO2 nanoparticles, ZnO microparticles, and TiO2/ZnO composite under the UV lamp in a continuous reactor, was performed. The effects of different parameters, such as the initial TC concentration, medium pH, ratio of each photocatalyst, and the flow rate were comprehensively studied. SEM, EDX, and XRD characterization techniques were employed to study the morphology and structure features of the prepared composite. The results revealed that a more significant amount of TC is not easily removed from wastewater. Furthermore, by increasing the pH of the medium to 11, the efficiency of TC degradation was increased, while the amount of removal remained stable at higher pH values. As the flow rate increased up to 190 mL/min, the removal efficiency increased; however, at higher flow rates, lower efficiency was obtained. Moreover, using multivariate analysis and response surface methodology (RSM), a model for removing TC and the effect of experimental parameters on removal efficiency was proposed. The optimal conditions using the RSM method were found to be the reduction efficiency of 78.94 % in pH = 11 (flow rate of 132 mL/min, and TiO2 concentration of 323 mg) and reduction efficiency of 75.89% in pH = 9 (flow rate of 143.19 mL/min and TiO2 concentration of 312.73 mg). © 2023 Elsevier B.V.Book Part Citation - Scopus: 4Investigation of a New Methanol, Hydrogen, and Electricity Production System Based on Carbon Capture and Utilization(Springer, 2023) Khani, Leyla; Mohammadpourfard, MousaIt is well-known that clean energy transition requires low carbon emission. The increase in population, economic development, and human welfare demands has led to a rise in energy consumption, mainly supplied by fossil fuels. However, burning fossil fuels produces carbon dioxide, which is a greenhouse gas and a contributor to environmental problems. Therefore, carbon capture and conversion to different products have gained attention. On the other hand, combining two or more different thermodynamic systems for simultaneous production of various demands from one energy source looks reasonable. In this regard, a new trigeneration system is proposed to decrease atmospheric carbon dioxide emission and produce methanol, hydrogen, and power. A flue gas stream with a defined composition, solar energy, and atmospheric air are the system’s inlets. Then, mass, energy, and exergy balance equations are applied for each subsystem to investigate the system’s thermodynamic performance. Also, the effect of changing operating parameters on the performance of each subsystem is studied. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.Book Part Citation - Scopus: 1A New Stable Solar System for Electricity, Cooling, Heating, and Potable Water Production in Sunny Coastal Areas(Springer, 2023) Khani, Leyla; Mohammadpourfard, MousaNowadays, more attention is paid to provide clean energy products with low environmental pollution in a decentralized way. Many coastal rural areas suffer from freshwater and electricity scarcity, especially in hot weather condition. Meanwhile, these regions have a great access to intense solar radiation and seawater. Hence, it seems logical to use the available solar energy in those places to provide to necessities like power, heating, and cooling. A new solar cooling, power, heating, and freshwater production system is designed, evaluated, and optimized in this research. The proposed system is composed of several subsystems to generate each product with high efficiency and reliability. Solar energy is unavailable at night, so molten salt energy storage is used to establish the steady operation of the system. Then, the system is evaluated from thermodynamic and exergoeconomic viewpoints, and a parametric study is accomplished to study the effect on the system performance of key variables. In the end, the system is optimized to determine its best operating condition for different cases. © 2023, The Author(s), under exclusive license to Springer Nature Switzerland AG.Article Citation - WoS: 7Citation - Scopus: 7Comprehensive Thermoeconomic Study of a New Solar Thermosyphon-Assisted Multigeneration System(Elsevier, 2023) Anamaq, Rasoul Najafi; Khani, Leyla; Mohammadpourfard, Mousa; Heris, Saeed Zeinali; Gökçen Akkurt, GüldenNowadays, due to the global energy crisis, limited reservoirs of fossil fuels, and their negative environmental effects, the use of renewable energy sources and multigeneration systems have become good alternatives for conventional thermodynamic systems. One of these resources, whose technology has developed rapidly in recent years, is the use of solar energy for the simultaneous generation of various products. Therefore, in this research, a multigeneration system with several subsystems is introduced. The proposed system includes a solar energy collector to receive thermal energy, two thermal energy storage tanks, an organic Rankine cycle, and a Kalina cycle to generate electricity, a multi-effect distillation unit to produce fresh water, an electrolyzer to produce hydrogen, as well as heat recovery for hot water and hot air generation. In this multigeneration system, the cooling unit is designed with the help of a thermosyphon. The performance of the proposed system is studied from energy, exergy, environmental, and exergoeconomic viewpoints using Aspen HYSYS and EES software. The obtained results show that due to the addition of the thermosyphon unit to the refrigeration system, the exergy efficiency increases from 55.62% to 70.26%. As a result of this combination, the performance of the whole system is improved and the amount of costs are reduced. In addition, the parabolic collector system has the highest exergy destruction ratio, 39%, among the subsystems. Furthermore, the results of the exergoeconomic analysis indicate that the PEM water heater with 33.3% and the ejector with 22.7% own the highest cost destruction rates.Article Citation - WoS: 49Citation - Scopus: 51Energy, Exergy, Exergoeconomic, and Exergoenvironmental (4e) Analysis of a New Bio-Waste Driven Multigeneration System for Power, Heating, Hydrogen, and Freshwater Production: Modeling and a Case Study in Izmir(Elsevier, 2023) Tabriz, Zahra Hajimohammadi; Mohammadpourfard, Mousa; Gökçen Akkurt, Gülden; Heris, Saeed ZeinaliToday, the world is facing numerous challenges such as the increasing demand for energy, fossil fuels reduction, the growth of atmospheric pollutants, and the water crisis. In the present research, a new multigeneration system based on urban sewage bio-waste has been designed and evaluated for power, hydrogen, freshwater, and heating production. This system, which consists of biomass conversion subsystem, hydrogen production unit, Brayton cycle, atmospheric water harvesting unit, steam Rankine cycle, and organic Rankine cycles, has been evaluated from a thermodynamic point of view, and the energy, exergy, exergoeconomic, and exergoenvironmental analyses have been carried out on it. In the current study, the atmospheric water harvesting unit, as an attractive and environmentally friendly technology, is integrated with this Biomass-based multigeneration. A case study has been conducted on this system using the information collected from cigli wastewater treatment plant located In Izmir province, Turkey, and the results indicate that such a system, in addition to receiving sewage sludge from the treatment plant unit as a polluting waste, can produce added value products. The modeling results show that in the base conditions and with a feed rate of 7.52 kg/s, the total power generated by this system is 17750 kW, the hydrogen production rate is 3180 kg/h, the freshwater production rate is more than 18 l/h, and the energy and exergy efficiencies are 35.48% and 40.18%, respectively. According to the exergoeconomic and exergoenvironmental evaluations, the unit cost of total products and the unit emission of carbon dioxide are calculated as 13.05 $/GJ and 0.2327 t/MWh, respectively. Also, the results of parametric studies show that increasing the rate of Biomass improves the overall energy efficiency and production rates and also reduces the unit emission of carbon dioxide, but on the other hand, it causes a decrease in exergy efficiency and an increase in the unit cost of total products.Article Citation - WoS: 45Citation - Scopus: 51Experimental Investigation of the Effect of Graphene/Water Nanofluid on the Heat Transfer of a Shell-And Heat Exchanger(Wiley-Hindawi, 2023) Zolfalizadeh, Mehrdad; Heris, Saeed Zeinali; Pourpasha, Hadi; Mohammadpourfard, Mousa; Meyer, Josua P. P.The most common type of heat exchanger used in a variety of industrial applications is the shell-and-tube heat exchanger (STHE). In this work, the impact of graphene nanoplate (GNP)/water nanofluids at 0.01 wt.%, 0.03 wt.%, and 0.06 wt.% on the thermal efficiency, thermal performance factor, pressure drop, overall heat transfer, convective heat transfer coefficient (CVHTC), and heat transfer characteristics of a shell-and-tube heat exchanger was examined. For these experiments, a new STHE was designed and built. The novelty of this study is the use of GNPs/water nanofluids in this new STHE for the first time and the fully experimental investigation of the attributes of nanofluids. GNP properties were analysed and confirmed using analyses including XRD and TEM. Zeta potential, DLS, and camera images were used to examine the stability of nanofluids at various periods. The zeta potential of the nanofluids was lower than -27.8 mV, confirming the good stability of GNP/water nanofluids. The results illustrated that the experimental data for distilled water had a reasonably good agreement with Sieder-Tate correlation. The maximum enhancement in the CVHTC of nanofluid with 0.06 wt.% of GNP, was equal to 910 (W/m(2)K), an increase of 22.47%. Also, the efficiency of the heat exchanger for nanofluid at 0.06 wt.% improved by 8.88% compared with that of the base fluid. The heat transfer rate of the nanofluid at maximum concentration and volume flow rate was 3915 (J/kg.K), an improvement of 15.65% over the base fluid. The pressure drops increased as the flow rate and concentration of the nanofluid increased. Although increasing the pressure drop in tubes would increase the CVHTC, it would also increase the power consumption of the pump. In conclusion, nanofluid at 0.06 wt.% had good performance.
- «
- 1 (current)
- 2
- 3
- »